Frete Grátis em todos os produtos
- Universal battery capacity indicator voltage meter – wide voltage input range DC 12V-84V Lead-acid Batteries and 3S-26S Lithium Batteries: Ternary lithium batteries, polymer batteries, lithium-ion batteries, storage batteries.
- Multifunctional Battery Capacity voltage meter Indicator – Battery tester Right Switch key can switch voltmeter, battery percentage, switch off. Left setting key have several functions: Cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- High Quality of battery voltage meter – Large LCD screen display with green backlit and low power consumption.Two display modes can be available: battery symbol and battery percentage, battery symbol and voltmeter.
- Safety to Use – The battery voltage meter Built-in 30cm power cable, simple to connect. Reverse protection design, won’t burn if connect reversely.
- Portable and Waterproof voltage meter- Small size, light weight, equipped with a PVC film, the surface is waterproof.
Remote Battery Disconnect Switch 12V 24V 250A with Led Voltage Display, Ultra-Low Standby Current, Anti Theft and Battery Drain, Battery Kill Switch for Car, RV, ATV, Truck,...
*$636.90
E-FAST 25A Battery Charger, 12/24V All in One Lifepo4 Lead Acid Car Battery Charger, Automotive Jump Starter, Upgraded Trickle Charger, Battery Maintainer for Car Truck...
*$973.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
12V 24V 36V 48V Battery Capacity Indicator Golf Cart Voltage Meter with LCD Display Green Backlight, Waterproof Monitor Gauge Digital Voltmeter Testers for 3S-26S Lithium…
*$253.20
Informação adicional
| Brand | DFCROMI |
|---|---|
| Power Source | Battery Powered |
| Style | Voltage Tester |
| Color | Green |
| Item Weight | 18 Grams |
J –
Meter works good – Instructions are like reading Japanese- Sleep mode don’t work had to put a switch in to shut it off when I’m not using cart. after several wiring changes- and going direct to battery with both wires- it isn’t accurate- thank God the lithium battery has a Bluetooth connection to my cell phone- There is about a 25% difference between the 2- I trust the Bluetooth
Daniel Osuna –
The media could not be loaded.
Install this battey meter on my 2015 Club cart, easy to install took the dash off, made a hole with a cutter putt it in, conected black to ground, and posite to ignition cable. It reads perfectly at night with its on light.
Really recomended.
skeetshtr –
This is a decent , compact battery monitor that will work in a lot of different set ups. Decent quality and you can set it for different types and more than one battery. I bought one for each Lithium battery in my fishing skiff. Easy to flush mount to the top of a battery box or on top of a battery.
Amazon Customer –
The display is small but is about the size of a normal battery life indicator on a golf cart. It seemed to be accurate a few time I tested it against my voltage meter. It’s easy to see, it seems to be made correctly, and I think it could be used to monitor any battery system.
LESLIE V. –
closely read the entire description. very confusing to install. very small. I would not purchase again and likely will not return as it was only a few dollars. not as described. English as a second language seems to get in the way of accuracy.
jones –
I use this to double check my two 50ah LifePO4 batteries. Voltage readout works fine but percent charged never moves. I just use the voltage readout anyway.
guyt –
Works fine once you figure out how to configure it. To enter the configuration mode, the display needs to be disconnected from the power source and re-power it with the left button pressed. Company suggests to use the connector as an on/off power supply, but once installed, it could be an issue if there is no easy way to de-power the display. So, you may want to configure it before installation, using a 9V battery as a power source.
When in configuration mode, you select the battery type, that basically determine the voltage of a single cell when fully charged: P (lead acid 12V), L (Lithium 3.7V) and F (LIPO 3.2V). The right button allows you to set the number of cells your battery system, for example:
P01 = Lead 12V * 1 = 12V
L07= Lithium 3.7V * 4 = 14.8V
F07 = LIPO 3.2V * 4 = 12.8V
Configuration will be saved when the display is de-powered.
The basic design flaw with this display is that it doesn’t have a real on/off button, so the best is to connect the display to the battery via an on/off switch so you can configure it when installed. Also, it prevents the device to draw power when not necessary.
Darrel Steinhour –
Works as it should. Takes a bit of effort to get it programmed. The instructions are translated from Chinese? so you have to interpret a little. The bars in the “battery” indicate which functions are active.
Lane –
Love it, great to get a better picture of what my battery level is at. I connected to a ground under the dash and the positive coming off the key. I have it set to light up for 10 seconds when I turn the key on then turns off unless I push the button. Reading isn’t as accurate as if I went direct to the battery but super easy to install and is good enough for what I need.