Frete Grátis em todos os produtos
### Descrição do Produto
Transforme a performance do seu Jeep Wrangler JK (07-18) com o estabilizador de direção dupla Rough Country N3. Este produto foi projetado para oferecer a combinação perfeita de desempenho e estabilidade, garantindo que cada aventura off-road seja não apenas emocionante, mas também segura. Com a instalação fácil e suporte da Rough Country, você pode melhorar o controle e a manobrabilidade do seu veículo em questão de minutos.
O Rough Country N3 Dual Steering Stabilizer é ideal para quem busca reduzir o “bump steer” e as vibrações indesejadas que podem comprometer a experiência de condução. Ao minimizar esses problemas, você não apenas melhora a dirigibilidade do seu Jeep, mas também prolonga a vida útil dos pneus, juntas esféricas e outros componentes da direção. Este estabilizador é uma solução eficaz para quem deseja maximizar a durabilidade e a performance do seu veículo em terrenos desafiadores.
A instalação do Rough Country N3 é simples e direta, permitindo que você aproveite os benefícios do produto rapidamente. Além disso, a confiança que vem com a garantia de substituição vitalícia da Rough Country assegura que você está fazendo um investimento seguro e duradouro.
### Instruções de Uso:
Para instalar o Rough Country N3 Dual Steering Stabilizer, siga estas etapas:
1. Preparação: Estacione o Jeep em uma superfície plana e segura. Levante a frente do veículo com um macaco e coloque suportes de segurança.
2. Remoção do Estabilizador Antigo: Desconecte o estabilizador de direção existente, removendo os parafusos que o prendem ao eixo e à caixa de direção.
3. Instalação do Novo Estabilizador: Posicione o Rough Country N3 no lugar do estabilizador antigo. Utilize os parafusos fornecidos para fixá-lo firmemente.
4. Ajustes Finais: Verifique se todos os parafusos estão bem apertados e faça um teste de direção para garantir que o estabilizador está funcionando corretamente.
### Características do Produto
– Modelo: Rough Country N3 Dual Steering Stabilizer
– Compatibilidade: Projetado especificamente para Jeep Wrangler JK (07-18)
– Material: Construído com materiais de alta qualidade para resistência e durabilidade
– Instalação: Sistema de instalação fácil com montagem em parafuso
– Garantia: Garantia de substituição vitalícia da Rough Country
– Benefícios: Redução de “bump steer”, vibrações e aumento da vida útil de componentes da direção
### Perguntas Frequentes (FAQ)
Pergunta: O Rough Country N3 é compatível com outros modelos de Jeep?
Resposta: Este estabilizador é projetado especificamente para o Jeep Wrangler JK de 2007 a 2018. Para outros modelos, consulte as especificações do fabricante.
Pergunta: A instalação do estabilizador requer ferramentas especiais?
Resposta: Não, a instalação pode ser realizada com ferramentas básicas, como chaves de boca e soquetes. Um guia de instalação é fornecido para facilitar o processo.
Pergunta: O que é “bump steer” e como o estabilizador ajuda a reduzi-lo?
Resposta: “Bump steer” é um fenômeno que ocorre quando as rodas do veículo se movem verticalmente, causando uma alteração na direção. O Rough Country N3 ajuda a minimizar esse efeito, proporcionando uma direção mais estável e controlada.
Pergunta: O estabilizador melhora a vida útil dos pneus?
Resposta: Sim, ao reduzir vibrações e “bump steer”, o Rough Country N3 contribui para uma distribuição mais uniforme do desgaste dos pneus, prolongando sua vida útil.
Pergunta: O que fazer se eu tiver problemas após a instalação?
Resposta: Se você encontrar qualquer problema após a instalação, entre em contato com o suporte da Rough Country, que oferece assistência técnica e pode ajudar a resolver quaisquer questões.
Kurt –
Muy buen producto y muy fácil de instalar.
Kyle Adcock –
Was having problems with light bump steer on my 2017 Wrangler. I put a 4″ lift on it with 33″ tires. The bump steer was not terrible (no death wobble) but was annoying. Easy install and fixed the problem.
Daniel Lippin-Hayes –
Super easy to install, only took about 30 minutes. I’m really happy with how it looks and it works amazing. The fitment is perfect, I had no issues installing it.
Amazon Customer –
2012 2.5INCH ROUGH COUNTRY LIFT, SHOCKS, 33 inch rubber, infamous death wobble! All front end checked, ball joints, track bar new, still happening. Other jeepsters insisted to get rid of the single stabilizer!
Rough Country has been an excellent product on both my 08 & 12, it was a no Brainer to install the RC dual stabilizer! 30minute install!!!
No more death wobble! Smooth and tight steering on and off road!
I WILL REMAIN A DEDICATED ROUGH COUNTRY CUSTOMER! Proven product, cost effective!
THANK YOU RC FOR THE GREAT PRODUCTS IVE INSTALLED SO FAR! The 2012 build gets bumpers next!
Steve B. –
Easy install! Replaced my old pro comp steering stabilizer system. Seems like the steering is much firmer.
Grampa Brian –
Game changer!! Makes driving a non-aerodynamic brick fun again. I often drive long distances and would have fatigue when driving in crosswinds. No more after installing this. Best mod on my JKU!
Steve B. –
I only bought it to avoid death wobble issues due to 37″ tires going out of balance. All my steering and suspension componenets are new and/or tight with no play, yet the tires would induce death wobble. Once balanced the issue dissappeard for a year. Now the tires have worn a bit and the wobble re-appeared. I had the tires re-balanced and all is good but tires can come out of balance off-road or mid-trip somewhere and I was sick of the single stabilizer not being able to prevent the oscillations after hitting some bump just the right way. Looks like a decent product. I do wish the tie rod clamps wrapped around the tie rod more rather than just flat piece of steel and u-bolts. But they do work and were easy enough to install. I had to modify the main bracket as my axle is aftermarket and has a 3″ tube. I also run Synergy trackbar and the driver side stabilizer would hit it on full compression. I relocated it to passenger side and it sits a bit low but it works. For Off-road I can just remove the one stabilizer for more clearance. On stock set up it would look and fit way better and be out of the way. Steering felt a bit more vague at first but nice and tight. After driving it a bit I no longer notice the vagueness. It’s not like JK steering is very “precise” to begin with. The tight, solid feeling in the steering over bumps gives me much more confidence and piece of mind. Stabilizers are made in China so we will see how long the setup lasts.
Shawn Stafford –
So I have KO2 tires 33inch, aftermarket American Racing 17inch wheels. I had no problems what so ever until I installed my 2.5 inch lift. Every pot hole bump road in and around Chicago was an adventure.
I lived with it for about 2 years easy. I finally got sick of it because the roads around me are getting worse and not better. I installed this yesterday and OMG what a pleasure it is to drive my wrangler again.
The instructions suck. I installed this in my driveway without jacking it up. I checked clearance by turning the steering wheel. Took me total about 2 hours getting the old crap off and installing the rough country. I would assemble everything first and then install it makes it a lot easier than piece by piece like the instructions say.
Anyway this is well worth the money.
Charles –
but I will for this! I’m an amateur Jeeper in Colorado. I’ve been wheeling the rocky mountains for a few years now, so I know what to expect from my rig and how to trouble shoot most problems. I’m not the worlds most knowledgeable mechanic, but I am a civil engineer and can figure most things out fairly well. I’ve been dealing with death wobble for months on a 2015 freedom edition. I have a 4 inch lift with 37 inch tires. Only when driving on the road and on a slight turn to the right or left do I experience death wobble. I’ve gone over everything I’m suppose to with the tie rod, drag link, bearings, sway bar, control arms, track bar, pitman arm…all of it. I’ve always steered clear of steering stabilizers as most of my jeep buddies have always told me that they’re a gimmick. Well, I finally decided to give it a try and went with these bad boys for the reviews and price and let me tell you…the death wobble is gone! I was skeptical but its gone. I’ve tried to recreate death wobble by hitting every crack and pot hole (within reason) I could and it completely corrects itself with the stabilizers. As much as I want it to happen and prove everyone right about steering stabilizers, it wont and I cant. My steering is the most firm its ever been and just feels solid now. The install was fairly easy, the instructions have dark black and white pictures so it can be difficult to see what the words are trying to portray at times but all in all wasn’t too bad. I don’t know what else to say other than I’m a believer now. Shout out to Rough Country for making a reliable and cost effective product!
Grampa Brian –
Install is straight forward. It works as it should, but it does not work a Rock Jock tie rod because of it’s 1 3/4“ diameter, and a tapered section on the right side. I had to use 2 u bolts from the rock jock steering stabilizer bracket, one of the kit’s u bolts, and I have to buy a 3rd u bolt to match the rock jock ones. I have a cheap hardware store u bolt on the tapered end right now. That taper causes the right mount to slide farther out than it’s supposed be. I had to weld a piece of steel to the tie rod too prevent the sliding, allowing the u bolts to be tightened properly.
The JKs drag link flip kit comes with a track bar relocation bracket which has a steering stabilizer relocation bracket welded to it. I had to cut that off to make room for this new stabilizer. All said and done, I like the stabilizer. It’s nice off-road on rough rocky trails, and helps with grooves in the highways. It’s a nice product, and I’m not permanently committed to it.