Frete Grátis em todos os produtos
### Descrição do Produto: Kit de Embreagem Schaeffler LuK RepSet 17-050
O Kit de Embreagem Schaeffler LuK RepSet 17-050 é a solução ideal para quem busca um substituto de embreagem de alta qualidade e confiabilidade. Este kit de reposição OEM é projetado para atender a uma ampla gama de veículos, incluindo carros, caminhões, SUVs, vans, motocicletas, scooters, além de ATVs e UTVs. Cada produto LuK é testado funcionalmente em 100% para garantir que atenda às especificações de desempenho OEM aplicáveis, proporcionando a confiança necessária para o seu veículo.
Como fornecedor de equipamentos originais, a LuK desenvolve as especificações de desempenho para aplicações de veículos individuais. Cada peça OEM é cuidadosamente elaborada para atender às necessidades exatas de um veículo, levando em consideração seu ano, marca e modelo. O Kit de Embreagem LuK RepSet 17-050 inclui todos os componentes necessários para uma substituição completa, incluindo disco de embreagem e peças relacionadas, garantindo que você tenha tudo o que precisa para realizar o serviço de forma eficiente.
Os componentes do LuK RepSet são projetados e fabricados para um desempenho impecável, assegurando que a instalação e o funcionamento sejam realizados sem problemas. É importante verificar a compatibilidade do kit com o modelo, ano e marca do seu veículo antes da compra, para garantir que você está adquirindo a solução correta.
### Instruções de Uso:
Para utilizar o Kit de Embreagem Schaeffler LuK RepSet 17-050, siga as etapas abaixo:
1. Preparação do Veículo: Estacione o veículo em uma superfície plana e segura. Desconecte a bateria para evitar qualquer curto-circuito.
2. Remoção da Embreagem Antiga: Levante o veículo e remova as rodas e a transmissão, se necessário. Desconecte os componentes da embreagem antiga, incluindo o disco e o platô.
3. Instalação do Novo Kit: Coloque o novo disco de embreagem e o platô no lugar, garantindo que estejam alinhados corretamente. Reinstale todos os componentes removidos.
4. Teste de Funcionamento: Após a instalação, reconecte a bateria e teste a embreagem para garantir que está funcionando corretamente.
### Características do Produto:
– Compatibilidade: Adequado para uma vasta gama de veículos, incluindo carros, caminhões, SUVs, vans, motocicletas, scooters, ATVs e UTVs.
– Testes Funcionais: Cada componente é testado em 100% para garantir que atende às especificações de desempenho OEM.
– Componentes Completos: Inclui todos os itens necessários para uma instalação completa, como disco de embreagem, platô e outros componentes relacionados.
– Desempenho Superior: Projetado para oferecer desempenho confiável e duradouro, mesmo em condições exigentes.
### Perguntas Frequentes (FAQ):
Pergunta: O Kit de Embreagem LuK RepSet 17-050 é compatível com meu veículo?
Resposta: Para garantir a compatibilidade, verifique o ano, marca e modelo do seu veículo antes da compra. O kit é projetado para uma ampla gama de veículos.
Pergunta: O que está incluído no Kit de Embreagem LuK RepSet?
Resposta: O kit inclui um novo disco de embreagem, platô e todos os componentes necessários para uma instalação completa.
Pergunta: Como posso garantir que a instalação seja feita corretamente?
Resposta: Siga as instruções de uso cuidadosamente e, se necessário, consulte um mecânico profissional para garantir uma instalação adequada.
Pergunta: O que significa “testado em 100%”?
Resposta: Isso significa que cada componente do kit foi submetido a testes rigorosos para garantir que atende às especificações de desempenho OEM antes de ser enviado ao consumidor.
Pergunta: Qual é a durabilidade esperada do Kit de Embreagem LuK RepSet?
Resposta: A durabilidade pode variar dependendo do uso e das condições de condução, mas os produtos LuK são projetados para oferecer desempenho confiável e duradouro.
Mr Rands –
My application
2006 “mk4” Jetta TDI (BEW engine) 330,000 miles.
I installed this new clutch myself over the course of two weeks. It had everything I needed.
The clutch was exactly like the OEM. It fit perfectly. It works flawlessly. It made the car much easier to drive. Smooth and fun. So much better than before with crazy vibration between 1000-1500 rpm the old one had.
I didn’t own the car when new but now I see how it must have felt like.
The drama and trouble of replacement was mostly due to the old one failing in a catastrophic way that required much time to remove. Replace yours before it fails!
Amazon Customer –
Install the clutch assembly in late August. Very easy to install no alignment tool needed. Clutch worked great for the first five and a half months. It developed a vibration under light acceleration and deceleration. Would not recommend this product. It would be a great value if it lasted longer.
Alfredo –
Excelente el clutch LUK 17-050 , temgo dos dias manejando en ciudad y se siente suave y muy correlon el carro, muy suave la aceleracion, el original era mas agresivo al despegar, pero este nuevo se siente muy bien, muy recomendado, se le quito la vibracion que tenia, ya que el clutch anterior me lo habian reparado, pero no quedan bien, a la larga vibra. este nuevo clutch quedo excelente
Brian –
I contacted the company just to make sure this part would fit (2001, 5 spd Jetta wolfsburg). They were quite willing to answer my questions and let me take as much time as I needed on the phone. I had the items within a week and set to work on installing. The set fit well and installed fairly easily (clutch install can be a big job). The one problem I encountered was the flywheel bolts – a very reliable mechanic friend had said to torque the bolts to 15 lb-ft. As soon as I was getting to 12 lb-ft, the bolts were twisting / snapping. Upon further research, others were saying to torque to 10 ft-lbs which I did and finished the install (I just used two of the old bolts to replace the ones I had snapped). After getting everything back together, the kit performed quite well. The repair was done in order to sell the car as a newer one was bought and the clutch was severely worn on the ’01. Highly recommend this product and seller.
Lifeatthelake –
Installed in an 01 Diesel Jetta, works perfectly. Includes TOB but not the alignment tool shown in pic. Tool is not required, this is a fully assembled clutch/flywheel, no need to take apart to install, relief holes cut in spring fingers so you can access bolts to attach flywheel to crank. New bolts are already pre-installed in flywheel, just bolt her up. This is an extremely well thought out assembly, nothing extra needed and nothing to line up. No pilot bearing included because Mark 4’s don’t use them. LUK and SACHS are the two OEM clutch’s used in MK4 VW’s.
Seth Olson –
Arrived undamaged, no surprises. For clarity: the alignment tool that appears in some of the images is not included, and you don’t need it. The friction plate is centered when you receive the assembly, and it won’t move unless you loosen the bolts holding the pressure plate to the flywheel. The contents of this kit are: the dual-mass flywheel, clutch friction disc and pressure plate (bolted together as one part), a release bearing, and a small packet of spline grease. To corroborate what some others have said, in order to install the assembly all in one piece as intended, your 12mm triple square bit does need to be the long variety. I got the Neiko 10054A set Neiko 10054A 4-Inch Extra Long XZN Triple Square Spline Bit Socket Set, S2 Steel | 10-Piece Set, which worked well. 12mm is the only size you need in extra long for this job, so you could buy just one.
I Installed it a few days ago, and so far I am pleased. The pressure plate springs are somewhat lighter than the OE Sachs unit, making for a relatively light pedal feel, as others have noted. I like it, and it seems to provide at least as much clamping force as the original.
Upon the recommendation of some reviewers, I purchased another release bearing and installed that one, but to my eye the OEM bearing I got (from FCP Euro) and this one were identical.
I did quite a bit of research before choosing this part, and was skeptical at first because of how much cheaper this unit is than the Sachs equivalent and others. However, up to this point I am convinced that this was the right choice and can heartily recommend it.
Me –
A handful of reviews said this feels like a Honda. It only felt like that on mine because the outgoing Sachs clutch with bad throwout bearing gave a stiffer engagement. Brand new, this one did feel very light, smooth, and Honda-esqe, but that was probably just because it was brand new. After 500ish miles, it settled down and feels a lot more like what the Sachs clutch that it replaced (not as light as it felt when brand new but by no-means heavy, stiff, or jerky).
I ordered a different throwout bearing as some reviewers said, and maybe it was a good thing. The one that came with this one had all plastic wear surfaces & clips on the clutch-fork side, while the OEM Sachs (and replacement Shaeffer unit that I used to replace it) had metal in those parts of the bearing. Who knows if the one that came with the kit would have worked, but I just figured to swap it out because pulling the trans is a pain.
About a thousand miles later and drives like the OG Sachs by now!
Rod R –
good product and price and as always fast delivery with Amazon. This fit my 02VW jetta 1.8t perfectly. If you are a DIY’er and a little bit of a mechanic, you can install this yourself and save big money. I was quoted 1700.00 and didn’t include a new rear main seal, clutch fork or new gearbox fluid. I did it all for 300.00 in a long weekend.
D. Child –
Best price you will find on this set and it shipped out on Prime which improves the value. Installation into my MKIV Jetta TDI was smooth. My only problem came from the Throwout bearing which has a plastic retainer tab on the back to hold it in to the clutch fork. The tab broke trying to install it. Luckily it is not critical to function – just for assembly so I used some rtv to hold it in place for the install. That worked without issue. The clutch now has about 10k miles on it since install. The pedal is SUPER light compared to the stock clutch. Holding power is good. My tdi is stock so no insights as to how it would hold up with any mods but for stock I love this clutch and wouldn’t hesitate to recommend it to someone else.
Update 5/22/2017
Now have about 25k miles on the new clutch and it is still smooth and light. Grip is great and I have ZERO complaints or regrets about going with this over a different kit that deletes the DMF.
AggieBud –
I have a 2003 VW Jetta GLS 1.8 Turbo. It takes unleaded gasoline. Note this is NOT a Diesel engine model. This part worked perfectly for me. I’ve had some trouble with Amazon and auto parts. I think they have improved telling you when a product does or does not fit my car. This time they got it right.
As a last minute sanity check, I had the guy who checked my car in look at the part and verify it was right before I caught a ride back home. No reason to leave it behind if it was the wrong part.
The repair shops where I live quoted me between $600 and $700 for parts and about $700 to $900 for labor. I was very happy to find this on Amazon for so low. I ended up paying less than $750 total (part included)!
The repair shop I chose got the kit in no problem in about 6 hours. Not only is my clutch no longer slipping, the shifting in the gears feel so much tighter it is like driving my car back when she was new. I can’t be certain but to me anyway my car also seems much more responsive and easier to drive and handle.
Might be because I babied a slipping clutch for about a year before I found this and took it in, but a new clutch seems to breathe new life back into my aging car.
Most definitely would suggest to anyone.