Frete Grátis em todos os produtos
- Efficient Fuel Consumption
- Easy installation
- Constructed from high quality material
- Manufactured with precision to meet OE standards
Rear Left/Rear Right ABS Wheel Speed Sensor for Chevrolet Cruze 2011-2016, for Buick Cascada 2016-2019 ABS Sensor No.13470643 1 Pcs
*$325.00
A-Premium ABS Wheel Speed Sensor Compatible with Subaru Models - WRX 2015-2020, WRX STI 2015-2020 - Front Left Driver Side, Replace# 27540VA010, 27540VA011
*$337.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
Denso 234-4355 Honda/Acura Downstream Oxygen Sensor with Auto Trans
*$558.20
Informação adicional
| Brand | DENSO |
|---|---|
| Material | Zirconium |
| Maximum Supply Voltage | 14 Volts |
| Measurement Accuracy | ±1% |
| Mounting Type | Threaded |
| Output Type | electrical signal |
| Specific Uses For Product | Oxygen Sensor |
| Upper Temperature Rating | 1.6E+3 Degrees Fahrenheit |
| UPC | 042511113947 |
| Global Trade Identification Number | 00042511113947 |
| Manufacturer | Denso |
| Style | Modern |
| Model | Oxygen Sensor |
| Item Weight | 3.87 ounces |
| Country of Origin | China |
| Item model number | 234-4355 |
| Is Discontinued By Manufacturer | No |
| Exterior | Machined |
| Manufacturer Part Number | 2344355 |
| Date First Available | January 2, 2007 |
Read write –
I had two codes that set my check engine light. My scanner showed 0.00 volts to my oxygen sensor. This Denso fixed the issue.
Pro tips… an offset 7/8″ sensor socket is very helpful in removing the old sensor. These can be found for under $10 on Amazon and Harbor Freight.
When measuring ohms, the new Denso has 5.8 ohms, just place your multimeter leads on two different connector prongs until you get a reading. If your old sensor reads 0.00 or OL, it is bad.
The hardest part is unclipping the plastic connectors. They are squeeze and pull. Removing the connectors from the bracket helps.
The Denso sensor is assembled in USA from global components and comes with a little tube of anti-seize. For the 2007 Honda Odyssey it fits in the front/bottom of the engine. Bank 2 / sensor 2.
TRVRSHRK –
Worked as replacement for my downstream front O2 sensor in my 2006 Honda Ridgeline RTS. There are four sensors in all, two in front and two on back. Front is the radiator side and back is the firewall side toward the cabin. Bank 1 refers to the three cylinders along the back and Bank two is the set three cylinders on the radiator side. If you have a P0430 code (bank 2 sensor problem) this may fix the issue. The upstream sensors may not go bad as quickly under normal conditions and the codes will not tell you exactly what the problem is when you get the P0430. Could be either sensor or the cat converter itself. A bad cat is highly unlikely. A bad or dirty O2 sensor is very likely. A special offset socket made for getting these off is highly recommended. Also, the harness that the sensor plugs into is attached to a metal bracket on the engine. You MUST get the whole harness off of that bracket (pressing on a realease button on underside) before you can unplug the O2 harness. That is the trickiest part. Do this yourself and you’ll save boatloads of cash for other more fun things.
** It did not come with the black plastic bracket holders in the photo. You’ll have to reuse the existing ones. Afrer unsnapping them from the brackets I was able to cut the bands and reuse them using my own zip ties.
Hamid N. –
Nice
Wonniepooh –
I bought this sensor for an 05 Acura TL with 265K miles that’s been giving an intermittent check engine light on Bank 2. The Denso sensors are OEM and I can get one on Amazon for much less than an Acura branded (Denso) from the dealer.
I recommend getting a good o2 sensor socket and thread chaser, especially for older cars that have had the sensors in place for a long time. It helps to give them a good dose of PB Blaster or other penetrating oil to make the sensor a little easier to remove.
Some o2 sensor sockets have a tough time getting stubborn sensors loose and will round them off, so you can clip the pig tail from the old sensor and use a 22mm deep well socket to break it loose. This is especially helpful for cars form states that get snow, since the salt on the roads will tend to rust the old sensor in place (which is why the thread chaser comes in handy). Look for a kit with the o2 sensor and thread chaser on Amazon. They aren’t expensive and make the job much easier.
Cobra –
PRODUCTO DE EXCELENTE CALIDAD
Wonniepooh –
On my 2007 Honda Odyssey, I’ve been getting P0430 code *INTERMITTENTLY* for the past several months. It did not really seem to have any negative effect on the drivability of the car, so I’ve been resetting it and ignoring it – until it became progressively more frequent:
Nov 2019 @ 119,328 miles
Jan 2020 @ 120,845 miles (39 days and 1,517 miles later)
Feb 2020 @ 121,987 miles (35 days and 1,142 miles later)
March 2020 @ 122,719 miles (30 days and 732 miles later)
So I’ve decided to do some investigations and here is what I gathered:
* Honda Odyssey has 4 O2 sensors: 2 per bank, 1 before the catalyst converter and 1 after.
* The sensor before the catalyst converter is known as “sensor 1” or “upstream”.
* The sensor after the catalyst convert is known as “sensor 2″ or downstream”.
* Bank 1 is where the cylinder 1 is, which for my car is closer to the cabin.
* Bank 2, therefore, is on the front of the vehicle.
Okay, so having said all that, P0430 basically means for Bank 2, the two O2 sensors before and after the catalyst converter are reporting numbers that are outside the expected range. Therefore, possible problems could be:
1) Sensor 1 is bad (e.g. measurement before the catalyst converter is out of range).
2) Catalyst converter itself is bad and is not doing the job (ouch – this can be expensive).
3) Sensor 2 is bad.
4) Some combinations of the above.
After some further research, it seemed like P0430 is most likely due to sensor 2. At 40 bucks, I figured it would be worth the try (and really, for a 13 year old Odyssey with 123K miles, I don’t want to spend hundreds of dollars to get a new catalyst converter).
I went with Denso as it is a trusted OEM brand. As the picture shows, the removed part and the new Denso part are direct replacement. The installation is easy (you will need to raise the car, and you will need a O2 sensor socket), but other than that, it’s pretty straightforward. I am only giving it 4 stars because as you can see in the picture, the wire clips don’t come with the new part. I didn’t want to reuse the old one (and it was super difficult to take them off), so I used zip tie to secure them. You will need 2. TIP: get yourself 2 *LONG* zip ties as they will make it easier to install. There is very little room and you won’t be able to get both of your hands in there to pull the zip ties. Just get the long ones so that you have more room.
I don’t know if it will actually fix P0430 code but after the install, there was no check engine light. I will have to put some miles and repot back.
Edit (Update in January 2021 @ 125,292 miles): Due to the pandemic, I have put only 2,573 miles since replacing the O2 sensor in 10 months. That said, the P0430 code has not come back and it also passed SMOG without any issues. So it’s all good.
Edit 2: (updated in March 2022 @ 134,351 miles.)
Still no check engine light. All good.
Mr. Illumi90 –
Code went away! Good quality.
Huong Ngo –
This Denso Oxygen Sensor fixed the faulty Bank 2, Sensor 2 O2 failure. The mechanic had the Pilot 06 lifted and replaced the sensor from the bottom. The failed code disappeared after the replacement and has not showed again on the dash board. Thanks Amazon for the delivery and the quality merchandise. It saved me money.
Christina –
Fits Tl. Went from up top to remove the old and had to go under to screw it back in because of the O2 sensor socket but once I hand screwed it in, I was good to tighten it with the socket and my my CEL has not come back. Took me about 20min to swap it out
J.L. –
Wrong part for Honda Odyssey downstream oxygen sensor. Wire is too short and plug end is wrong.