Frete Grátis em todos os produtos
- Jumper cable for 12V Portable charger, Built-in 200Amp Fuse Protection
- Wire: 10 AWG silicone 0.08/1050 O.D. 5.0 Red Black; EC5 Male plastic shell blue, fits 5mm Banana plug.
- Replacement jump box cables, fits most brands of mini portable jump boxes, mobile chargers
- Use of car jump starter: 1)- connect the red battery clamp of jumper cable to the vehicle’s positive (+) battery and connect the black to the negative (-) pole, 2)- Plug the cord of jumper cable into the jumper starter’s socket, 3) – and start the vehicle
- Cautions: Do not reverse the operation sequence of jump starter; Do not use jump starter to start vehicle if the number of battery indicators are less then 3 to protect the jump starter from damage; Do remove the product from vehicle within 30 seconds after vehicle is started, or it may cause security incidents.
Radiator Fan Connector Plug for Honda/Inner Male Female Wire Terminal Connector/Waterproof Plastic 6.3mm Series / 1 Set Black 2 Pin
*$277.00
Cabo Extensor Nilight 10003W 14 Ft - Conector Macho para Fêmea, 12V/24V, Carregador de Carro com Soquete para Isqueiro, Vermelho, 2 Anos de Garantia
*$277.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
TPF Booster Jumper Cables Automotive Replacement Battery Jumper Cables Jump Starter EC5 Connector Emergency Jumper Cable Alligator Clamp Booster Battery Clips for 12V Portable…
*$349.00
Informação adicional
| Manufacturer | TPF.COM |
|---|---|
| Part Number | JumperCable |
| Product Dimensions | 12.2 x 0.79 x 0.79 inches |
| Item model number | 4350294551 |
| Is Discontinued By Manufacturer | No |
| Style | Normal |
| Item Package Quantity | 1 |
| Batteries Included | No |
| Batteries Required | No |
| Date First Available | December 21, 2016 |
C. L. L. –
It’s wonderful to be able to replace the jumper cables instead of having to buy the whole set again (and at a reasonable price, too)! I have used them on our family cars, riding mower, etc. It sure beats having to depend on another vehicle to give me a jump start. The delivery time was right on schedule. Thanks!
Stuart Chisholm –
For the first time in a very long time, I went outside to find that my car wouldn’t start. Although it was one of the coldest days of the year thus far, I had just put a new battery into it and it has always performed like a champ! In any case, I wasn’t worried, because I had my trusty lithium-ion jump starter on-board. It was a startling experience, then, when a fully charged jump starter FAILED to get me started! I tried for several minutes. Finally, I called my wife to bring her car around to jump start me in the traditional way. It worked on the first try.
Bringing in my power pack (jump starter), I broke out my multimeter and found that the pack was pushing out the required power, but the jumper cable attachment was bad. That’s when I jumped onto Amazon and found this one. I’m pleased to report that they both fit the receptacle in my Viking unit, but that they deliver the required power and then some! They’re a near match to the original equipment.
What I don’t care for is how short they are. The originals were short enough, but these are even shorter! Also, the clamps seem small n’ flimsy. Again, the originals weren’t all that beefy either, but these are smaller still. That said, they worked without a doubt! I’m thinking of getting a second pair, given that the failure of the old unit was due to some chips frying in the circuit board section of the red lead, which I thought was a fuse holder. (It’s not!) Getting a quick, working replacement at a decent price is peace of mind at a bargain price. Color me happy.
Jason Bourne –
Works amazing with a button for 12v bypass mode. Originally replaced wires that came with my Bolt Power G06C Portable 600 AMP. The 3 schottky diode rectifiers p/n: 42ctq030 on my old cables blew and this was a cheaper replacement then getting each individual component to solder.
Great cables thank you!
Usman Rafay –
good product
Mark Maupin –
The leads worked on my Harbor Freight Viking jump starter. The original set had gone bad. The main comment on this replacement set is the length of the leads. They are so short, it becomes awkward to get them connected to the battery with other items in the way. The original HF set was built wit 8AWG wire. This set has 10AWG wire. Bottom line is I would be glad to pay an extra $5 and get some bigger AWG wire that are a few inches longer.
Shawn P. –
These battery clamps were purchased to replace original plastic clamps that broke. These clamps have a metal hinge, making them a great replacement if your lithium-ion battery jump kit has clamps with plastic hinges. The original plastic clamps literally broke during their first use. These metal clamps have been used several times without worry of them breaking.
Note* I think my purchase was for the Smart version, which was around $16. Apparently there may be a cheaper version for around $8 with plastic hinges as an option when try to checkout…
Elias Tejada –
Excelente
Ahmed O. –
اشتريتها لتكون احتياطي مع جهاز قفز انرجيزر لكن فيشتها الزرقاء احتاجات لبعض التعديل
JOHN L. –
I needed a replacement for my old Aukey jumper pack since the cable fried. It’s a perfect fit. Since sturdier than the original one.
Hal S. –
The cables are at least 10 inches shorter than the original ones. They don’t even reach both terminals in most battery compartments!
I would not recommend these for anybody.