Frete Grátis em todos os produtos
Descrição do Produto: Collinite 631 Fleetcut – Polidor de Compostos Marítimos/RV para Rotary
O Collinite 631 Fleetcut é um polidor de compostos de alta performance, projetado especificamente para uso em máquinas rotativas, ideal para situações de forte negligência em superfícies de fibra de vidro, gel coat e alumínio pintado. Este produto é a escolha perfeita para quem busca restaurar a aparência original de embarcações e veículos recreativos que sofreram com a oxidação, arranhões menores, marcas de redemoinhos, manchas e névoa de compostos. Com a capacidade de remover marcas de lixamento superiores a 1.000 grits, o Collinite 631 se destaca como uma solução eficaz para a recuperação de superfícies desgastadas.
Para o uso em polimento, recomenda-se a utilização com máquinas de dupla ação (DA) em casos de negligência leve e manutenção sazonal. O polidor é formulado para eliminar defeitos moderados a pesados, proporcionando um acabamento brilhante e duradouro. A sua aplicação é simples e direta, permitindo que tanto profissionais quanto entusiastas consigam resultados excepcionais com facilidade.
Instruções de Uso:
1. Preparação da Superfície: Antes de aplicar o Collinite 631, certifique-se de que a superfície esteja limpa e livre de sujeira ou detritos. Lave a área com água e sabão neutro, e seque completamente.
2. Aplicação com Rotary: Aplique uma quantidade moderada do produto em um pad de polimento adequado para máquinas rotativas. Comece em uma área pequena, utilizando uma velocidade baixa para espalhar o produto uniformemente. Aumente a velocidade gradualmente e trabalhe em seções de aproximadamente 60 cm x 60 cm, aplicando pressão moderada.
3. Remoção do Produto: Após o polimento, utilize um pano de microfibra limpo e seco para remover o excesso de produto, garantindo que não restem resíduos.
4. Finalização: Para um acabamento ainda mais brilhante, recomenda-se seguir com um polidor de acabamento após o uso do Collinite 631.
Características do Produto:
– Tipo de Produto: Polidor de Compostos
– Uso: Rotary para compounding; DA para polimento
– Defeitos Removidos: Oxidação, arranhões menores, redemoinhos, manchas e névoa de compostos
– Marcas de Lixamento: Remove marcas superiores a 1.000 grit
– Superfícies Recomendadas: Fibra de vidro, gel coat, alumínio pintado
– Formato: Disponível em embalagem de 473 ml
– Fácil Aplicação: Fórmula que permite uma aplicação simples e eficaz
Perguntas Frequentes (FAQ):
Pergunta: O Collinite 631 pode ser usado em superfícies não pintadas?
Resposta: Não, o Collinite 631 é recomendado apenas para superfícies de fibra de vidro, gel coat e alumínio pintado.
Pergunta: Qual é a diferença entre o uso com rotary e DA?
Resposta: O uso com rotary é ideal para compounding em superfícies com forte desgaste, enquanto o uso com DA é mais adequado para polimento em casos de manutenção leve.
Pergunta: O produto pode remover arranhões profundos?
Resposta: O Collinite 631 é eficaz na remoção de arranhões menores e marcas de oxidação, mas não é recomendado para arranhões profundos que exigem reparo mais intenso.
Pergunta: É necessário usar um selante após o polimento?
Resposta: Embora não seja obrigatório, a aplicação de um selante após o polimento pode ajudar a proteger a superfície e prolongar o brilho.
Pergunta: O Collinite 631 é seguro para uso em todas as cores de pintura?
Resposta: Sim, o Collinite 631 é seguro para uso em todas as cores de pintura, desde que aplicado corretamente e em superfícies recomendadas.
BH1234 –
Worked great removed heavy oxidation
Berq Berqelson –
I’m not the most well-versed polish user, but I know a perfected surface when I see it. From what I can tell, if used on the intended materials, Collinite No. 631 will do a fine job of glossifying your lightly scuffed surfaces.
Because I enjoy using the wrong things to accomplish tasks, I first used No. 631 to buff a piece of marble that had served many years as a plant stand. It made no real difference after a few minutes of work with the electric polisher.
Next, because Collinite No. 631 is SUPPOSED to be used on fiberglass, I used it on some scratched-up fiberglass rods. The deeper scratches remained (as one would expect), but they appeared smoother overall after a relatively short buffing.
And even though the bottle doesn’t specify use on epoxy resin, I tried it on a formerly glassy resin countertop. Again, I don’t expext a fine-grit polish to do much for deeper scratches and dings. The satin scuffs, however, began looking more like semi-gloss after just a minute or so. I’m sure it could have been made to look even nicer had the motor in my underpowered polisher not started to smoke.
If you need a compound for the surfaces Collinite No. 631 is made to polish (e.g. boat hulls), give it a try – there’s a good reason the company has been around since 1936. Just make sure your polisher isn’t as junky as mine.
Bubbagump123 –
This was a good compliment to meguiars heavy cut M100, I am restoring a 25 year old boat and even though this said medium to heavy, I’d say this collinite is more medium and a nice compliment to a heavier cut before using this. I other words my recommendation is to use something heavier to do your initial cut and then follow with this which offers a nice medium cut with shine.
Justin R. –
The media could not be loaded.
I am pleased with this compound and polish from Collinite. It works well at both tasks. It removed heavy oxidation from a small launch boat I have laying around (see attached video). It can’t remove the deep gouges, but I didn’t expect it to. It left it with more color and on the smooth areas it looked good.
It is easy to use. The amount of compound required was not a lot at all, which makes it a good value. On a much nicer vessel than mine, its effectiveness will be able to be seen better.
Overall, it is a good value for a quality product.
Berq Berqelson –
Though “Collinite Marine FLEETCUT Polishing Compound #631” is packaged for professional boat detailers, every boat owner should understand the basics of surface preparation. Boats are made of a mixture of soft polyester resin and a white or colored pigment. After exposure to sun, the surface has a rough powdery look. This product is meant to “cut” off the exposed layer leaving a smooth surface for applying a fresh coat of Collinite wax. It is intended as a combined intermediate and final buffing using a grit that performs the intermediate cut then disintegrates into finer particles to create the final finish. It contains oil which fills small pores to save on absorption of wax. It is meant to be applied with a micro fiber pad and a dual action random orbit polisher.
Used as intended, this is the finest, easiest, fastest and most economical way to get a mirror shine on a boat. Instructions to do so are included on the bottle. As with all professional products, care must be taken. This product is not for polishing metal, paint or clearcoat. Attention to detail is necessary to achieve the proper outcome.
Highly recommended.
Menah Jane –
I am not the best at keeping up with the wax on my boat so I get a lot of oxidization from time to time. I tried this product with my rotary polisher/sander and my DA polisher/sander. Using the different tools with this product yielded slightly different results. For the really heavy stuff the straight up rotary polisher seemed to cut through were the DA seemed to be inconsistent. Where the oxidization was moderate to light the DA seemed to work great and made it fairly shiny and ready for wax or a cleaner wax. I was very satisfied with the results. I tried this on my sons oxidized headlights as well by using my 3″ rotary polisher from 500/800/1000/2000 grits and then used this product and it seemed to do very well. It took the last of the faint swirl marks out with a little polishing a patience. It is very on par with other products I used for gelcoat.
Menah Jane –
Had an old fiberglass bathtub that was stored outside with severe weathering and oxidation which made a good test subject for this cutting compound. I did three separate passes with an orbital polisher, black deep cut pad which left a wet glossy finish. Ultimate compound took two passes to achieve similar results, although not as glossy looking as the Collinite, the finish didn’t fade after a couple days in the sun. Both compounds pass the eye test from a few feet away but looking closer at the finish I could see light swirl marks on the Ultimate compound side. The UC probably needed another pass but I wasn’t basing the comparison on which one achieved a smoother finish but how quickly they could remove heavy oxidation. The Collinite compound did a great job, just not as effective as UC.
Kazmania –
Ordered this for my stainless steel fridge it works great, that appliance has never looked better. I have also used this on a heavily tarnished silver alto saxophone and it worked amazing this product is cutting down on my restoration time and making that silver look like it was just cast today not 108 years ago. Has not harmed my metals and has already become my new best friend with my old sax. DO NOT use on a painted surface this is for BARE metals such as stainless steel, silver. gold, copper, brass. I use this with a Dremel and have had no problems with this compound scratching or discoloring the metal when used at medium to medium low speeds and light pressure.