Frete Grátis em todos os produtos
- Compatibility : Fits 05-24 Tacoma.
- Important : An alignment is recommended after installing any kit that alters vehicle height.
- Benefit : Space down carrier bearing to reduce tail shaft flange angle, thereby reducing driveline vibration.
- MZS driveshaft spacer kit is made of CNC machined T6 billet, durable & corrosion resistant.
- Installation : Easy bolt-on application, no special tools are needed.
805041A2 Shift Shaft Bushing for MerCruiser MC-I R MR Alpha One Alpha One Gen 2 Stern Drives 23-79373A1 Sierra 18-2622
*$611.40
700R4 TH200-4R Extension Housing REAR SEAL & BUSHING 700R4 700-R4 Turbo 200-4R Transmission
*$503.10
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
MZS Rear Driveshaft Spacer Kit Compatible with 2005-2024 Tacoma
*$433.00
Informação adicional
| Manufacturer | MZS |
|---|---|
| Brand | MZS |
| Model | Drive shaft assemblies R07 |
| Item Weight | 8.1 ounces |
| Package Dimensions | 4.06 x 2.48 x 2.4 inches |
| Item model number | Rear driveshaft spacer R07 |
| Exterior | Smooth |
| Manufacturer Part Number | Rear Driveshaft Spacer Kit |
| Position | Rear |
| Special Features | MZS is a professional supplier who always supply high quality vehicle accessories.Providing the best service and innovative technology always are our pursuing.Once you run into any problem,please feel free to MESSAGE us., MZS rear driveshaft spacer kit are easy bolt-on installation in 1-2 hours without special tools, fit 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 Tacoma |
| Date First Available | July 5, 2021 |
Bill S. –
Works as should
Joyce –
Unfortunately its does not work as stated. I have a 2″ lift in my 2011 Tacoma and was looking for something easy to drop in and fix the common vibration. First I replaced all u-joints and carrier bearing, still vibration, so I tried this. Upon further reading it seems like one must measure the angle and have something made fairly exact to get the shaft back in line, this product does not do that as its thin. Easy install though..
nunyo –
The shims are solid and the bolts are fine but the washers are cheap and not rated for this application. They deformed into the slot in the carrier bearing and never made it to torque. I replaced them with graded and no issues when torqued. Fixed my vibration issue after a 2″ lift on a 2021 Tacoma.
David Kizer –
Would be nice if flat washers were abit larger
ben –
I don’t know why it’s so perfectly shiny. It’s almost sad to hide it away under my truck. But between this and an axle angle shim (you need that too) I’ve finally ended the horrible vibrating after lifting my truck 3.5”.
Well, to be fair I bought 2 of these to drop the bearing enough to straighten out the drive shaft. But that’s my fault for lifting my Tacoma so much.
I will say that yes, the washers it comes with are cheap and will bend, do yourself a favor and spend a few pennies for some better washers at your hardware store.
But that’s hardly something to complain about when the vibration is gone!!!
Brett –
Fixed my 20mph vibration after leveling kit installed. Same flaw as other reviews is washer is dinky and will work but highly suggest a wider and beefier one
Bill S. –
Toyota Truck
Tim Garcia –
I bought these spacers for my Tacoma carrier bearing bracket when I changed leaf springs. The new springs add 2” to the height. I read a lot of reviews about drive shaft vibration after lifting. I installed these at the same time and no vibration at all. I recommend these spacers.
Coty Walters –
2023 Tacoma TRD off road 6 speed manual. Installed a 2” front 1” rear kit, and noticed under braking while in gear there was a pretty good vibration. Lifted many vehicles in the last, but apparently because of Tacoma’s short wheel base, they’re pretty sensitive to small suspension geometry changes. Got a tip to install the carrier bearing spacer and it’s back to driving like new! Yeah it only has 7k miles on it but it’s back to 0!
David Kizer –
The spacers work, definitely helps with the vibration I was experiencing. The only problem I had with them is that the washers supplied with the kit have a small diameter and are quite thin so they get sucked up into the carrier bearing mount hole. I replaced them with more sturdy washers, turned out great otherwise.