Frete Grátis em todos os produtos
Descrição do Produto: CRC Evapo-Rust Gel Remover de Ferrugem, 8 Fl Oz
O CRC Evapo-Rust Gel Remover de Ferrugem é a solução definitiva para a remoção de ferrugem em superfícies verticais, ideal para uma ampla gama de aplicações, desde peças automotivas até utensílios de cozinha e antiguidades. Com uma fórmula de gel eficiente, este produto se destaca por sua capacidade de aderir a superfícies verticais, garantindo que a remoção de ferrugem ocorra de maneira eficaz em metais como alumínio, ferro fundido e aço, sem a necessidade de esfregar ou lixar.
A aplicação do gel é simples e prática: basta aplicar uma camada espessa do produto na superfície enferrujada, deixar agir por 1 a 2 horas e, em seguida, enxaguar com água. O resultado é uma superfície limpa e livre de oxidação, pronta para ser utilizada novamente. Para garantir a eficácia do CRC Evapo-Rust, é importante preparar a superfície removendo partículas de poeira, graxa ou óleo antes da aplicação. O gel deve ser utilizado em superfícies com temperaturas entre 60°F e 90°F para obter os melhores resultados.
- Instruções de Uso:
1. Limpe a superfície enferrujada para remover qualquer sujeira, graxa ou óleo.
2. Aplique uma camada espessa do gel sobre a área afetada.
3. Deixe o gel agir por 1 a 2 horas, ou até que a ferrugem pareça removida.
4. Enxágue a superfície com água para remover o gel e a ferrugem.
Características do Produto:
– Fórmula de Gel Eficiente: O gel adere a superfícies verticais, permitindo uma aplicação fácil e eficaz.
– Remoção de Ferrugem em Diversos Metais: Eficaz em alumínio, ferro fundido e aço, tornando-o versátil para diferentes aplicações.
– Fácil Aplicação: Não requer esfregação ou lixamento, economizando tempo e esforço.
– Tamanho Prático: Disponível em frascos de 8 oz, ideal para uso doméstico e profissional.
– Temperatura Ideal de Uso: Para melhores resultados, utilize o produto em superfícies entre 60°F e 90°F.
Perguntas Frequentes (FAQ):
Pergunta: O CRC Evapo-Rust Gel é seguro para uso em todos os tipos de metais?
Resposta: Sim, o gel é seguro para uso em alumínio, ferro fundido e aço, proporcionando uma remoção eficaz da ferrugem sem danificar os metais.
Pergunta: Quanto tempo devo deixar o gel agir?
Resposta: Recomenda-se deixar o gel agir por 1 a 2 horas, ou até que a ferrugem pareça removida, antes de enxaguar com água.
Pergunta: Posso usar o produto em superfícies quentes?
Resposta: É ideal aplicar o gel em superfícies com temperaturas entre 60°F e 90°F para garantir a eficácia do produto.
Pergunta: Preciso esfregar a superfície após aplicar o gel?
Resposta: Não, o CRC Evapo-Rust Gel foi formulado para remover a ferrugem sem a necessidade de esfregação ou lixamento.
Pergunta: O produto é tóxico ou possui odores fortes?
Resposta: O CRC Evapo-Rust Gel é formulado para ser seguro e não possui odores fortes, tornando-o uma opção amigável para o usuário.
RTW –
Cumpre exactamente!
RTW –
i as not mild rust of my sears tool from USA -still trying
Adam Krause –
No fue posible utilizarlo, parecía chicle , incluso lo devolvi
Gerardo –
Used this to remove a rusted area on my car wheel well where sanding and scraping was difficult. It took a bit longer than the instructions because it was a stubborn area. With some persistence it worked like a miracle! It restored the area to clean bare metal. Now I can repaint.
InMyOpinion –
This product does not have the expected consistency of a gel. When you get it, even if you shake it, it will remain more watery.
This part is important: STIR the “gel” thoroughly—part of the thicker ingredients will still be clinging to the bottom of the container. With this done, it will still be a watery-paste, but it works! It actually works faster than the regular formulation. If you want to leave some if the age of the surface I recommend re-brushing the item every 15 minutes, so it doesn’t settle in one area and to check the progress. Since I do want to retain some surface age, I will wipe and rinse the item throughly and let it dry to see the progress. It is a small bottle but it does go a long way towards many smaller projects.
R P –
Wish I could give this stuff NO STARS!
I was fooled by the pic and didn’t pay attention to 8oz in description. This is a TINY bottle, it’s expensive AND it does not work! At least not for me.
My bottle was NOT a gel. I shook the container well, opened it and poured some into a tray. It was clear like water, same viscosity also. Smells nasty. Then I shook it again it felt weird like something was still in the bottle. I sueezed it over the tray and this white glop began oozing out. It felt like soaked cotton. I literally pulled it out with my fingers, puzzled. This was NOT gel! Looked just like one of the review pictures. Was I supposed to pull this cotten out? What is this? Nothing on label about it.
I had a couple lightly rusted Starrett tools. I put them in the liquid and covered them in the cotton goop. Left them soaking over 7 hours. They still have rust on them! I estimate it took off about 15%. The majority of the rust did not dissolve and their was not a lot of heavy rust. The tools were submerged.
Have to try something else!
This Evapo-Rust is:
1. WAY WAY TOO EXPENSIVE for what you get! Picture is misleading!
2. GOOP or soaked cotton in bottle. IT IS NOT GEL you can apply with a brush! DOES NOT cling to vertical surfaces as stated. Mine was clear liquid that looked like water and smelled horrible.
3. CRC <- Decent name, I love their Brake Cleaner but not Evapo-Rust.
I expected more from CRC.
Didn’t work for me! Will never buy again and I DO NOT recommend it. I’m leary of buying any other CRC product.
Michael L Dudzinsky –
The Evapo Rust Gel performed just as advertised and did an excellent job of removing 13 years of rust off the steel wheels on my RAV4. I was looking for a product that I could apply to the wheels without removing them and that would improve the look of the wheels significantly. The Evapo Rust Gel seemed to fit the bill. I followed the instructions which include using a coarse sandpaper to remove loose surface rust where it was thickest. I applied the gel using a small paint brush. It went on easily and stayed on the vertical rusted surfaces as adevertised. You can see the results from the attached photos. Some other reviews said that the container was small for the price, but I was able to do all fouir wheels and have some left over. I also read reviews that said it was hard to apply, but using the paintbrush worked very well. Also, I saw some complaints about having to sand, but that step is clearly in the instructions and it is necessary. For heavily rusted areas, you need to sand first to get the best results. I didn’t spend a lot of time sanding, just enough to gert the loose rust off. The Gel removed rust off more lightly rusted areas without any sanding. These wheels also had some very deeply rusted areas. While the Evapo Gel did not remove all the rust from these areas, it still made even those areas look much better. If I keep the car for a while, the rust will come back, but I will order this product again. It’s money well spent.
Michael L Dudzinsky –
Does not mix. Was separated as a liquid and a white paste that did not squeeze out of he bottle. Perhaps old or expired product. The liquid counterpart is a good product. I wish I had returned the unused portion; however I discarded it.
Update: Contacted Manufacturer. Manufacturer sending replacement product!
Replacement product usable and works well. Outdated product has obviously hurt the review stats. Outdated product needs to be addressed.
Hardwarenutz –
It applies easily and does an okay job removing surface rust, however in comparison to regular evaporust it doesn’t do as great a job of rust removal. Also, the shelf life of this stuff is really short. I’ve bought three bottles of this stuff and you can keep it unopened for a few months but after that it seems to decompose and goes from the proper consistency to basically an extremely cohesive jello that has almost no adhesive left to it. This also happens when you open the container and use it, it works great when it’s brand new but you can close it up keep it in a cool dry place within the specs and it has the same problem listed above in about 2 weeks if you don’t use it by then. Overall a good product if used right away but not a great product and it doesn’t last long
Mark –
Worked well on surface rust on vintage mid century garden tables and chairs. Applied the gel and let it do its work. The product although effective was not really a gel it was too fluid the cling to vertical surfaces. The photos are after rust removal.