Frete Grátis em todos os produtos
- 【Clamping up to 3 cables】3 – way car battery terminals can support multiple cables at the same time, which is very suitable for use when installing audio and other equipment, makes the cable only one.
- 【Easy to install】Use wrenche to tighten the wires and to attach the terminal to the post.Just make sure that the positive clip is connected to the positive pole and the negative pole is connected to the negative pole, which is easy to identify the installation and prevent the risk of electric shock.
- 【Wide application】These battery terminal connectors can be used for most 6/12V Cars, Vans, Caravan, Motorhomes, boat, Truck Batteries etc. Just make sure to connect the correct terminal for the correct polarity.
- 【IMPORTANT NOTICE】：Before installation, please make sure that the battery is in a de-energized state. If the original terminal has deteriorated, please replace it with a new terminal immediately.Battery terminals for Cars, caravans, RVs, trucks, houseboats, motorcycles, forklifts, cranes.
- 【You will get】2Pcs battery terminals connectors.I believe our product can fully meet your requirements. If you have any questions, please feel free to come to us, we will provide high-quality guarantee and friendly customer service.
NOCO GBC007 18.5-Inch Boost X-Connect Adapter Extension Cable for GB20, GB40, GB50 and GBX45 UltraSafe Lithium Jump Starters
*$456.30
Battery Terminal Connectors, 12-Way Connectors, 8AWG up to 4/0(XL) AWG Gauge Lead-Acid Car Battery Terminal Connector, Positive and Negative Set for SAE/DIN/EN Tapered Top Post
*$344.90
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
Universal 2pcs 12V Automotive Top Post Car 3 Way Battery Wire Cable Terminals Clamp Connectors,Negative with Protective Cover,Copper Plate with 3 Bolt for Car,Boat,Van
*$277.00
Informação adicional
| Operation Mode | ON-OFF-ON |
|---|---|
| Current Rating | 2 Amps |
| Operating Voltage | 120 Volts |
| Contact Type | Normally Closed |
| Connector Type | Plug In |
| Brand | Cannonfish |
| Terminal | Screw |
| Item dimensions L x W x H | 2.3 x 1.5 x 0.9 inches |
| Circuit Type | 3-way |
| Actuator Type | Rotary |
| Switch Type Ignition Switch | Switch Type Ignition Switch |
| Mounting Type Handlebar Mount | Mounting Type Handlebar Mount |
Rob –
Save your money they don’t make a good connection less then a 1/4 inches on post and the plastic not them don’t help junk
Duane J. –
Used these to replace original cable ends at the battery. Made things very easy to hook back up.
Rene R. –
Buen producto
Jeff Beaver –
Works great and is pretty cheap. Replaced my old deteriorating battery connectors on my 08 Outback, took 15 minutes.
cominatyalive –
Just what I needed!
james jarrett werline –
Good quality. Works well. My issue was the 2 smaller posts were not set in the terminal straight so when I took the plate off it was difficult to line back up and put the terminal back together
Ark9hog –
Not what I was thinking I was going to get
bill c foster –
They were too small for my battery post I should have checked the size so it’s on me I forgot I had bought a different battery for the car so there was a size difference in the post.