Frete Grátis em todos os produtos
### Suporte para Celular para Carro: Praticidade e Segurança em Cada Viagem
Descubra a liberdade de dirigir com segurança e praticidade com o nosso Suporte para Celular para Carro. Este produto inovador é ideal para quem busca uma solução eficiente para manter o celular acessível e visível durante a condução. Com um design escalável e um braço longo, ele se adapta a todos os tipos de smartphones, mesmo aqueles com capas mais grossas. O pacote inclui dois suportes, garantindo que você tenha um para cada carro ou para compartilhar com um amigo.
#### O que você recebe na caixa?
– 2* Suporte para Celular [Compatível com Capas Grossas]
– 1* Ventosa [Super Absorção]
– 1* Clipe para Ventilação do Carro
– 1* Organizador de Cabos e Pano de Limpeza
#### Ventosa Super Poderosa: Materiais que Fazem a Diferença
A ventosa é fabricada com três camadas de gel adesivo nano, que previnem a formação de espaços de ar e suportam temperaturas que variam de -44°F a 194°F. Com uma potência de sucção aprimorada de até 80LBS, ela segura celulares pesados com facilidade. Para restaurar a aderência, basta enxaguar com água.
#### Compatível com Celulares Grandes e Capas Grossas
Os braços do suporte possuem mais de 20mm de espessura, tornando-o compatível com a maioria dos smartphones e capas grossas, incluindo modelos como iPhone 15/15 Pro/15 Pro Max, Samsung Galaxy Note 20/S20, entre outros.
#### Rotação de 360°
O suporte para celular conta com uma junta esférica ajustável que permite rotação de 360° em todas as direções, proporcionando ângulos de visualização ideais. O braço telescópico ajustável pode ser estendido até 10,55 polegadas (268mm), permitindo que você posicione seu celular na distância desejada.
#### 2 Suportes e Acessórios Extras Inclusos
Além dos dois suportes, você receberá acessórios adicionais, como um organizador de cabos exclusivo e um pano de limpeza, garantindo uma experiência completa e prática.
### Instruções de Uso:
1. Instalação da Ventosa: Limpe a superfície onde deseja fixar o suporte. Pressione a ventosa firmemente contra o painel ou vidro do carro e puxe a alavanca para garantir a fixação.
2. Ajuste do Suporte: Insira o celular no suporte, ajustando a largura conforme necessário. Para celulares com capas grossas, certifique-se de que o suporte esteja bem ajustado.
3. Posicionamento: Utilize a junta esférica para girar o suporte e encontrar o ângulo de visão mais confortável. Ajuste o braço telescópico para a distância desejada.
4. Manutenção: Para restaurar a aderência da ventosa, lave-a com água e deixe secar antes de reutilizar.
### Características do Produto
– Material da Ventosa: Gel adesivo nano de 3 camadas
– Capacidade de Sucção: Até 80LBS
– Compatibilidade: Suporta smartphones com espessura superior a 20mm
– Rotação: 360° com junta esférica ajustável
– Comprimento do Braço: Até 10,55 polegadas (268mm)
– Acessórios: Inclui organizador de cabos e pano de limpeza
### Perguntas Frequentes (FAQ)
Pergunta: O suporte é compatível com todos os modelos de celular?
Resposta: Sim, o suporte é compatível com a maioria dos smartphones, incluindo modelos com capas grossas.
Pergunta: A ventosa realmente segura celulares pesados?
Resposta: Sim, a ventosa possui uma capacidade de sucção de até 80LBS, garantindo que mesmo celulares pesados fiquem firmemente fixados.
Pergunta: Como posso restaurar a aderência da ventosa?
Resposta: Basta enxaguar a ventosa com água e deixá-la secar antes de reutilizá-la.
Pergunta: Posso usar o suporte em diferentes locais do carro?
Resposta: Sim, o suporte pode ser facilmente removido e reposicionado em diferentes superfícies, como o painel ou o vidro do carro.
Pergunta: O suporte é fácil de instalar?
Resposta: Sim, a instalação é simples e rápida, sem necessidade de ferramentas adicionais.
Courtney Scott –
I got this phone holder for a new car that didn’t have one yet, so I could use it for navigation. I had to try a few different locations and I think moving it reduced the stickiness of the mount so the second place I tried, which I thought would be its final place (to the right of the steering wheel) didn’t stick. The stickiness of the silicon suction cup had weakened, and the suction wouldn’t help it stick probably because of the non-smooth dashboard surface. It stayed there for a few days but then fell down on its own. I now put it in the bottom corner of the windshield on the drivers side and that seems to allow the suction to work so I think it will stay there. Note that this product is actually basically two phone mounts. The second one is a vent mount and I put that one in a different car so that was useful. The button on the back opens up the clamp to put your phone on the mount, and then it ratchets closed to secure the phone in place. It seems to work well to hold my phone. It seems like a good product. The only thing that might make it better is if it had a wireless charging function as well, though charging with a cable will work fine because there’s a gap for the cable to plug into the phone at the bottom.
Andrew O –
I don’t know why it never occurred to get me one of these phone cradles. It makes it so much easier. Anyhow, I was worried that it would be bulky, but it is not. So far so good, it has suctioned onto my dashboard pretty good. Easy to use and easy to put together, though it took me a second to figure it out since there were no instructions – it would had been helpful to have. The two pack is a bit strange, not sure what to do with the other one. I guess so I have it in case something happens to the other one? Price for two with a wire organizer is pretty good but it’s a bit weird that they’re two different ones…. I guess it’s for people who have two phones? Anyhow, if this is you… then this is likely a good buy for you!
Bonopoly –
– Suction cup holder tends to fall off for me
+ Two phone holders, large enough for my 80mm / 3″+ phone.
Two options for mounting, however, the vent option does not fit my vehicle.
Fell with my phone several times, ended up minimizing the telescoping distance and setting the phone holder directly on the dash so that it wouldn’t have much force on the suction cup, which was OK for a about 90 minutes of driving so far.
Putting 3 stars for now, I’ll update to 4 stars if I can get it to work as expected.
Kimberly O. –
This phone holder mount is sturdy and versatile, and it’s built with arms that ensure a secure grip on your phone. I appreciate the adaptable design for mounting on your dashboard or windshield, which is convenient if you want to test different places to put it in your car.
That said, it is a bit bulky, so if you’re going for a streamlined look, this might not be your favorite. Inserting and removing your phone can be tricky, especially if you’re in a rush or driving and need to grab it quickly.
Still, it’s durable, versatile, and keeps your phone from falling into that dreaded space between your seat and center console. Personally, I prefer this over magnetic mounts, which usually require me to remove my case to get a decent grip. This one solves that with expanding side arms and a bottom lip that supports your phone and keeps it from slipping.
I’d recommend it to anyone looking for a long-lasting option that works with different phone sizes and cases.
Kimberly O. –
What a versatile cell phone holder! Eluseastar didn’t forget anything. In the box is a suction cup base that rotates 360 degrees, a telescoping arm that can be adjusted up or down and forward or backward, and not one, but two, adjustable cradles. There’s also a base which can be clipped to the air vents, and an organizer to keep your cords neat and tidy. They even provided a couple of wipes for preparing the surface where the holder will be attached. Between the 2 bases and 2 phone cradles, you’re getting 2 phone holders in one package.
Once adjusted, you can fix the position of the arm with a pair of sturdy knobs. To rotate the base, just flip up the small lever on top of it. Inserting the phone into the cradle is accomplished with a simple press of the button on the back of the cradle. The side supports will slowly move apart while you hold the button. Release the button and the supports will stop moving and remain fixed in place. The cradle can be rotated 360 degrees with the phone inserted.
My phone is pretty large and its Otterbox just increases the width. It’s difficult to find a phone mount that will fit. Both cradles fit my phone with room to spare. My car’s dashboard has no place to put a cell phone holder and so my only option was to use the vertical space above the glove box. The Eluseastar car phone holder had no problem with remaining in place while gripping the vertical surface. It can also be mounted to a windshield.
The only con is there are no instructions indicating how to remove the suction cup base. I had to watch videos for similar products to see that the same lever used for rotating the base should also be lifted for removal.
Andrew O –
In this car phone holder package is like getting two for the price of one. There are two phone holders and three different ways to mount them. One mount has a sticky reuseable suction cup for the dash, one is an air vent clasp mount, and the third one is an adhesive flat mount 2 inches long and 1.25 inches wide. Both of the phone holders are adjustable to fit your phone up to 3.625 inches wide and with the bottom extension fully opened the length is 4.875 inches. It comes with the wet and dry wipes to prep the installation areas.
This is a great package deal that gives you several options. It is good quality and does take into consideration that every car is different and a buyer may need more than one option. I like it – it works!