- Inner diameter: 4mm (0.16″), Outer diameter: 10mm (0.39″), Overall Length: 22mm (0.86″), Inner length: 19mm (0.74″),
- Working Temp: -40 to 220 Degree C, Pressure Rating: 145 PSI
- Finest Silicone Polymer ensures quality finishing. Dress up standard pipework. Best for Boost , Breather, Coolant and Pressure Vacuum Hosing
- 10pcs per pack


Frete Grátis em todo o BrasilProduto Original Importado dos EUA
Autobahn88 Silicone Hose Cap Intake Vacuum Hose End Plug, Inner Diameter 4mm (0.16″), Pack of 10 (Black)
*$321.30
Informação adicional
Brand | Autobahn88 |
---|---|
Material | Silicone |
Color | Silicone Black |
Product Dimensions | 0.86"L x 0.39"W |
Maximum Pressure | 145 Pound per Square Inch |
Nominal Wall Thickness | 0.065 inches |
Outside Diameter | 1E+1 Millimeters |
Item Length | 0.86 Inches |
Manufacturer | Autobahn88 |
Specific Uses For Product | BOV pipes, Intake pipes, Oil breather tank, Oil catch can plug, Radiator reservoir tank plug, Radiator blanking plug, Intercooler Pipes, Boost controller plug, Industrial applications |
Item Weight | 0.81 ounces |
Country of Origin | Hong Kong |
Is Discontinued By Manufacturer | No |
Exterior | Black |
Manufacturer Part Number | ASHU10-4-BK |
Position | Inner |
Date First Available | June 30, 2017 |
steve f wilbour –
Good parts, I am restoring antique Kawasaki motorcycle
Thomas E –
Bought these to fit on Cobra Replica heater outlet on the water pump. Works better than rubber and the price was right. Plenty of backup now as well.
testarossatd –
Un peu cher malheureusement mais très utile à mettre sous le capot pour condamner des trou de tuyaux.
Tyler Hartman –
Bought this to cap off the bypass hose at the inlet pipe itself on my Subaru!
Fit like a glove on my APS 3” hard pipe
Heather –
I used 2 of them for thread protectors and 4 more are on the carb transition pieces. I should buy more.
Hoguer Aleksander –
These are awesome. They are nice and thick and seem very high quality silicon. They are a little long, but that’s not really a bad thing since you can easily cut them to the correct length.
I have nothing bad to say about these other than they are a tad expensive but they seem like they won’t crack with the heat like normal rubber caps.
Hard to Impress –
I searched everywhere to find replacements for the little feet for the three legs of the rack in my microwave. Every model wanted me to buy a whole new rack for about $50. So, I started to look for something silicone that would withstand the heat and work on the three little feet as “stockings”. Now I have more than I need for the low price charged. I hope people find them because the manufacturers of the microwave machines are ripping people off. I feel pretty danged smart to have discovered this option for my microwave rack feet covers. They work perfectly.
Michel –
Per me ok, utilizzato uno dei 10 presenti nella confezione, posizionato come tappo per radiatore, dove, quella uscita del nuovo radiatore non era presente nella tipologia del mio modello, sbagliato dal venditore, mi sono accorto dopo troppo tempo e quindi non ho potuto fare il reso, questo tappino in silicone per ora mi ha salvato.
Buon materiale, speriamo duri nel tempo, al massimo ne ho altri 9 pezzi da utilizzare.
Robert –
I bought a replacement aluminum radiator, however it had an unused nipple that I had to cap. I have tried the parts store rubber caps before and they always cracked shortly after installation. I put this silicone cap on the radiator nipple with a hose clamp. It has gone over 100 miles so far with no signs of bulging or cracking. I will update my review if there is a failure. Now I have 9 spares.
testarossatd –
Just needed something to blank off the lines temporarily while they’re open. Easy on but tight, easy off! Solid construction!