Frete Grátis em todos os produtos
- ⚙Fit Curved & Flat Windshield – Universal utv windshield wiper kit, The blade does flex a bit, work on the Curved&Flat windshield well, Not Scratch the Windshield.
- ⚙Index Any Position – Snug utv windshield wiper to make it tight, can adjust any Position you want well, fits fairly snug on the windshield and it does a pretty good job at removing rain, snow, mud
- ⚙Easy Installation – Mounts to Hard Coated Polycarbonate or Glass Windshields. You may need to drill a 1/2 inch hole in your windshield before installation
- ⚙No Noise&Friction – Flexible soft layer design reduce noise for silent wiping. Windshield wiper is replaced most manufacturers attaching straps. Will not easy rust or rattle
- ⚙Satisfaction – Not satisfied? Any time, Anywhere and Any reason, sending us a message. We will help you resolve your concern or provide a refund.
Auto Car Wipers 2PCS, 23"+23" Front And Rear Replacement for SAAB 9-3 9-3X 2007-2012, Windshield Wiper Blades Original Equipment Wiper Blade, That Meet OEM Quality Easy DIY...
*$385.00
Unlock 15% savings
*$314.80
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
Valchoose Professional UTV Windshield Wiper Kit, 16” Blade Fit Curved and Flat Windshield Manual Windshield Wiper, Compatible with Polaris Ranger RZR Can Am Kawasaki Honda…
*$421.00
Informação adicional
| Brand | Valchoose |
|---|---|
| Vehicle Service Type | Golf Cart, UTV |
| Item Length | 16 Inches |
| Mounting Type | Pinch Tab |
| Seasons | All |
| Manufacturer | Valchoose |
| Model | Windshield Wiper |
| Item Weight | 1.54 pounds |
| Country of Origin | China |
| Item model number | Wiper003 |
| Exterior | Machined |
| Manufacturer Part Number | Wiper003 |
| Date First Available | February 14, 2023 |
Amazon Mike H. Customer –
Nothing to dislike about this product it was a perfect fit for my side by side, and the price was lower than I expected it to be,
John –
I’m really enjoying the hub! It is low profile and the quick disconnect is confident inspiring but also disconnects with ease when you pull the tab!
G. Hearn –
Just so it’s clear… These are manually operated windshield wipers. They can be used for replacements… Or… Can be added to a vehicle that does not currently have windshield wipers. Can be used on windshields of varying thicknesses. Easy smooth operation.
These manual windshield wipers are made in China and being sold by Chinese company on Amazon.
Malicorneus –
This installed in the plexiglass windshield on my Ranger just fine. Had to be careful drilling into the windshield and I *strongly* recommend first drilling a small pilot hole before using the 1/2” bit.
Interestingly, the arm that you use to wipe the blades is not secured through the bracket. But that I mean the large bolts that go through the windshield and through which the arm slides are fixed solidly by cranking down on the large nuts on either side of the windshield (inside and out). However, the arm slides back and forth through these bolts so by pulling the arm toward you the wiper blades press hard against the windshield, but you can also push the arm away and the wiper blades will separate from the windshield.
I thought this was a bit odd, but I can actually see some logic in it. If the wiper blades were pressed too hard against the plastic, they could easily score it. The wiper blade arms are spring loaded (just like on a car), but they could be too firm and having the ability to slide the arm in and out, is probably a good thing.
It’s entirely manual, so you have to turn the arm yourself, but that is still better than no wiper at all.
Recommended
Hallie Ness –
Fit the car I was working on and they worked well
Terry Duckworth –
The blade itself is fine, but the fitting through the windshield needs a bushing to take out the slack. No detent to hold the wiper means it’s going to bounce around a alot. I’m primarily using it while plowing snow so not a huge deal but i would not recommend it for trail riding. Ok for the price, but I would spend more and find a better option of you are going to use it a lot or use it on a sport machine.
VR –
My windshield has a predefined mounting point. This is OK on my windshield with the existing hole. If the arms were a little big longer or the holes in the windshield were a little better positions, it would improve my experience. I don’t really want to drill a new hole so this is not really a problem with the wiper blades.
Installation is pretty easy. There is a little sleeve that you have to insert in your windshield and tighten in place. You slide the winder arm through the windshield and then tighten it. Its a low-tech and simple solution. Our SxS is really a utility vehicle so I dont have to worry too much about this getting ripped off the windshield by branches and such.
Mary G. –
Easy to install and did a fair job of keeping mud splatter off the windshield. They didn’t hold in place well over bumps though