- Feature: One Direction Operation (Up AND Down)
- Feature: Compatible With Any Window System
- Feature: Works Off Factory Window Switches
- Feature: Load Sensor
- Feature: Auto Stop


Frete Grátis em todo o BrasilProduto Original Importado dos EUA
AutoLoc Power Accessories 9862 One Touch Up And Down Window Unit
*$900.30
Informação adicional
Operation Mode | Auto |
---|---|
Operating Voltage | 12 Volts |
Contact Type | Normally Open |
Connector Type | Plug In |
Brand | AutoLöc |
Terminal | Screw |
Item dimensions L x W x H | 4.2 x 6.2 x 2.6 inches |
Actuator Type | Electric Motor |
Contact Material | Brass |
International Protection Rating | IP00 |
Number of Positions | 2 |
Control Method | Remote |
Connectivity Protocol | Wi-Fi |
Unit Count | 1 Count |
Number of Items | 1 |
Global Trade Identification Number | 00802269137967 |
Manufacturer | AutoLoc |
Controller Type | Push Button |
UPC | 802269137967 |
Item Weight | 5.6 ounces |
Product Dimensions | 4.2 x 6.2 x 2.6 inches |
Country of Origin | China |
Item model number | 9862 |
Manufacturer Part Number | AUTWC1000 |
OEM Part Number | AUTWC1000 |
Voltage | 12 Volts |
Date First Available | February 25, 2014 |
HULK –
Easy to install with the supplied instructions and works beautifully.
Jessie Cahill –
Wired as instructed, very simple in my older vehicle. Works perfectly with the vehicle off. However, once it’s running, it does NOT work at all. You can hear the relay click, but nothing. Pretty sure I can hear it click and unclick rapidly suggesting that it’s shutting off almost instantly. I can only assume that the increased voltage while running (~14v) creates an increased load to trigger it to immediately stop as it does once it senses a load. All connections were tested while running and found to be correct and functional. Was SO excited after initial install. Now, very disappointed to have to turn off the vehicle to use the window. Maybe mine’s faulty, since no one else reports the same issue.
Jaromexxxx –
Product does what it says. Will make any regular power window into a fully automatic window.
Only thing to keep in mind is that it only affects whichever switch where it is installed. So for example, I installed it on the driver’s master console to automate my front right window. The auto feature only works from my driver’s master console, does not work from the front right window switch. If I would’ve installed it in the front right door, the auto feature would not work from my driver’s master console. So just make sure you install it at the location where you want to auto feature to be enabled.
Sean Benet –
Happy to report it worked great
Mr P M Ward –
Worked fine for a couple of months, then stopped. Not before it started doing weird things. It would work only sometimes or then work a minute after pressing the button. Also the self stop would not work in one direction. After checking all the wiring and the plug it was found to be the control unit, moving it about would cause all those faults.
Shame there is not another make out there because this one is very poor quality and not fit for purpose.
fredy usuga –
Gran producto
Mike Pope –
Probably the best mod that I have done to my Tundra. At the touch of a button now I can roll down the window without having to watch it to see where it is and if I need to stop it early I just reverse the switch. So far it seems to work very well and I highly advise anyone to do this mod. Easy install came shipped complete wrapped well and in perfect condition.
Van –
I gave this device 4 stars because the instructions could be written in a manner that’s easier to understand.
I have an older vehicle that has electric windows, but doesn’t have the auto-down / up capability, which is a nice feature. I followed the step-by-step kit instructions to the letter, but it wouldn’t work. I examined the schematic diagram and found that the black ground wire MUST be connected to a ground point in order to complete the circuit. No mention of this step in the instructions. After making this connection, the unit works fine. I must note that I sent an email to their customer service asking for help, but got no response 24 hours after sending it. This kit does work, and is flexible enough to accommodate activation by remote control if you have such a system. But you do need more than a basic understanding of electricity to be able to install it. I used butt splices and crimp-connectors, along with thick tape at potential pinch or vibration points. Also Check the operation of the window for proper clearance and operation before you button everything up. My first-time install for both the window regulator and the kit took 4 hours, with much of that time spent watching how-to videos on replacing the window regulator. I’m a tinkerer, and have an advanced knowledge of both mechanical and electrical circuits. I can also read a schematic.
Amazon Customer –
Didn’t work when installed in my ‘08 4Runner.