Frete Grátis em todos os produtos
- ✅ID: 1/2 inch (13mm); OD: 3/4 inch (19mm); Length:3M / 10 FT.
- ✅Maximum Working Pressure: 300 psi; Bursting Pressure: 1200psi
- ✅Operating Temperature:-40ºF to +257 ºF / -40ºC to 125 ºC
- ✅WIDE APPLICATION – The 1/2 fuel hose is designed to handle a wide range of fuels, including ethanol, diesel, biodiesel, E10, E15, E85, and gasohol, making it suitable for various applications.
- ✅DURABLE CONSTRUCTION – Made of NBR and braided polyester fiber, the 1/2 transmission hose is oil and wear resistant, ensuring long-lasting performance in fuel system, fuel injection, and diesel applications.
- ✅SAE 30R7 STANDARD – The 1/2 coolant hose meets and exceeds the SAE 30R7 specifications, providing reliable performance for fuel pump, fuel filter installations, and more.
Wix 33804 Fuel Water Separator
*$515.00
ECCPP Fuel Tank Filler Neck Pipe Hose Compatible For Dodge Dakota 2000 2001 2002 2003 2004 2 Door Only Replace OE 52102481AA 52127876
*$720.60
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
1/2 Transmission Cooler Hose with Clamps SAE 30R7 Standard 10FT 300PSI Working Pressure – Perfect for Coolant, Engine Oil, and Fuel Line Application
*$433.00
Informação adicional
| Brand | Byredio |
|---|---|
| Color | 10FT with Clamps |
| Nominal Wall Thickness | 0.125 inches |
| Outside Diameter | 0.75 Inches |
| Item Length | 1E+1 Feet |
| Manufacturer | Byredio |
| Specific Uses For Product | Automotive applications |
| Part Number | sku38 13mm with clamp |
| Item Weight | 12.8 ounces |
| Size | 1/2 Inch |
| Batteries Included | No |
| Batteries Required | No |
| Date First Available | November 30, 2024 |
GrumpyOldMan –
This product does NOT work as transmission cooler flex hose! I installed two 7″ sections of this hose to connect the transmission to the heat exchanger in the radiator in my Scion xB with the simple U340 transmission. Very light duty. The hoses began leaking — oozing trans fluid — within two weeks, and both sections were very stiff when they were removed. I replaced those two sections with hydraulic return hose, and my problems were solved.
This hose might work as fuel line, but it does NOT work as advertised — transmission cooler hose.
Bobo the Dude –
Strong trans cooler hose that holds up in harsh environments.
bigdogone1 –
I think this is fuel line…and would get soft under heat and…no matter how well it was clamped…would pull off the fitting.
It may be good hose for some applications…but on my mail Jeep made for some freakishly tense moments laying under the jeep trying to get it fixed out on the route.
I wouldn’t buy it again.
Maybe it will work for you?
I don’t know.
I bought some better hose and didn’t have the same problem.
chuck w. –
Very nice
MB –
Value,great fit,easy to install, necessary replacement in dry climates
Dan Obrien –
I used this for some custom hosing for my car, works well no leaks
Scott –
Do not use as oil or transmission cooler line, oils destroy regular fuel hose over time. I bought without looking into material description.
Matthew W, Furch –
I used this line for an oil cooler application June of 2024, it’s now January 2025 and the hose burst. It’s hard and brittle and the entire inner liner has a crack the entire length of the hose. I almost lost my engine thanks to this awful hose. I also have to replace my front brakes now too as it’s sprayed all over the lf rotor and now the pads are impregnated with oil effectively rendering my expensive aftermarket aggressive street/track pads worthless. DO YOURSELF A FAVOR AND DO NOT BUY !
Joey –
It’s good