Frete Grátis em todos os produtos
- [Material] The brake pipes are made of copper plated alloy, and all brake pipe accessories are made of high-quality brass to prevent rust and electroplating corrosion. Durable and durable, suitable for long-term use.
- [Upgrade to 20 Accessories] ① 2 x 3/16 “(7/16-24) inverted pipe nuts; ② 10 x 3/16” (3/8-24) inverted pipe nuts; ③ 2 x 3/16 “(1/2-20) inverted pipe nuts; ④ 2 x 3/116 “(9/16-18) inverted union; ⑤ 4 x 3/16” (3/8-24) threaded union.
- [Bending and Opening] The length of the copper plated brake pipeline is 25FT, which has perfect flexibility, is easy to manually bend, and is also easy to expand with simple tools.
- [Applicable] The 3/16 brake pipeline kit is suitable for most hydraulic brake systems, fuel systems, and transmission systems. It is also widely applicable for industrial, household, and commercial purposes.
- [Widely Used] The 3/16 brake pipeline kit can be applied to most hydraulic brake systems, fuel systems, and transmission systems. It is also widely applicable for industrial, household, and commercial purposes.
BOSCH BC1095 QuietCast Premium Ceramic Disc Brake Pad Set - Compatible with Select Ford Focus; Jaguar XF, XJ; Mazda 3, 5; Pontiac Solstice; Saturn Sky; Volvo C30, C70, S40, V50...
*$597.60
Power Stop 17-1629, Z17 Front Ceramic Brake Pads with Hardware For Durango, Grand Cherokee, GL350, GL450, GLE300d, GLE350, GLE3, GLE400, GLE, GLS3, GLS450, ML, ML350, M [Model...
*$564.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
YAKEFLY 25 ft 3/16 Copper Coated Brake Line Kit with 16 Fittings and 4 Unions Brake Line Fittings,Brake Line Double & Single Flaring Tool Kit,Fits for Most Hydraulic Braking…
*$517.00
Informação adicional
| Manufacturer | YAKEFLY |
|---|---|
| Brand | SUJADE |
| Item Weight | 4.33 pounds |
| Package Dimensions | 10.55 x 10.12 x 2.44 inches |
| Item model number | 674ZDGLTJ001 |
| Manufacturer Part Number | byauto001 |
| Date First Available | September 12, 2023 |
AL1A5 –
I had a break line failure and needed a quality solution. This kit came highly recommended and got the job done. After a few quick videos on youtube, it was game on. The tools worked great, and line was easy to bend. I picked up a small bender from Klein tools to aid in the install. The kit is great to have on hand.
Walker –
This is by far the least expensive kit I’ve used and it’s been over a decade since the last brake lines I’ve done. I cut off two inches to practice a bit and the kit was so easy to use I knocked out a pair of double flares without prep and they were both better than I remember any of mine being before.
NickyNine –
The quality of the kit was OK. It definitely would have stopped a leak had I had the right fitting however I did not. The size of the line was perfect and would’ve fit great but they didn’t have the right size fittings. The flare tool was not that easy to use but create joints that will not leak.
tom regalado –
In a pinch possibly worth using but not on German engineering BMWS.
James Belcher –
This kit worked very well once I figured out what I was doing. A couple YouTube videos and I was able to make perfect flares for the new brake line
Randall Mosley –
Easy to use DIY saved a lot of money comes with all the fittings. Perfect – running and easy can run it just about tied up good
LRC3395 –
Blew the steel brake line that goes from the master cylinder to the rear of my old Ford truck. The line is no longer available, so my only choice was to have one made or make one myself. The local Ford shop wanted $1500 to fabricate the line, which is more than the truck is worth.
It took me a total of 4 hours to do the entire job, including bleeding the brakes afterwards. This kit made perfect flares the fit just like the originals against the fittings on either end.
Mindy Harrison –
Line cutter is cheap and very dull. But the flaring tools work properly.