Frete Grátis em todos os produtos
Descrição do Produto: Cabos de Partida para Carro com Adaptador para Bateria DeWalt 20V
Os Cabos de Partida para Carro com Adaptador para Bateria DeWalt 20V são a solução ideal para quem busca praticidade e eficiência na hora de dar partida em veículos com bateria descarregada. Com um design inovador e compatibilidade com diversas baterias DeWalt 20V MAX, este produto é perfeito para motoristas que precisam de um impulso rápido e confiável. Os cabos de 11 AWG garantem uma excelente condução de energia, permitindo que você inicie motores de até 3,5 litros com facilidade.
Características do Produto:
– Compatibilidade de Conversão: O adaptador de cabos de partida é compatível com a bateria DeWalt 20V MAX, incluindo modelos como DCB203, DCB204, DCB206, DCB606, DCB609, DCB606, DCB612 e DCB207. (Bateria não incluída).
– Especificações Técnicas: O produto possui um cabo de 11 AWG, saída DC de 12V 3.0A, e dimensões de 4.8 x 3.2 x 2.2 polegadas. Ideal para veículos de médio porte, caminhões leves e veículos recreativos, entregando energia onde é necessário.
– Fácil de Usar: O processo de uso é simples: conecte a bateria DeWalt, ligue os cabos aos terminais positivo e negativo da bateria do carro, e inicie o veículo. O adaptador possui luz indicadora que facilita o monitoramento do processo.
– Segurança e Confiabilidade: Fabricado com material ABS durável, o adaptador é projetado para manter a bateria firmemente no lugar, evitando solavancos e desconexões. Os cabos possuem alças isolantes para prevenir choques elétricos, garantindo a segurança do usuário.
– Serviço de Suporte: O produto inclui um adaptador DEW20V-JUMP (bateria não incluída) e oferece um serviço pós-venda de 2 anos. Em caso de dúvidas ou problemas de qualidade, nossa equipe está disponível para ajudar em até 24 horas.
Instruções de Uso:
1. Conecte a bateria de 18V/20V/60V ao adaptador; a luz verde acenderá.
2. Conecte os cabos aos terminais positivo (+) e negativo (-) da bateria do carro (apenas para veículos com baterias de 12V).
3. Quando a luz do starter estiver verde, inicie o carro ou aguarde de 3 a 5 minutos para carregar.
4. Após a partida, remova o adaptador da bateria do carro e deixe o motor em funcionamento.
5. Após o uso, desconecte a bateria do adaptador.
Características do Produto:
– Cabo de 11 AWG: Proporciona alta capacidade de condução de corrente.
– Compatibilidade Ampla: Funciona com todas as baterias DeWalt 20V MAX.
– Design Ergonômico: Alças de dupla aderência para melhor manuseio.
– Material Durável: Construído em ABS resistente, ideal para uso prolongado.
– Segurança Aprimorada: Alças isolantes para proteção contra choques elétricos.
Perguntas Frequentes (FAQ):
Pergunta: Este adaptador é compatível com todas as baterias DeWalt 20V?
Resposta: Sim, o adaptador é compatível com todas as baterias DeWalt 20V MAX, incluindo modelos como DCB203, DCB204, DCB206, entre outros.
Pergunta: Posso usar este adaptador em veículos com motores maiores que 3,5 litros?
Resposta: Não, este adaptador é projetado para motores de até 3,5 litros. Para motores maiores, recomenda-se um equipamento específico.
Pergunta: O que fazer se a luz do adaptador não acender?
Resposta: Verifique se a bateria está corretamente conectada e se está carregada. Se o problema persistir, entre em contato com nosso suporte.
Pergunta: É seguro usar este adaptador?
Resposta: Sim, o adaptador é projetado com materiais isolantes e um design seguro para evitar choques elétricos, garantindo a segurança do usuário.
Pergunta: O que está incluído na compra?
Resposta: A compra inclui apenas o adaptador DEW20V-JUMP. A bateria não está inclusa.
Kenya –
This unit fits Makita batteries very well. A 18-20Volt battery is more than enough to turn over small engines with an electric start. This worked really well for that purpose. You could use it on 4 cylinder engines, but don’t expect it to crank an engine over for an extended period of time. You’ll probably melt the wires. Used correctly, this is a great tool.
Todd S. –
I didn’t have a car battery that need to be boosted when I received this so I did some testing with this with a couple marine batteries I had in storage that did need to be charged anyway.
Things that I like/love…
• Clamps/construction was good but not quite as overbuilt as NOCO brand. Still very acceptable
• Got 0.5v after only 5-10 minutes of connection time (used two different meters to verify)
• Hardly wore the battery down at all (9ah)
• While not UL listed, no misleading claims of being FCC part 15 compliant or Intertek tested
Things I don’t really like…
• Instructions a little hard to follow even if it’s kind of self explanatory. Also the mice type was too hard to see even with reading glasses on.
Things I didn’t test….
• Whether it can be used for powering anything other than boosting batteries.
Overall, I like it and think it could save the day if you happen to have any m18 batteries and this device around at the same time which might not always be the case for me personally but I’d take both with me on long road trips.
Aly –
Great jumper! I added this to my car’s inventory should I ever need it.
It works great and functions as it should. There is a voltage regulator built inside to deliver about 13.5 volts. It steps down the voltage from the battery’s 18v to 13.5v.
The wire is on the thicker side and the clamps are easy to handle and use. The length of wire is smaller than other jumpers but it works great so I can’t really complain.
It’s very compact and delivers just enough power if you have a weak but good battery. It does not produce enough power to jump a car with completely dead battery or bigger engines. Overall a great product to have on hand!
Average Person –
Got this to keep in my pickup as I always have milwaukee batteries charged and ready to go. Don’t expect this to be able to boost my Duramax but I used it to jump start my neighbors ford escape at -30 and it saved me from having to take out my booster cables. Also used to jump start my side by side with no issues. The indicator lights are easy to follow and tell you when it is ok to try starting the engine. Would definitely recommend buying this just to have on hand for convenience.
James S. –
I found this to be a very convenient jump starter as it works with all of my Makita cordless tool batteries. I was able to successfully use it to start my car when it’s battery started to die. However when I went to use it on my lawn mower that had sat all winter it would not start it without charging for a long period. My impression was that if the battery is too low of voltage this jump starter will only be able to charge the battery. Which means it doesn’t really have the cold cranking amperage required to start an engine. The other observation I made was that there is no kind of charge indicator for the Makita battery. Given that this starter will be used with a battery that comes off a tool, it would be helpful if it showed how much power the battery had left in it before trying to jump start an engine with it. Overall I am happy with it because it is small, lightweight, and works with my existing tools. It is a great addition to have in the tool box so you don’t get stranded on a jobsite after someone forgot to turn off the headlights.
Farmer G –
Item doesn’t work at all. Lights up like everything is fictional but does absolutely nothing waste of money stay away from this gadget!!
Troy Walz –
works . It doesn’t work the best but I used it once on my 4wheeler. It started it but I had to leave it on there for a hot minute.
Bs –
This jump starter is exactly as described and works great with Milwaukee M18 batteries. It can also jump-start a car using a tool battery. The engine can handle up to 3.5 liters, and it comes with an 11 AWG cable and a 12V 3.0A DC output. The dimensions are 4.8 x 3.2 x 2.2 inches. The jumper starter adapter is compatible with all Milwaukee M18 batteries.
The jumper starter has non-conductive rubber and a dual-grip design, which makes it easier to use and provides better conductivity, tension, and a secure grip. It’s perfect for mid-size vehicles, light trucks, and recreational vehicles, because it can deliver power where it’s needed.
Todd S. –
This product did not work.
Aly –
After installing a backup camera in our old farm truck, we found the battery too low to start our Chevy 350 engine, so we decided to give this new “tool” a test. We hooked this adapter up with a fresh Dewalt 20V battery, and the truck fired right up. It’s a great tool for those times when the battery is just a little too weak to crank over. We did try using it on our old diesel tractor with a completely dead battery, and it wasn’t enough, so it’s best for low but not totally flat batteries.
One thing to note is that the LED indicator stays lit if the Dewalt battery is left plugged in, which could drain it over time. We just unplug it when not in use. Overall, it’s a handy tool to have around the farm for a quick boost when needed, and it saves us from having to drag out the big jumper cables every time.