Frete Grátis em todos os produtos
- Compatible with Ford stereo with no Sync: Escape 2006-2007, 2003 – 2010 Crown Victoria, Expedition 2007-2014, Explorer 2006-2010, Explorer Sport Trac 2007-2010, F150 2004-2009, Taurus X 2008-2009, Edge 2007-2010, Mustang 2004-2009
- For Lincoln: MKX (w/ OEM NAV) 2007-2010, Navigator (w/OEM NAV) 2007-2014, Mercury: Mariner 2008-2011, Mountaineer 2006-2010, Sable 2008-2009; Hyundai Sonata 2006-2008
- Feature: Allow to install an aftermarket radio using the existing factory wiring and connectors; Wire harness has been coded that easy to know which one for supply signal and power to the factory amplifiers
- Some vehicles usually requires the red ignition wire power supply from the new radio has to be run separately from the vehicle radio harness; in this case, install will not retain some features like steering audio controls, rear DVD audio, etc. unless extra adapters use
- Easy to install: Take the harness from new stereo and matched up the wire colors; Directly plug without cut or splice anything in the car
Parking Brake Cable Clip Retainer Compatible with BMW 1-4 Series F20 F21 F22 F23 F87 F30 F31 F32 F33 2012 2013 2014 2015 2016 2017 2018 2019 Part Number 34406854898
*$289.00
25.8 Inch Inside Door Handle Latch Release Cable for Chevy GMC Silverado 1500 Tahoe Sierra Yukon Escalade 2007-2014, Replace 924-481, 22862028, 22862029, 22862030
*$286.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
RED WOLF Radio Wiring w/Antenna Adapter RCA Input Replacement for Ford 2006-2012, Lincoln 2006-2010, Mercury 2006-2009 Aftermarket Stereo Install Wire Cable Harness with RCA…
*$337.00
Informação adicional
| Brand | RED WOLF |
|---|---|
| Material | Copper |
| Cable Type | antenna |
| Connector Type | RCA |
| Manufacturer | RED WOLF |
| Package Dimensions | 9.21 x 3.7 x 1.18 inches |
| Item Weight | 3.17 ounces |
| Item model number | CJ001-A |
| Date First Available | August 29, 2019 |
James –
Soldered my radios connector to this adapter and it worked like a champ. The connection was an easy fit. No altercations. Went with the manual and the wire colors matched up fine. Instructions were accurate. They even told me to ignore the brown wires. They’re not in use, but at least they are present if you need them. Antenna adapter was spot on. It all worked great. Value for the money is excellent.
Ron –
It fits my work van well. Good quality. Decent price. Fast shipping too.
cptnamr7 –
This will not 100% work for a 2010 Focus with sync, though I don’t believe Sync is the issue. The red (switched power) wire doesn’t align to anything on the car. But there’s also NO SWITCHED POWER anywhere in the radio on this vehicle. (There’s constant power to the radio face and a relay inside that triggers when the car is started to give it to the radio) My only option was to fuse tap off the sole fuse with the behavior I needed. (Remain powered until door opens) Of which the car has 1- ambient lighting. I was able to locate a wire from 5 of the 8 steering wheel buttons (grey/yellow and the blue/white to ground) but this harness didn’t have a wire in the grey/yellow spot, so had to move a pin is all. Never did figure out the remaining 3 buttons and gave up after I blew a fuse. Found a wiring diagram that implied they required some additional components and I was installing a full touch screen so didn’t care anyway.
Only adding this review to help anyone else facing this same situation. Couldn’t find a single harness anywhere that stated it was for this car and now I know why. It still worked, but required modification and a fuse tap. The other options are like $150 and that’s just dumb.
Gerald J –
The media could not be loaded.
Antenna adapter and main harness worked. although harness for rcas had no application. for my buddies Ford expedition 2007
Tim Johnson –
The remote wire didn’t work and Had to run my own acc wire to make it work. Also the small square piece was wrong and to match the factory other harness had to be another long 10 or more pin harness. Not the small 4pin. Have a 2009escape xlt. It said it was a match. Was not a plug and go situation
Shamzy –
As described
Bryan C. –
The wire harness worked exactly as expected, no surprises! I use the heat shrink solder connections to be sure they stay together. Easy to install and a great value.
Kwynton –
Its a wire harness if it didnt work there’d be some questions.
WD –
This is perhaps my lack of knowledge of the system in my car. However I read in the description it would work with 2009 Mustang however it does not. The back of my shaker 500 radio has three wiring harnesses not two. So this left one harness not used. I plugged everything up to my after market radio and it would not power on. I plugged the shaker 500 radio back in, only using the two harnesses which this products fits, and it would power on, but nothing else, no audio, no cd, no nothing, just the clock. In doing further research it appears I need a harness which can accept all three of the factory harness, not just two. Overall, the product is probably great, the wires are of good quality and the harness does plug into the factory harness well. However if you have an 2009 Mustang with the shaker 500 and there is three wiring harnesses on the back of the radio, this product will not work.
Paul –
Si funciona