Frete Grátis em todos os produtos
Descrição do Produto: Adam’s Iron Remover (16oz) – Iron Out Fallout
O Adam’s Iron Remover é a solução definitiva para a remoção de depósitos de ferro e contaminações que podem prejudicar a pintura do seu veículo. Este produto inovador foi desenvolvido para proteger e remover os resíduos nocivos que se acumulam na superfície do carro, garantindo que a pintura permaneça em perfeito estado. O ferro, quando se liga à superfície do veículo, pode causar danos irreparáveis à delicada camada de acabamento. Ao contrário de uma barra de argila, que apenas remove depósitos superficiais, o Adam’s Iron Remover atua profundamente, eliminando não apenas os resíduos visíveis, mas também as contaminações abaixo da superfície.
Com uma fórmula à base de pH neutro, o Adam’s Iron Remover é seguro para todos os tipos de pintura, incluindo acabamentos em verniz e pintura de uma etapa. Sua coloração laranja rica e seu aroma cítrico fresco tornam a aplicação mais agradável, permitindo que você passe mais tempo cuidando do seu carro e menos tempo preocupado com odores desagradáveis. A nova fórmula ativa rapidamente ao entrar em contato com a superfície, garantindo uma limpeza eficaz sem manchar os acabamentos plásticos ou metálicos.
Ao aplicar o Adam’s Iron Remover, você verá a mágica acontecer: a pintura do seu veículo “sangrará” em um tom roxo, sinalizando a remoção dos depósitos de ferro prejudiciais. É importante ressaltar que, embora o produto seja seguro para superfícies pintadas, deve-se evitar o contato com acabamentos plásticos e metálicos para garantir a integridade de todas as partes do veículo.
- Instruções de Uso:
1. Comece lavando o veículo com água para remover sujeira solta.
2. Agite bem a embalagem do Adam’s Iron Remover antes de usar.
3. Aplique o produto em uma área pequena da superfície pintada, mantendo uma distância de cerca de 15 a 20 cm.
4. Espalhe o produto uniformemente com um borrifador, cobrindo toda a área afetada.
5. Aguarde alguns minutos para que o produto atue e observe a mudança de cor.
6. Enxágue bem com água limpa para remover todos os resíduos do produto.
7. Repita o processo em outras áreas conforme necessário.
Características do Produto:
– Volume: 16 oz (aproximadamente 473 ml)
– Fórmula: pH neutro, livre de ácidos
– Cor: Laranja rica
– Aroma: Cítrico fresco
– Compatibilidade: Seguro para todas as superfícies pintadas, incluindo rodas
– Ativação: Rápida ao contato, sem manchar acabamentos plásticos ou metálicos
– Eficácia: Remove depósitos de ferro e contaminações abaixo da superfície
Perguntas Frequentes (FAQ):
Pergunta: O Adam’s Iron Remover é seguro para todos os tipos de pintura?
Resposta: Sim, a fórmula pH neutra do Adam’s Iron Remover é segura para todos os tipos de pintura, incluindo acabamentos em verniz e pintura de uma etapa.
Pergunta: Como posso evitar manchas em partes plásticas e metálicas ao usar o produto?
Resposta: Para evitar manchas, aplique o Adam’s Iron Remover apenas em superfícies pintadas e evite o contato com acabamentos plásticos e metálicos.
Pergunta: O que significa quando a pintura “sangra” roxo?
Resposta: A mudança de cor para roxo indica que o produto está removendo depósitos de ferro e contaminações da superfície da pintura.
Pergunta: Posso usar o Adam’s Iron Remover em rodas?
Resposta: Sim, o Adam’s Iron Remover é seguro para uso em rodas e outras superfícies pintadas.
Pergunta: Qual é a frequência recomendada para usar o Adam’s Iron Remover?
Resposta: A frequência de uso pode variar, mas recomenda-se aplicar o produto sempre que notar contaminações visíveis ou a cada detalhamento completo do veículo.
Jay –
I’m amazed at how effective Adam’s Iron Remover is at protecting my car’s finish. The new formulation (released June 2019) is a significant improvement over similar products I’ve tried. What sets this product apart is its ability to remove iron particles from your paint without any mechanical scrubbing – just spray and watch the magic happen!
The science behind it is fascinating – when you apply it, the solution turns purple as it reacts with iron contamination, giving you a visual indicator that it’s working. It’s incredibly satisfying to actually see the harmful fallout being removed from your paint. Unlike clay bars that only handle surface contaminants, this product gets deep into the paint to remove embedded iron particles.
One of the biggest improvements in this new formula is the reduced smell. If you’ve used other iron removers, you know they can be pretty overwhelming, but Adam’s has managed to make this much more pleasant to work with. It’s also pH neutral and acid-free, so you can feel confident using it on your clear coat or single-stage paint. Just remember to avoid getting it on trim and metallic surfaces.
For best results, simply rinse your car first, then spray this on any painted surface (works great on wheels too!). The orange-colored formula makes it easy to see where you’ve applied it, and it activates quickly on contact. The fact that it’s made in the USA and comes with a 110% satisfaction guarantee just adds to my confidence in the product.
This has become an essential part of my detailing routine. For anyone serious about protecting their vehicle’s finish from iron contamination, this product is absolutely worth the investment.
Abdurhman –
Its good product but,
Dry very fast which damages the pain.
Barely covers one car I didn’t even use it on the wheels .
If you can avoid this two i think it will be great for you
snake –
Removed nearly all rusts from my motorcycle’s suspension, which was built up years ago.
Kareem –
Very safe to use and not too harsh. Helped expose iron spots that need touch up. A bit easy to go through whole bottle so will have to order more
Chuck(PGCF) –
This is my go-to Iron remover. The products from and name of Adam’s Polishes are proven. I have tried a few other brands and so far, nothing has surpassed Adams. Just put the product in a sprayer, spray it one, let it dwell, and rinse it off. I use it on all of the external surfaces of the vehicles. It is fun watch it turn the iron contamination the satisfying reddish-purple color as it removes the iron from the surfaces. Just be sure to not allow the product to dry on the vehicle. If you have not used this before there is a smell with this and most iron removers but nothing to be concerned about. This stuff is priced low enough and easy enough to be used by anyone at home and good enough to be used by the pros.
Hong Zheng –
be warned, this product will stain concrete. Part of my driveway is not pink.
NullRock –
Adam’s Iron Remover is absolutely fantastic! I used it on my car’s wheels and paint, and it effortlessly removed iron deposits and rust fallout that had been building up for months. Watching the purple reaction as it works is so satisfying, and the results were crystal clear after rinsing.
The spray bottle is easy to use, and the 16oz size is generous enough for multiple applications. It’s safe for my car’s paint, and there was no harsh scrubbing needed. My car looks cleaner than ever, and the wheels especially shine like new.
Highly recommended for anyone looking to step up their detailing game! This product delivers exactly as promised.
Deanna Coleman –
The top of our red/purple 2008 GMC had a little rust spot developing on the top of the cab in the middle. My husband applied this product to stop the rust from spreading and so far it has and thankful we found it. We will reapply monthly. We do not have the money to have a paint job for now so until then we will use this product.
Person420 –
Follow the directions! Vehicle body should be cold, do not do this in the sun. Rinse it off before it dries. It works great and smells terrible. Even got most of the rust off my grandpas old lineman’s pliers
K L –
I have a white full-size 4-door long-bed truck that was riddled with orange rust spots. This has happened to every white vehicle I have had. Used this Iron remover and it works. I believe it is a pretty mild formulation since it can take several applications to get the spots off. But I would rather apply several times than have the paint start reacting negatively. I went through one full bottle on one vehicle and just ordered a couple more since there are still signs of spots. Have not found a better alternative. I also just switched out my brake pads for ceramic ones to hopefully not have any metal reaction.