Frete Grátis em todos os produtos
- Complete kit for a quick repair
- Quickly and easily bonds defogger tab to grid on rear window
- Typical applications include rear window defogger tabs
- Provides a low-cost, high-quality repair for damaged rear window defogger tabs
- Electrically conductive
Padded Dash Filler
*$511.70
Saillong Body Filler Mixing Board Kit, 1 Body Filler Mixing Pad 12-12 in, 3 Yellow Plastic Scrapers (4-5-6 in), 100 Disposable Paper Tear-Off Quick-Mixing Sheets, 1 Pair of...
*$349.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
LOCTITE Rear Window Defogger Tab Adhesive Kit – Easy-to-use, Self Repair, Replace Defogger Tab – 1 Pack
*$274.20
Informação adicional
| Brand | Loctite |
|---|---|
| Specific Uses For Product | Repair |
| Material | Synthetic adhesive compound (plausible inference) |
| Compatible Material | Glass |
| Item Form | Liquid |
Juan Cardenas –
It fix my defrost problem, work as advised or better!
the item arrived damaged, but the seller send me a replacement very quick, Great costumer service!
KBadJeep –
Expensive, but if you drive in winter conditions without defrosting your windows, well you are a danger on the roads. Just my opinion as a professional driver.
Cornette –
My rear defrost stopped working. Took it to a shop and the mechanic said gotta replace the rear window. I found this and figured worth a try. Easy to apply and my rear defrost works like new.
Carol G. –
Needed both rear window defroster tabs put back in place. First used PermaTex. Even after following directions to knead, it was runny and had to be taped into place for 24 hrs to set. It did set up, seems to be holding fine. Not being pleased with the Permatex product, decided to try LocTite which I had to order. Again followed directions, kneading it until correct consistency. Much thicker and applied well. But again it did not adhere within 5 mins as stated on pkg. So it was also taped for 24 hours. It set up a bit faster. Both tabs appear to be staying in place, haven’t had to use defroster as yet. Either product will re-set defroster tabs but take your time, expect to tape them into place for at least 24 hours. It will save an expensive trip to mechanic.
Ayman –
اتبعت التعليمات تماما .. نجحت التجربة وتم الصاق القطعة المعدنية مرة اخرى على الزجاج مع ملاحظة اني قمت بازالة اللحام المتبقي و صنفرته ليكون سطح ناعم نوعا ما قبل تركيب القطعة المعدنية… الان مزيل الضباب يعمل والقطعة ملتصقة بشكل ممتاز منذ شهر تقريبا.
عيبه الوحيد هو ارتفاع السعر النسبي لاستخدام واحد!!
EEE –
I tried this kit twice….twice failed. Looks easy, installs easy but just doesn’t bond well … even after sanding and wiping surfaces with alcohol. Flattened tab and sanded it too…no success. I went for the $50 two part 80% silver epoxy that works well. I also read where a soldering iron can do the trick too, but will wait for the epoxy to fail before I try that one.
TomB –
I had my doubts, but after 2 years the tab has not fallen off, and the window that it’s on is hinged, so
it gets swung open and closed during use. Still attached….
emptyk51 –
Definitely works well and holds to glass!
Amazon Customer –
Worked for a few months.
Fam –
Poor adhesion, never held. Activator in the tube/cardboard applicator did not come out to tip. The paper/cardbiard absorbed the liquid to the sides making direct application to the glass virtually impossible. The glue never dried after 24 hours + due to the weak trace of applicator that made it to the tab and glass.