Frete Grátis em todos os produtos
### Descrição do Produto
Apresentamos o Bico de Mangueira de Incêndio 90051 Heavy Duty, uma ferramenta essencial para quem busca eficiência e durabilidade em suas atividades de jardinagem, limpeza ou combate a incêndios. Este bico de mangueira é projetado para produzir um jato de água potente que pode alcançar até 40 pés, permitindo que você atinja áreas distantes com facilidade. Com um controle de água on/off separado, você pode ajustar o padrão de spray exatamente onde deseja, sem a necessidade de desligar a mangueira, proporcionando praticidade e economia de água.
O bico é ajustável, permitindo que você altere o fluxo de jato para um spray de enxágue, adaptando-se perfeitamente às suas necessidades. A construção em metal, envolta em uma camada de borracha, garante não apenas facilidade de uso, mas também uma durabilidade excepcional, resistindo ao desgaste do tempo e ao uso intenso. Disponível em cores variadas, como preto/amarelo ou cinza/teal, este bico combina funcionalidade com um design moderno.
### Instruções de Uso:
Para utilizar o Bico de Mangueira de Incêndio 90051, siga os passos abaixo:
1. Conecte o bico à mangueira de jardim, certificando-se de que está bem fixo.
2. Abra a torneira lentamente para permitir que a água flua pela mangueira.
3. Utilize o controle on/off para ativar ou desativar o fluxo de água conforme necessário.
4. Ajuste o bico para o padrão desejado, girando a parte superior do bico para alternar entre jato e enxágue.
5. Após o uso, feche a torneira e desconecte o bico da mangueira, limpando-o para garantir sua durabilidade.
### Características do Produto
– Alcance do Jato: Produz um jato de água que pode alcançar até 40 pés, ideal para cobrir grandes áreas.
– Controle On/Off: Permite que você mantenha o padrão de spray sem precisar desligar a água.
– Ajustabilidade: Transição fácil entre jato e enxágue, adaptando-se a diferentes tarefas.
– Construção Durável: Bico de metal revestido em borracha, proporcionando resistência e conforto ao manuseio.
– Variedade de Cores: Disponível em combinações de cores como preto/amarelo ou cinza/teal, para atender ao seu gosto pessoal.
### Perguntas Frequentes (FAQ)
Pergunta: O bico é compatível com todas as mangueiras de jardim?
Resposta: Sim, o Bico de Mangueira de Incêndio 90051 é projetado para se adaptar à maioria das mangueiras de jardim padrão.
Pergunta: Posso usar este bico para lavar meu carro?
Resposta: Sim, a função de enxágue é ideal para lavar carros, proporcionando um fluxo de água suave e eficiente.
Pergunta: O material do bico é resistente a quedas?
Resposta: Sim, a construção em metal com revestimento de borracha oferece proteção contra impactos e quedas, aumentando sua durabilidade.
Pergunta: As cores do bico variam?
Resposta: Sim, o produto está disponível em diferentes combinações de cores, como preto/amarelo e cinza/teal.
Pergunta: Como posso limpar o bico após o uso?
Resposta: Após o uso, basta enxaguar o bico com água limpa e secá-lo antes de armazená-lo para garantir sua longevidade.
Vilma M. –
Good
R. Painter –
Not the greatest in the world but serviceable. Nice long jet of water, item would be better off with stronger water pressure. Nice rubber casing, switch is not very difficult to turn on and off. When changing to different streams of water none of the others(exempting the strong jet of water) are very good. the spray is more of a guzzle type flow rather than a fine mist…good for cleaning the undeside of my truck I guess.
B. Raney –
I already own the identical nozzle, but without the shut off valve, and I love that nozzle. I works great. The only thing I could even remotely say is wrong with the old one is the lack of such an “instant off” feature, minor though that really is. I thought this would be the answer to the problem… yes and no. Yes, it shuts off the water immediately. Now for the not-so-much part.
The valve they put in this nozzle to provide the instant off feature is such a reduction in the size of the stream that you lose a lot of force to the water due to a reduction in the amount of water being used. Most water hoses are 5/8″ diameter these days and the orifice in this valve is closer to 3/8″-1/2″ (doing that from sight, I did not actually measure it, sorry). Any spray nozzle works by using the available water pressure to push a volume of water over a restricted, set area. When you restrict the area further by closing off the nozzle and you get a different shaped and harder water stream. If you take that same nozzle and water pressure, and reduce the volume of available water with a smaller opening, and then force it through the same size of a restricted opening, you will reduce the force of that water, which can be counterproductive to why you are using a nozzle in the first place.
Also, from the first time I used the nozzle, I found that the top half of the shut off switch operator itself comes off very easily. That’s the little yellow part you use to physically operate the valve and shut off the water flow. This comes apart to allow access to the screw which holds the “operator” onto the top of the valve stem. While you can still operate the valve if this is off, you end up doing so with only half the thickness to the operator switch, and that has an abrupt, somewhat sharp plastic edge. Fortunately, I have not lost the top half (yet) and will try gluing it in place since I don’t expect to ever have to service this valve. Hopefully, the screw won’t back out and need tightening over time. With my luck, it will, and I will have glued the thing closed. Oh well, this is a disposable item. One I would not purchase again.
MarcL –
High quality construction. No leaks or drips. Shutoff handle works really well. Handles the high pressure coming from the well on my farm.
Mark L –
Great so far. I’ve had it for a few months and it’s been great.
I love the ability to shut off the water flow with both the turn of the nozzle or the bail. That way I can keep a setting and shut the water off if I want to. It easily adjusts from full off/close to a super fine mist to a jet at the twist of the wrist.
The rubber is nice and durable, while keeping paint protected if you use it to wash the car, and get it too close to the paint than planned.
The only concern I have is that the bail might eventually snap if it gets brittle, but so far it’s been perfect.
Time will tell, but right now, I really like this nozzle and you likely will too.
Hector –
Good price, and does not leak
C. J. Clark –
I got this nozzle after getting sick of having so many crappy plastic sprayers that are cheap and snap or crack so easily.
I bought this back in November and it is still working well. Very impressive.
If you want an extremely fine misting sprayer for delicate plants, you might want a different nozzle. It does have a slow adjustment but, this is a “Fire Hose” kind of nozzle after all. The spray pattern can go from more of a firm steady stream to a spray that looks like a gentle pond fountain.
The on/off switch is a tad small, but at least once it is in the off position, you probably don’t have to worry about it accidently spraying the car that you just dried!
Also, I found that if you just twist it all the way it will cut the flow off too.
I like this a lot more than other sprayer/nozzles that I have bought and used and had to throw away before.
The Reading Lady –
This nozzle worked great the first few times even though the spray range at the lower range are not useful. Then the sprayer would not turn down to off even then the yellow leaver was in the off position. There are slim gaps on the sprayer metal and the rubber casing. Water starts spewing out from those gaps. I paid full price and will be requesting a refund.