Frete Grátis em todos os produtos
- COMPATIBLE with Toyota Camry 2.4L 2002-2006, Highlander 3.5L 2008-2013, Sienna 3.3L 2004-2006, Sienna 3.5L 2007-2010, Highlander 3.3L 2004-2007, Camry 3.0L 2002-2006, Highlander 3.0L 2001-2003, Camry 2.4L HYBRID 2007-2011, Solara 3.3L 2004-2008
- [cont.] Highlander 2.4L 2001-2007, Highlander 2.7L 2009-2013, Solara 2.4L 2004-2008, Camry 3.3L 2004-2006 | Lexus RX350 3.5L 2007-2009, RX330 3.3L 2004-2006, ES330 3.3L 2004-2006, ES300 3.0L 2002-2003
- REPLACES ACDELCO A2933C, FRAM CA9360, PUROLATOR A35432, TOYOTA 17801-0H010, 17801-20040, WIX 46673
- IMPROVE PERFORMANCE by changing your vehicle’s air filter at least every 12,000 miles (or as recommended in your car owner’s manual); to ensure your vehicle’s engine has the clean and efficient air flow it needs for fast acceleration and power.
- AVOID INCREASED ENGINE WEAR caused by dirty air intake filters that may allow damaging particles to get into the engine.
MERV 13 Cabin Air Filter with Activated Carbon, CF10743 for Chrysler Town & Country, Dodge Grand Caravan, Nissan Armada/Titan, G25/G35/M45/QX56
*$277.00
Purolator TA23592 PurolatorTECH Air Filter
*$186.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
ECOGARD XA5432 Premium Engine Air Filter Fits 2002-2011 Toyota Camry, 2008-2013 Highlander, 2004-2006 Sienna, 2007-2009 Lexus RX350, 2004-2006 RX330, ES330, 2004-2008 Toyota Solara
*$342.90
Informação adicional
| Brand | ECOGARD |
|---|---|
| Product Dimensions | 12.7"L x 7.9"W x 1.9"H |
| OEM Part Number | ACDELCO A2933C, FRAM CA9360, PUROLATOR A35432, TOYOTA 17801-0H010, 17801-20040, WIX 46673 |
| Global Trade Identification Number | 00674118115354 |
| Shape | Rectangular |
| Manufacturer | Ecogard |
| Automotive Fit Type | Vehicle Specific Fit |
| UPC | 674118115354 |
| Model | XA5432 |
| Item Weight | 6.4 ounces |
| Item model number | XA5432 |
| Is Discontinued By Manufacturer | No |
| Exterior | Machined |
| Manufacturer Part Number | XA5432 |
| Date First Available | December 7, 2012 |
Robot –
Great product. Needed it for my car engine
My two cents –
I bought this for my 2009 Toyota Sienna. It fits perfectly and the quality seems okay. The following are my instructions for a 2009 Sienna in case you’ve never replaced the filter before. Even if you do not have a Sienna I would still advise you to read my instructions as the latter part will still apply no matter what make and model auto you have.
You’ll need a 10mm socket attached to either a drive spinner, extension rod or something similar in order to loosen the two bolts located on the right side of the housing with one in front and the other on the back side. My 6-inch drive spinner was a perfect size to get to the bolt on the back side. Notice I said loosen as they do not need removed. Also, you’ll need to disconnect a few air hoses on the left side of the housing in order to lift the housing away enough to pull out the old filter and put in the new one. TAKE NOTE, if you lift the housing too much it will cause the two connection points on the left side to disengage and you’ll wonder why you cannot replace the housing to its original tight seal when you put it back together. It’s no big deal if you do. Just angle the left side of the upper housing downward enough so the two connection points on it can slip under the opposing connection points on the bottom housing (see picture).
Now the MOST IMPORTANT THING: the filter has a top and bottom and a front and back. Please look at the attached pictures. You can see the old filter with the printing on it to guide you unlike the replacement filter. The easiest way for you to know which side and direction is correct is to look at all four corners of the filter. Only one of the corners comes to a sharper point than the other three. That corner belongs to the front right. Once you’ve got that right and put it in place then, of course, it’s just a matter of putting it all back together. Again, remember what I said earlier about the connection points on the left side of the housing.
I hope my instructions save someone a little time, effort and headache.
Chan –
Exact fit for a 2005 Camry XLE 2.4L.
Easy to install. Recommended for high mileage cars.
Melissa –
Repeat purchase
My two cents –
For 3 years now I only use their filters on my cars both on in cabin and engine and they work great. Highly recommend them
Glenn L Richard –
The value of this product is great feels fits and looks exactly like OEM perfect fit great deal and great seal on my 2008 Camry Hybrid. Very simple to install gives my car an extra 2-3 mpg on the freeway!
Genaro –
Nice air filter, fits my 2008 Toyota Highlander 3.5, well made filter that fits perfectly. Satisfied customer.
Exelente –
Do your research and make sure this is the right filter for your vehicle. I have a 2004 Toyota Highlander and it fit perfectly. Installed in minutes!
Amazon Customer –
It suppose to fit 2010 camrey, but the one i received is bigger than old one, it did not fit in my car.
mike –
Todo bien