Frete Grátis em todos os produtos
- PERFECT FIT – This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car. Gives your vehicle upgraded with this factory look switch.
- HIGH QUALITY – Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that illuminating when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/ LOWER Letters. Easy for you to know the working status
- STURDY DURABILITY – The switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.54″ x 0.83″. It has short circuit protection to protect your vehicles, ensure years of service. Safe and long lasting
- EASY INSTALL – Rated at 3Amp 12V, comes with connector wire kit, easy to install. It is simple to connect the switch: The Green wire goes to the battery, the red w/yellow stripe closest to green wire goes out to the relay; the black wire connects to the ground, while the red w/yellow stripe closest to black goes to the dash
- WIDE APPLICATION – The switch compatible with most model Toyota’s vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits before purchase. COMPATIBLE With: # Toyota FJ Cruiser 2007-2015, #Toyota Fortuner 2005-2014, # Toyota Hilux 2005-2014, # Toyota Tacoma 2005-2011, # Toyota Tacoma 2012-2015 (Left Side ONLY), # Toyota Highlander 2001-2007, # Toyota Tundra 2005-2006 (Center Console if equipped), # Toyota 4Runner 2003-2009, # Toyota Prado 120 Series 2003-2009
250A Change-Over Cam Switch LW26-250/4 Three Gear Universal Four Wire Double Power Supply Motor Forward and Reverse 1Pcs
*$14,596.10
Standard Motor Products RY-1586 Relay
*
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
MICTUNING Backlit Led Light Bar Symbol Push Button with Wiring Kit On-off Switch Replacement for Toyota (White, Surface Size 1.54 x 0.83 inches) – M0810-T-LLBW
*$357.80
Informação adicional
| Operation Mode | ON-OFF |
|---|---|
| Current Rating | 3 Amps |
| Operating Voltage | 12 Volts |
| Contact Type | Normally Open |
| Connector Type | Plug In |
| Brand | MICTUNING |
| Terminal | Button |
| Item dimensions L x W x H | 3.9 x 2.56 x 1.85 inches |
| Circuit Type | 1-way |
| Actuator Type | Push Button |
| International Protection Rating | IP65 |
| Number of Positions | 2 |
| Control Method | App |
| Connectivity Protocol | X-10 |
| Color | White |
| Wattage | 36 watts |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| Global Trade Identification Number | 00608613129257 |
| Manufacturer | MicTuning |
| Controller Type | Push Button |
| UPC | 608613129257 608613129233 |
| Item Weight | 0.634 ounces |
| Product Dimensions | 3.9 x 2.56 x 1.85 inches |
| Country of Origin | China |
| Item model number | M0810-T-LLBW |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | M0810-T-LLBW |
| Bulb Type | LED |
| Special Features | Easy to install, Looks like a factory switch |
| Amperage | 3 Amps |
| Date First Available | April 26, 2015 |
jpsb671 –
I have a 2011 Toyota Tacoma with a 32 inch Nilight LED light bar. The Nilight switch did not fit the vacant slot on the driver side near the steering wheel. This MCTuning switch fits perfectly with no issues. The wiring was really easy. I followed the same wiring set up as the others who purchased this same switch. Their pictures from their reviews were very helpful. (Ground) Black to Black wire. (Signal) 2 Red wires to white wire. (Power) Green wire to Red wire. The switch functions perfectly On/ Off. Keep in mind that the MCTuning switch with light up with you press ON and it will not light up when it press it again off. I’m happy with this replacement switch for my Tacoma.
EKoziko –
Works great, looks good, nice click.
Clayton Sanchez –
Initial impression is awesome. It fits perfect in the Dashboard manufacturer pre-slots of my 2006 Tacoma, and the lights in the switch work perfect. Install was easy, and the diagram is was simple enough to understand.
Put simply, the green and red 1 are for triggering the relay, and red 2 is the positive for the LED. The ground is negative for both.
The light is cool too, the words are lit up always with the dash lights, and when you turn on the device the symbol lights up separately.
BB –
Fits perfect in my 05 4runner. 2 switches in one. The light is blue when not in use and it turn green when you activate it and push it in.
Todd –
I purchased this for my 2000 Toyota 4runner. This is not a direct fit but it works with the bracket I fabricated. I like the quality of the button and the harness but I’m not 100% satisfied with the light output. The icon and letters aren’t evenly lit like in the photo. Both are only partially lit which makes the overall look of them look more cheap then professional. These will work for my application but keep this in mind if your looking for an extremely clean look.
Anthony M. –
Switch itself is pretty nice. Used it in my 2006 Tacoma to turn on/off LED lights I mounted upfront. Whats nice is that when you have the switch on, the backlight does turn on to indicate the switch is engaged. I didn’t wire the switch to my dash lights as I did not want the backlight on constantly. The wiring schematic could be better and show the full circuit, but I had the time so I drafted my own. Maybe it’ll help someone out. Overall fit very well into the spot and look stock.
Clayton Sanchez –
Bought this to fit an OEM style switch in my Tacoma for the lightbar & its very easy to install & fits perfectly in the open switch spot on the left-hand side.
You will need a wire stripper & some crimpers for the cables but don’t make the mistake of running the 2 red wires to the red wire of the light bar. It will turn the light on/off but the led will always be on.
2 switch’s red power wires to the light bar blue wire.
The switch’s green wire goes to the light bar red wire.
Black still goes to black.
This will allow the switch to turn the light bar on/off & the led on the switch to stay off when not in use.
EKoziko –
Button got stuck while just testing it. Opened it up and put it all back together, then the prongs didn’t align with the plug cable. Opened it back up to try and straighten out. Wired it up and plugged it in to see if work, but the button got stuck again. Uninstalled it then promptly threw it onto the driveway. This was indeed the most satisfying part of my purchase, watching this piece of crap explode in to pieces. Satisfying for sure. Picked it up, theb dumped it into the trash so it’s journey to great beyond can proceed.
Pros:
1.really shatters spectacularly when it hits concrete
2. If you feel like wasting a hour of your life, this can hook you up!
Cons:
1. It’s trash
2. Like serious trash
3. I’m done…
4. Nope, it’s still trash
Jack Marshall –
I got this to use with my light bar. I installed the switch easily and it was a cheap and easy upgrade.
Mick Miller –
Bought it on the off chance it’d fit my 97 4Runner. No joy; too small. Seems like a quality switch, tho, so I’m going to check if they have one that will fit my truck.