Frete Grátis em todos os produtos
- 【Designed for LiFePO4 Battery】: This 14.4V 10A lifepo4 battery charger is uniquely designed for 12V LiFePO4 batteries, it enables more than 87% high charging efficiency for lithium iron phosphate battery charging. It maximizes optimizes the lithium battery performance, and extends the battery lifetime without overcharging.
- 【10 Amp LiFePO4 Battery Charger】: The LiFePO4 battery charger supports fast charging of various batteries and helps you to save your charging time. It will automatically turn to a trickle charger when the battery is nearly charged full, protecting your battery from damage.
- 【Multiple Protection & Safe & Reliable】: Build-in short circuit protection, overload protection, over-current protection, over-voltage protection, over-temperature protection, reverse connection protection. It can protect the battery from damage while charging, ensuring safe charging at anytime and anywhere, and you don’t need to worry!
- 【Fully Automatic Charging】: The 12V lithium battery charger is easy to use, just plug and charge. No need for any complex operation, connecting the smart battery charger step by step, it will automatically charge your 12V batteries. The microprocessor-controlled program will monitor the charging status and the indicator will light green when the battery is fully charged.
- 【Compatibility & Widely Use】: It’s the all-in-one universal charging solution – battery charger, battery maintainer, trickle charger, float charger. This 12v battery maintainer not only can be applied to lithium iron phosphate batteries, but also can be applied to all types of 12v lithium batteries, including 12v lead-acid, flooded, AGM, gel cell and deep cycle batteries. It’s the best smart charger for automotive, motorcycle, marine, RV, powersport, lawn & garden, children’s toys, etc.
- 【Charge Dead Battery】: This 12-volt battery charger has an open circuit voltage, which can activate the battery that is over-discharging and drops down to 1 volt. The auto-repair function can wake up the sleep battery, bringing it back to life and extending battery lifespan.
- 【Lightweight and Portable, Easy to Operate】: The 12 volt battery charger only weights 450g/1lbs, it will automatically turn to trickle charging when it is fully charged, and you do not need to wait during the charging process. It is easy to carry and store. You will get a battery charger, M8 Terminals, battery clamps and user manual.
Ziciner 2 Pairs Battery Post Shims, Lead Alloy Car Battery Post Adapter for Positive or Negative Post, Automotive Battery Post Shims Anode Cathode Sleeves for Car Truck Boat
*$212.70
Keadic 60 Packs M6x10/12/16/18/20mm 304 Stainless Steel Battery Bolts and Nuts Assortment Set, ATV Battery Bolt Motorcycle Battery Terminal Screws with Square Nuts for...
*$262.10
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
12V LiFePO4 Battery Charger, PowerUrus 12V 10A Automatic Trickle Battery Chargers, 12V Lithium Battery Charger, 12v Battery Maintainer for LiFePO4 Batteries, Lithium Batteries,…
*$637.00
Informação adicional
| Product Dimensions | 5.98 x 2.95 x 1.4 inches |
|---|---|
| Item Weight | 1.63 pounds |
| Item model number | C146 |
| Date First Available | March 25, 2024 |
| Manufacturer | PowerUrus |
| Country of Origin | China |
Colin –
First impressions on this charger are that it’s a fantastic value for what you get – especially compared to some of the other budget “LiFePo4” battery chargers I’ve tried in the past. Some are made of incredibly cheap, non-durable materials or falsely advertise lithium battery charging support when they’re actually designed for Lead-Acid/AGM batteries (13.8v), others only output the rated amperage for a few minutes before throttling back. This one works as described!
The charger and accessories comes in a neat, well-fitted box, nestled in a foam insert and without extra plastic. The charger itself feels nice in the palm of your hand as the case is made of durable plastic and has a nice weight to it – indicative of quality internal components (though I haven’t taken it apart to confirm). It comes with a set of alligator clips and ring terminals, both terminated with SAE connectors to plug into the charger output.
Charging performance is exactly as advertised and without any annoying electrical coil whine! My DC clamp multimeter read 10.10 amps going into the battery at the positive wire and the BMS of my 100ah 12v LiFePo4 battery (at 13.34v) reported it charging at 9.37 amps.
The manual is easy to read and understand and product support contact information is provided, if necessary.
Some critiques I have about this unit are that, while being fanless, the charging unit gets quite warm, so make sure it’s in a well-ventilated area indoors to dissipate heat – I temped it at ~120F on the top of the case and ~130F on the bottom after 4 hours of charging. I would like to see the case contain some aluminum heatsink elements to keep it cooler as a fanless charger – this would ensure internal component longevity.
Another thing to note is the SAE connectors do not have locking clips to hold them together so there’s a risk that they could jostle/come loose if strained. The output line is also not protected by a fuse; installing your own in-line fuse solves this if that’s a concern for your setup.
These reasons are why I rated this product a 4/5, but all in all it’s a solid 10 amp lithium charger and you can’t go wrong with it for the price. Note: I got this as a Prime Day deal for ~25% off.
Customer Review –
Small, quiet, SMART and powerful. It does the job better than all my other chargers.
Colin –
Would not charge my batteries. I tried this charger on several discharged batteries and it went immediately to 14.4 voltage with no amperage on all batteries. My Victron is much more expensive but it always works. You get what you pay for…
Customer Review –
The charger works well, but sometimes I don’t think it cuts off at the right time. I connected a fully charged battery to it and it remained on for over 12 hours. But beyond that it works well.
MT –
This charger charges to 14.4 v my test shows that it does! This charger gets very warm. When charging my new 50 ah Power Queen battery
I put the charger on a glass dinner plate
When charging to protect my kitchen table top.
This charger does charge my battery ok.
I did a capacity test on my new battery and got 51ah. This charger charged it back up in 5 hours.
I am happy with its performance.
Hawkeye –
Bought this little guy to use on my new12 volt, 100a LiFeP04 battery in the RV. You just connect it, plug it in, and walk away. The battery was fully charged in about 11 hours, and the charger automatically shuts off. Very happy with this product.
carl r cornils –
Well built but only charges my new 12v 100Ah battery to 13.8v
Bummer.
Cynthia T –
Works well with LiFePO4 batteries and pretty much reaches the specified 10A output. Tested on both large and small LiFePO4 batteries.
No frills, just a red or green LED to indicate the charge state.
I would not use this on anything other than a LiFePO4 battery. The listing suggests compatibility with “SLA battery, Car battery, Lead-acid battery and so on” but the 14.4 maximum voltage is too high for sustained use on those types.