Frete Grátis em todos os produtos
- 【Widely Applicable】: The positive and negative electrodes have the same appearance, with different hole diameter sizes. The positive pole hole is 0.75 inches (19mm) in diameter and the negative pole is 0.67 inches (17mm). They are suitable for most car models, such as sports cars, minivans, SUVs, large vans, trucks, taxis, etc. Please check if the size matches your car before you buy.
- 【Common Specification】: In the battery cable terminal clips, the red plastic casing is the positive battery terminal and the black plastic casing is the negative battery terminal, red and black are a pair.
- 【Easy to Install】: Each connector comes with a corresponding M8 nut and washer for a secure and quick installation. Easy to remove, easy to clean and take care of, no damage to the original car. Note: Please make sure to connect the correct terminals to the correct polarity.
- 【Rugged and Durable】: The battery terminal connector is made of excellent Iron-plated copper, which conducts electricity efficiently and reduces voltage distortion and transmission loss. Rugged and durable, with excellent resistance to rust, oxidation and corrosion. The protective shell is made of hard plastic, tightly waterproof and resistant to wear and tear.
- 【Thoughtful Design】: This product is meticulously made with smooth edges and will not scratch your palm. The small size is easy to store and can be put into a car storage bag or door storage compartment for storage and organisation. Stylish and well chosen materials, the silver white clean galvanised surface can effectively enhance the car decoration.
MEETOOT 10pcs 300mm Braided Ground Strap Automotive Engine Copper Ground Strap Wire with Terminals Plugs
*$313.00
2024 Upgrade 946-05098C Throttle Choke Cable Compatible with Cub Cadet XT1 GT50 GT54 LT46 LT50 ST54 XT2 LT54 GX54 LX42 LX46 Craftsman MTD Replacement for 946-05098B 946-05098A
*$385.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
Battery Terminal Connector, Top Post Battery Cable Terminal Clamp Set, Positive and Negative 1 Pair with 2 Washers, Car Accessories for SUV Van Motorcycle…
*$202.30
Informação adicional
| Manufacturer | Piburth-auto |
|---|---|
| Brand | Piburth |
| Model | Terminal Clamp |
| Item Weight | 2.89 ounces |
| Product Dimensions | 0.7 x 0.3 x 0.1 inches |
| Country of Origin | China |
| Item model number | Terminal Clamp |
| Exterior | Polished |
| Manufacturer Part Number | Piburth-Emblem |
| Position | Bottom |
| Date First Available | October 26, 2024 |
David K –
These Piburth battery terminal connector set is a must if you are working on a car and need to have something to connect to standard sized battery posts. I’ve had some older cars actually have the battery terminals corrode, and by using these, I was able to refresh them and make them new. You get not only the pair of terminals, but also some washers as well. They would work well for any car, truck, or RV. They are high quality and I think a great value for the money. They are super easy to use as well. I’d recommend them!
S. Johnson –
This product seemed very thing and wimpy. Im not sure if its just the metal but it was very easy to bend or get crushed. The open holes don’t seem wide enough to fit on car battery, but the description says SUV, Van. I tried these on a small volt car battery and they did not fit on the terminals.
While trying to get them to fit the plastic cover thing popped off on both of them. I didn’t feel comfortable trying to force them on my battery since they were not the right size.
Jamie –
These are exactly what I was needing to use a small car battery to replace a motorcycle battery for my generator. Great fit. Perfect solution!
Bill B. –
The design has a lot of extra pieces on it like the plastic and it also has less contact with the battery post which should not be a problem, electrically it has more than the needed capability to handle the battery current. I give it 4 stars because it needs cable lugs to attach to them and they are not included.
IronBeard –
My battery connectors were eaten up and falling apart. They originally were of this design, and lasted almost 20 years, so I got these as a replacement. These are well made, fit tightly, and include the anti-corrosion washers to put underneath. They were easy to replace after cutting off the old ring terminal and replacing it with a new one that I crimped on the cable. You may need additional parts, such as a crimper and ring terminal if your cables were permanently crimped to the original battery clamp.
S. Johnson –
I like this style of terminal. They work with my cables and work more reliably than the ones that simply clamp the end of the cable under a plate. These fit my battery posts perfectly. I’m not sure why some folks are having trouble fitting these to their battery posts. Please note that automobile battery terminals are NOT the same size. The positive terminal has a larger diameter than the negative terminal. These must be used on the appropriate post or they won’t fit right.
Jamie –
Pretty standard battery terminal replacement. Comes with felt pads to fight corrosion. Should fit most car batteries.
Michael Rule –
This set isn’t made from solid metal as many are, and the terminal opening is a bit small for a car. It worked fine for me in a golf cart. Nice price for this light duty terminal set.