Frete Grátis em todos os produtos
### Descrição do Produto
O bico de abastecimento KP KOOL PRODUCTS é a solução ideal para quem busca eficiência e praticidade no manuseio de combustíveis. Projetado especificamente para os modelos Pre-Craftsman P10-P500, este bico se encaixa perfeitamente em aberturas de 2 polegadas, garantindo um ajuste preciso e seguro. Fabricado com plástico de alta qualidade, o bico é durável e resistente, ideal para uso prolongado com latas de gasolina vintage.
A embalagem do kit de bico de abastecimento é completa, incluindo um capô de rosca, um plugue de ventilação, um capô de estrangulamento, um capô de parada e uma junta de vedação. Com tudo que você precisa em um único pacote, a instalação e o uso se tornam extremamente simples e diretos. Além disso, ao revitalizar latas de gasolina antigas com nossos kits de bico, você não apenas reduz o desperdício, mas também economiza dinheiro e promove uma alternativa sustentável e reutilizável.
O design do bico de 8,5 polegadas da KP KOOL PRODUCTS garante um derramamento controlado e sem sujeira, enquanto a cor amarela vibrante adiciona um toque de elegância e funcionalidade ao seu equipamento. Este produto é a escolha perfeita para quem valoriza qualidade, praticidade e responsabilidade ambiental.
### Instruções de Uso:
Para utilizar o bico de abastecimento KP KOOL PRODUCTS, siga os passos abaixo:
1. Preparação: Certifique-se de que a lata de gasolina esteja limpa e livre de resíduos. Verifique se o bico está corretamente montado, com todas as peças (capô de rosca, plugue de ventilação, etc.) devidamente instaladas.
2. Instalação: Encaixe o bico na abertura da lata de gasolina, garantindo que esteja firme e seguro. O ajuste deve ser feito de forma que não haja folgas.
3. Abastecimento: Levante a lata e incline-a suavemente para permitir que o combustível flua pelo bico. O design do bico permite um controle preciso do fluxo, evitando derramamentos.
4. Finalização: Após o abastecimento, retorne o bico à posição vertical e remova-o da lata. Feche a lata com o capô de rosca para evitar vazamentos.
### Características do Produto
– Ajuste de Precisão: Compatível com modelos Pre-Craftsman P10-P500 e aberturas de 2 polegadas.
– Material de Alta Qualidade: Fabricado em plástico prime, garantindo durabilidade e resistência.
– Pacote Completo: Inclui capô de rosca, plugue de ventilação, capô de estrangulamento, capô de parada e junta de vedação.
– Sustentabilidade: Reduz o desperdício e promove uma alternativa reutilizável.
– Design Eficiente: Comprimento de 8,5 polegadas para um derramamento controlado e sem sujeira.
### Perguntas Frequentes (FAQ)
Pergunta: O bico é compatível com outros modelos de latas de gasolina?
Resposta: O bico foi projetado especificamente para os modelos Pre-Craftsman P10-P500 e se encaixa em aberturas de 2 polegadas. Para outros modelos, recomenda-se verificar as especificações antes da compra.
Pergunta: O material do bico é resistente a produtos químicos?
Resposta: Sim, o bico é feito de plástico de alta qualidade, projetado para resistir a produtos químicos comuns encontrados em combustíveis.
Pergunta: Como posso garantir que não haverá vazamentos?
Resposta: Para evitar vazamentos, certifique-se de que todas as peças estão corretamente instaladas e que o bico está bem ajustado na abertura da lata.
Pergunta: O bico pode ser usado em temperaturas extremas?
Resposta: O bico é projetado para suportar uma ampla gama de temperaturas, mas recomenda-se evitar exposição prolongada a temperaturas extremas para garantir a longevidade do produto.
Pergunta: Posso usar o bico para outros líquidos além de gasolina?
Resposta: O bico é otimizado para uso com gasolina e combustíveis similares. Para outros líquidos, é importante verificar a compatibilidade do material.
nailer –
Perfect ! Thank You !
Janet K. –
I like no having to figure how to get the gas out of the container, it’s like the old time ways again!!!!!!! Just keeping it simple and easy.
101101 –
No more slow fuel transfer with the glug, glug, glug. Using a step drill it is very easy to drill the holes then the vent plug is pushed in. Works great and refueling is much faster. The longer spouts work great as well and each has a screw on cap. I highly recommend this product. The only drawback that I found was that the package was sent from the US thus the delivery window was slightly longer than anticipated.
z2010m –
I can now use a gas can like you should be able to.
No more EPA low IQ safety BS.
John –
These fit my gas cans quite well. The yellow ring was the right size for one container, while the black ring fit on the smaller container. I was pleased to find out that there was 3 of each in the package. The spout is flexible and the screw on tip with retainer worked well. The only issue I found was the rubber O-ring to seal the spout to the gas can was a hair on the small side for the larger can. But it did not leak so I will wait and see after a few fillups and find out if it still seals. Overall for the money a lot less expensive than buying new gas cans
John –
I bought these because the two new polyethylene gas cans that I bought have spring-loaded pour spouts with safety interlocks. The spouts were constantly falling apart (plastic retaining tabs in the spring-loaded mechanism were deformed and wouldn’t hold) so I found these.
Everything about these things is marginally usable. The seal is prone to leaking if it’s the tiniest bit out of position when you screw the spout on. You won’t know it until you go to use one, at which time it will dribble some fuel. Unscrew the spout, adjust the seal, tighten the spout. That usually fixes it until the next time you fill the can, then you get to spill another dribble of fuel.
The vent caps have a tendency to pop open and occasionally fall out entirely. At least they’re yellow and easy to spot.
The spouts get the job done but are pretty floppy. Problem is, you usually need both hands to handle a 5 full gallon gas can, so pouring without spilling becomes an exercise in creativity.
The caps have plastic rings to hold them on the spout. While this keeps them from getting lost, the rings bind on the spout when you screw the caps on, which means that capping the gas can is a two-hand job (one hand to spin the cap, another to wind the retaining ring around and around).
I’m giving these things 3 stars because they fit and don’t leak (once you get the seal in the right place, that is). In other words, they meet the minimum standards for usability. They work just well enough that I won’t spend the money to replace them, but that’s not saying much.
Zero Signal –
One of my harbor freight jerry can caps popped/broke. This is a perfect replacment.
The moveable spout is better than the one that came with the can.
Jim –
Bought two sets (6) of these in March 2023, I live near the border of a state that sells gas much cheaper than my state so I have six 5-gallon cans I often take with me to fill my other vehicles up with. I liked the extra length on these for refilling my car, however the spouts come with a screen at the base end of the spout and the plastic that holds the screen in place is not made of gas resistant material. It is now July 2023 and these screen holders have begun to break down and crumble and I ended up having to clean my cans out and filter the remaining gas so as not to contaminate my vehicle’s gas tanks with the pieces of plastic that came apart from the screen. The spout itself held together but now I don’t trust it and will use the original ones I have (with a screen) in case there are still some small pieces still left in my cans that I didn’t see.
Jim –
I bought this to replace the nozzle on my 2 gal. Blitz can. See picture of 1 gal. can. The black cap fit and the washer seems as though will work. I’ll know more when I use it to pour gas. I heated a 1/2″ drill bit and was able to melt a 1/2″ hole that fit the vent plug reasonably well. I don’t think that any debris went into the can the way it would if you drilled the hole. It’s a little loose but will not pose any danger. I had to trim the hole to remove debris. When I was finished, I soaked the bit in cold water so as not to affect the temper. I’ll add to this when I know more.
Next Review: I used the can and was disappointed because it leaked. What was also surprising was that both the black and yellow nozzle screw ons’ fit although the yellow one seems to be the best fit. Upon inspecting the Blitz can I noticed a 1/8″ hole on the front side of the screw on stem. I looked at another Blitz can and found the same thing. My wife told that can leaked as well. So the holes are intended, I suppose as vents for when pouring. I put a piece of thin masking tape over the hole a screwed the nozzle back on. No leak. Someday I’ll get around to making a better fix for the hole. So bottom line the kit seems to work fine. I don’t understand the black and yellow screw ons’.
JE –
Newer gas cans that I bought a couple of years ago had safety spouts on them that are difficult to use, short, rigid and narrows the spout to about the width of pencil. I ended up spilling more gas than I ever did with the old straight through spouts. I didn’t want the new safety spout but felt there was no choice since that was all that was being sold around here. Now thanks to Kool Products, I no longer have to hate my gas cans. The long, flexible spouts now allow me to fill my vehicle (the short safety spout couldn’t even get close to my fuel filler neck), and flows rather well. Spillage is also minimized at refill. The kits come complete with two different caps threaded course or fine (3 each), 3 long spouts (with flame arresters/filters), 3 vents for cans without vents (like my safety cans), and three replacement type (attachment), vent caps for my older cans that I can now use again because of this kit), 3 vent caps (no attaching point), and three plastic lanyards. Not only was I able to convert two of my new cans, I was able to repair three of my older cans. If you have safety spouts and hate them, get this, you won’t regret it!