- Dimming for lighting outputs
- External trigger to activate up to 2 outputs
- Battery Voltage display on app screen
- Four 35A circuits and four 18A circuits
- Eight user-programmable switches


Frete Grátis em todo o BrasilProduto Original Importado dos EUA
Switch Pros SP-9100 8-Switch Panel Power System With Concealed Mounting Hardware
*$7,908.00
Informação adicional
Operation Mode | Automatic,Off |
---|---|
Current Rating | 125 Amps |
Operating Voltage | 12 Volts |
Contact Type | Normally Open |
Connector Type | Plug In |
Brand | Switch-Pros |
Terminal | Solder |
Item dimensions L x W x H | 7.65 x 7.65 x 11.98 inches |
Circuit Type | parallel |
Mounting Type | Panel Mount |
Switch Type Push Button | Switch Type Push Button |
DJC –
You can feel the quality in the product when you receive it. It has everything you need in the box, you just need the components you want to switch on and wire them in. Very impressed.
Dave41 –
This is a great product, but my only issue was the vague instructions. I had to watch multiple videos to gather all the info I needed to complete my installation.
Love Me Do –
Very clever product. I have used several other relay based units. This beats them all. Very compact and rugged. Very configurable and able to handle lots of power. Very good instructions and the mobile app does the job. Not super slick but very functional. Not sure why people have so much trouble with it. I have a S20 and it works perfectly. Just wish the power cable was 5/16 so it fitted more PDC 12v connectors.
Mark –
if you’re looking at this product you’ve probably already researched switch pros and similar products and know the benefits and drawbacks of each one. I did pair this with a power trays, ground bar / terminal block and circuit breaker. it works well and the connections and unit seem pretty robust. I went wheeling and got mud all splashed up in my engine bay and had no issues. I like the overlay cover they provide as well. bluetooth works well too. sometimes I have to close and open the app to get my phone to see the switch pros but minor inconvenience and only have to do it once
tip – don’t depin the wiring harness into the cab. just tape some painters tape in a cone and use vaselin to pull it through the firewall
KCG –
Buy once, cry once. Before buying this I tried a Auxbeam. That lasted about 6 weeks. 4 years later, this is still working phenomenally. Robust. Actually waterproof. Feature rich. Easy to use and program. Highly recommended!!
TexasEx –
Very happy with this product. Installed in 2015 Lexus GX and use with Samsung Note 8 tablet. Very easy install. The instructions were clear and well illustrated. The switch hardware is very small and takes up a lot less space in the engine compartment than the SPod. The product (including the Bluetooth module and phone app) worked correctly the first time without any troubleshooting necessary. They provide plenty of wire length for all components, including the switch panel. The app has a lot of great features and adds switch customization options. It is also possible to run the product entirely from your phone or tablet without the physical switch panel if you choose.
Nate Swenson –
I use the Bluetooth app control from my phone to control my lights, dual battery set up and rear cameras. I haven’t had any issues with the app or the SP-9100. I can’t tell you too much about the controller as I do not use it (because I use the app). The only CON is the Bluetooths distance. I can use my phone to control my lights and accessories from about 15 ft. Originally, I had all of my lights (4 light bars and 2 bumper lights) On 5 different switches in front of the shifter on my 2010 Tacoma. My set up worked out great till I was camping in a tent with just a lamp and I could hear something walking around in the wilderness. Now I can use the app to power my lights from my tent. Works especially great when I’m doing recoveries in the night and I need extra light when I’m outside winching. Plenty of uses. Can’t comment on the install as I had Dave from 4WP in Colorado Springs do the install.
Alaskan Paramedic –
Works great! I have no idea how hard it was to install, but it runs all my Baja Designs lights on my overland Tundra. Will buy another one for my Jeep, and maybe one for my adventure van, who knows?
Eryck H. –
I bought this product to consolidate all of my lighting switches on my 4Runner. The material and quality of this product is top-notch and there’s nothing to complain about. The installation process took me about half a day (with lots of break times). It took me a while to figure out how to set this up with bluetooth, but in the end I found out I was pressing the wrong button and it’s not the product’s fault.
At first I thought the Bluetooth was a marketing trick and doesn’t have real world application (as the panel is just right there, within an arm’s reach), but after the recent trip to Big Bear, CA where I let my friend take the wheel and I rode shotgun, I realized that with Bluetooth the passenger can help the driver control the lights, allowing driver to be more concentrated on the road!
All in all, if you have (or planning to) install lights, compressors, fridges, etc in your rig, I definitely recommend this product. It is worth every penny of it!
Cameron –
So I restore Jeeps an was looking at a switch panel to purchase for my personal project. I spent about 4 months reading reviews an forums an ended up buying the SP-9100 an I’m honestly super happy. The panel an control board are a VERY good quality aluminum an they are sealed wonderfully. I am able to use the app an used it to program the switch functions an am overall very impressed with the product. I’ve recommend it to friends over the S-Pod version an can honestly say, for spending $550 I wasn’t let down an haven’t been yet. I have all 8 switches being used; bumper lights, dome lights, reverse lights, spots, floods, rear floods, an front/rear lockers. Can’t say enough of how happy I am with the panel so far.