- Please pay attention to the operating circumstances. Keep the wiring harness away from any moist or heat, such as rain, moisture environment, electro-heat equipment (engine and etc.).
- Light bar wire harness up to 180 watt load capacity, it is universal fit for any 7″ 10″ 12″ 20″ 30″ 40″ light bars that is within 180w.
- LED Wiring harness kit with 2 lights output connection,it can hook with 2 small watt led light bar and any else off road led lights.
- DC12V 40A rated automotive relay can be assembled with a DC 24V relay (not Supplied). Blade fuse holder with replaceable 30A Fuse up to 2M of wiring, terminal ends on most wires.
- Apply to off-road driving light,fog light, work light etc.This wiring harness is a basic accessory for off-road vehicles, working vehicles, automobiles and boat that use a 12V DC power source.


Frete Grátis em todo o BrasilProduto Original Importado dos EUA
Auxbeam Led Light Bar Wiring Harness with 12V 40Amp Fuse Relay ON/Off Switch (2 Lead 2 Meter Universal)
*$397.00
Informação adicional
Brand | Auxbeam |
---|---|
Material | Polyvinyl Chloride (PVC) |
Item dimensions L x W x H | 8.27 x 1.57 x 3.94 inches |
Cable Type | Auxiliary |
Connector Type | Spade Connector, Ring Terminal |
Manufacturer | Auxbeam |
Item Weight | 10.2 ounces |
Product Dimensions | 8.27 x 1.57 x 3.94 inches |
Item model number | 13 |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | 77707707-01 |
Position | Left |
Bulb Type | LED |
Mirror Lighting Type | automotive-exterior-side-clearance-marker-light-bulbs |
Voltage | 12 Volts |
Date First Available | April 15, 2016 |
Resz –
High quality, easy install, works and looks great. Long enough for a over the cab or front install. Now that said, not long enough for a rear install, and are none longer (length) from Auxbeam. That is disappointing, the response from Auxbeam was, “just had additional wire”, well that’s not why I buy a wiring harness. At any rate that is what I am about to do for the rear light install.
kkreider13 –
The Auxbeam Led Light Bar Wiring Harness Kit was used with Auxbeam® 2Pcs 4″ 18W CREE LED Work Light Bar Flood Beam 60 degree Waterproof for Off-road Truck Car ATV SUV Jeep Boat 4WD ATV Auxiliary Driving Lamp to install on a lawn mower. I bought this kit because the mower did not come with any lights. It was pretty simple to install. One end to the positive and negative terminals of the battery and the switch end I was able to wire to the key on the mower so the light only comes on when the key of the mover is on. Now I’m able to mow at night with no problems.
kkreider13 –
This item is not the length advertised and for that reason did not comply with my reason for purchase. The first descriptive bullet reads: “4 Way Y-Splitter harness featured length of 17.7″ long wiring harness with 9″ of wire flat connector.” I concluded that this item is 26.7″ long, or 17.7″ at a minimum, but including everything it is 15″ long and does not reach the length needed. On the positive side, while this item is labeled made in China, it does appear to be of good quality. Thus the 3 stars. If you really need it to be 18″ long as I did and as advertised, then you should probably look elsewhere. Since I don’t intend to keep this item, I will be returning it without having tested whether it actually works and thus cannot report on the true quality of this harness.
F. Orth –
This Auxbeam Led Light Bar Wiring Harness work good on my 2010 mini cooper for fog light i didn’t have. I only had was the day running light so i replace the Left & Right Front Fog Lights housing and use this wiring harness .
RTB –
Wire looks a bit thin but seems to do the jobðŸ‘
Amazon Customer –
Product is generally good. I like the switch as I was able to mount it easily on my steering column where it’s out of the way. The adhesive is strong, though I heated it up just to be safe.
The ground wire for the relay is comically short but workable.
Here’s the important part: DO NOT wire the power wire directly to the battery. The switch has an led light built into it that will stay on all the time and drain your battery… probably would take weeks, but it’s not a great way to wire something regardless. I used an add-a-fuse to run the power wire to a switched source in the under hood fuse block.
J Miller –
Works great. You can use a cooler switch if you want, but the click switch works fine. Wish the leads were a bit longer for application other than just two identical small LED units on each side of the bumper. It’s perfect for that. Lol. But I installed a 20 in bar at the bumper and a 52 in on the roof, and the leads weren’t quite long enough for that. I simply added wire and made it work. By the way, the stock wiring is thick gauge…i dont expect it to fail anytime soon. The harness is solid and works great, and is at an awesome price point.
robert –
Bought for wiring relays to my 67 Mustang Gt Fog lights. High quality relays, wires and a remote toggle switch for inside the car. I can run the fans in auto using the temp sensor OR plug in my in car toggle switch in the sensor so I can Manually control their use!!! Auxbeam makes some really good stuff!!!! Five stars for all catagories. Extremely happy and recommend to everyone. Thanks
Joshua –
used this to hook up me and my buddies offroading lights on our trucks. this is an awesome wiring setup and is THE WAY TO GO!!! makes instullation SO easy, and comes with basically everything you need for most projects (minus a couple extra feet of wiring, depending on your vehicle). hooked up 2 lights on my truck and a single light bar on my freinds truck. both work great. comes with an awesome switch that is nice and small and SUPER EASY to attach wherever you want it. FOR THE PRICE THIS IS HANDS DOWN THE BEST SETUP ANYWHERE!!!