Frete Grátis em todos os produtos
- Product Detail : Extended length 23″, compressed length 13.55″, stroke length 9.45″, one-piece bracket on both ends of gas strut, 1 * Installation Instruction, easy to install as soon as you receive it
- Multiple Application : 80 lbs of support is often used on RV bed, camper bed, boat hatch, basement door, trap door, etc. as long as the cover weighs 64-88 lbs, it holds up perfectly
- Lift Heavy Easily : Are you tired of struggling to lift heavy lids or doors? Maybe it’s time to think about ARANA Gas Struts, just one finger away from effortlessly lifting 80 lbs
- Easy of Installation : 23″ 80 lbs struts come with simple brackets that can be used in most projects. Package includes nuts and instructions, so just a screwdriver and you’ll be done in 20 minutes
- ARANA Brand Support : ARANA is your loyal friend. If you run into any issues like damage or tricky installation after purchase, don’t hesitate to reach out. Making sure gas strut works great is our top priority
2PCS Front Complete Struts Assembly w/Coil Spring Fit for 2008-2016 for Chrysler Town & Country 2008-2019 for Dodge Grand Caravan Shock Absorber Assembly Replaces OE 171128R...
*$1,645.00
Suspension Shock Absorber Strut Fit for Toyota Sequoia 2001-2007, Front and Rear With Coil Spring Assembly Replace for 171348L 171348R 37240
*$1,907.60
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
ARANA Gas Struts 23 inch 80Lb Gas Springs Shocks with Mounting Brackets, 23″ Lift Support for Heavy Duty Lid RV Bed Camper Bed Trap Door Bench Lid (Fit 64-88lbs Lid), 2Pcs
*$565.00
Informação adicional
| Operating force | 80 Pounds |
|---|---|
| Manufacturer | ARANA |
| Compressed Length | 13.6 Inches |
| Item Weight | 2.03 pounds |
| Package Dimensions | 17.13 x 3.46 x 1.81 inches |
| Country of Origin | Hong Kong |
| Item model number | ARANA-23inch-80Lb |
| Manufacturer Part Number | ara-1065 |
| Date First Available | May 23, 2024 |
![KEYOOG 2Pcs Set K640286 K620048 Right Left Rear Upper Control Arm Assembly For 92-01 Ho-nda CR-V [92-00 Civic del So] 97-00 Ac-ura EL [94-01 Integra] Passenger & Driver Side...](https://m.media-amazon.com/images/I/51Q60j7NkKL._AC_SL1100_.jpg)
Thomas –
I thought this was 100 lbs per pair, but it’s apparently 100 lbs PER STRUT or 200 lbs per pair. I weigh 250 and I cannot compress a single strut by putting one end against the floor and using the mounting bracket on a square of plywood and bearing my entire weight down upon on it. It acts as a solid rod. Not sure what the issue is. I tried to use it to support a fold up camper bed that weighs 80-100 lbs. I wanted it to have enough force to stay up when folded up. Instead it has enough force to rip the hinges off the bottom if you’re foolish enough to attempt to fight these struts to lower it. Im outside my return window so I suppose I’ll try and buy some weaker struts, but be aware that although the description says to measure what you’re lifting and buy this pair for items from 100-110 lbs, you are looking at 100 lbs plus per strut to get them to compress (I bowed a 2×4 it was bolted to before these gave any indication of giving even slightly).
Dale –
My first impression great powerful shocks that come compressed for easy install. Very impressive for the price. Have not used them long but lift a 300lb door I have with ease!
Andrew desjardin –
Buenas noches, no puedo hacer que baje mi amortiguador, no baja 😔, y no tiene instru, podría ayudarme a darme indicaciones de como puedo utilizarlos
Professional Consumer #1 –
Of all things to be impressed by…. These little guys are exactly what I set out to get when I dreamt up a design for under-bed- storage. I have a very dense/heavy “full” sized mattress that is being supported and lifted from the side by 23″ 150lb struts at the moment. Sturdy. Quality. Easy on the wallet.
My calculations were just a tiny bit off though because after adding my bedding and anything else that makes it atop my bed it doesn’t fully lift the weight. After 5 months of using an arm or my back to painfully help support it I swallowed my pride and messaged ARANA. My expectations were low seeing as it had been 5 months or more! But I remembered that like half of the reviews mentioned the awesome customer service so I gave it a shot. To my surprise VIgor was very helpful and after attempting to troubleshoot the common mishaps he decided it would be no issue to just send me a 200lb pair to replace the 150’s. Seriously this company frickin rocks. The product is solid, the service is above and beyond, and the price is so reasonable that I just have a hard time believing it. New struts on the way and I will buy from ARANA again – I feel like I owe them that much. ♥️
it is very fuuuuuuuuun –
These worked perfect on my verticle heavy door shed.
William Transou –
The brackets for these don’t hold up at all. My first attempt to close my RV lid for my large custom made storage bin caused the brackets to bend which did not allow the lid to close. No-go for sure.
Professional Consumer #1 –
I used these to add assist to opening of a heavy lid that covers a well tank. It was difficult for the homeowner to open, as it took about 80 pounds of force to lift. So I purchased the 100 pound, 23 inch set, not sure exactly how strong they needed to be. I emailed the supplier a sketch and asked what location to mount these. I mounted in location they suggested, and after adjusting location slightly a couple of times, they work great. After raising lit about 12″ (with much lower force than before) they essentially raise the lid the rest of the way. Exactly what I needed.
The mounting brackets are very versatile and allow many mounting options.
My only issue is that the mounting brackets seem too light duty, as you can see by the picture. I removed and straightened the brackets, then mounted them on the inside of bracket so the force was more even (Pic showing full open lid shows final layout). Seem to be OK, but not sure how long they will hold up. However, this lid is only opened maybe once a month, so I believe it will be OK.
Alma Teresa Balderas –
I couldn’t use them. Way more that 100 lbs. I am well over 200 lbs. with all my weight I can not compress either of them against the floor.
James D. Eckert –
The 23-inch, 200 lb gas prop struts I recently purchased have exceeded my expectations in terms of quality and performance. From the moment I installed them, I could tell they were exceptionally well made. The materials used feel robust and durable, giving me confidence in their longevity and ability to handle the specified weight capacity.
The craftsmanship of these gas prop struts is remarkable. The attention to detail in the construction is evident, with smooth edges and precise engineering. The gas mechanism operates smoothly, providing a reliable and consistent lifting force, making it effortless to open and close heavy lids and doors. The struts also maintain their strength over time, ensuring a consistent performance even with frequent use.
Furthermore, the ease of installation was a pleasant surprise. Clear instructions and the included mounting hardware made the setup straightforward, allowing me to have them in place quickly without any hassle.
These gas prop struts have not only made operating heavy items a breeze but have also added a sense of sophistication to my projects. Their top-notch construction and reliable performance make them a standout choice for anyone seeking high-quality gas prop struts. I highly recommend these to anyone in need of a reliable lifting solution for heavy applications.
Garbil Huler –
Great price and product.
Worked perfectly