Frete Grátis em todos os produtos
### Carregador de Bateria 3 AMP 6V/12V – O Companheiro Ideal para Seu Veículo
O Carregador de Bateria 3 AMP 6V/12V é a solução definitiva para quem busca eficiência e praticidade no carregamento de baterias de veículos. Com a capacidade de identificar automaticamente a voltagem, este carregador se adapta a diferentes tipos de baterias, incluindo as de chumbo-ácido (AGM, Gel, SLA, Flooded, VRLA, EFB, MF, WET) e as de lítio (LiFePo4). Seja para carros, motos, cortadores de grama ou veículos agrícolas, este carregador é a escolha perfeita para manter suas baterias sempre em dia.
#### Características do Produto
– Carregador de Bateria 6V/12V: O carregador de 3A é capaz de identificar automaticamente a voltagem e ajustar a corrente de carga, garantindo um carregamento seguro e eficiente.
– Manutenção de Carga: Após carregar completamente a bateria, o carregador muda para o modo flutuação, mantendo os níveis de voltagem adequados sem sobrecarregar ou danificar a bateria.
– Carregador Inteligente: Multifuncional, pode ser utilizado como carregador, mantenedor, carregador de gotejamento (apenas para baterias de chumbo-ácido) e carregador de reparo por pulso.
– Segurança em Primeiro Lugar: Com proteção contra sobrecarga, sobrecorrente, superaquecimento, polaridade reversa e curto-circuito, este carregador é projetado para garantir a segurança durante o uso.
– Ativação e Reparo de Baterias: O modo “REPAIR” permite tentar ativar baterias que estiverem inativas por muito tempo, embora não possa recuperar baterias completamente danificadas.
– Carregamento Automático: Com um design robusto em ABS resistente ao fogo e à corrosão, o carregador ajusta automaticamente a corrente de carga conforme a temperatura ambiente.
– Carregamento de Gotejamento: Após a carga completa, o carregador corta automaticamente a energia, reiniciando em modo de gotejamento após uma queda de energia.
#### Instruções de Uso:
1. Conexão: Conecte o carregador à bateria utilizando os terminais de anel ou os cabos tipo jacaré fornecidos.
2. Seleção de Modo: Escolha o modo apropriado para o tipo de bateria que você está carregando (carregamento normal, manutenção ou reparo).
3. Ligação: Conecte o carregador à tomada elétrica. O carregador irá identificar automaticamente a voltagem da bateria.
4. Monitoramento: Acompanhe o processo de carregamento através dos indicadores LED, que informam sobre o status da carga.
5. Desconexão: Após o carregamento completo, desconecte o carregador da bateria e da tomada.
#### Características do Produto
– Entrada AC: 100-240V 50/60Hz
– Tensão da Bateria: 6V/12V
– Corrente de Saída: Máx. 3A
– Potência de Saída: Máx. 60W
– Proteções: Sobrecarregamento, sobrecorrente, superaquecimento, polaridade reversa, curto-circuito, contato sem faísca.
### Perguntas Frequentes (FAQ)
Pergunta: O carregador pode ser usado em baterias de lítio?
Resposta: Sim, o carregador é compatível com baterias de lítio e LiFePo4, além de baterias de chumbo-ácido.
Pergunta: O que fazer se a bateria não carregar?
Resposta: Verifique as conexões e certifique-se de que a bateria não está completamente danificada. Tente usar o modo “REPAIR” se a bateria estiver inativa por muito tempo.
Pergunta: O carregador pode ser deixado conectado por longos períodos?
Resposta: Sim, o carregador muda automaticamente para o modo flutuação após a carga completa, mantendo a bateria em níveis ideais sem sobrecarregá-la.
Pergunta: Qual é a duração máxima do modo de reparo?
Resposta: O modo de reparo pode ser utilizado por até 24 horas, mas não garante que a bateria será restaurada a 100% de sua capacidade original.
Pergunta: O carregador é seguro para uso em ambientes externos?
Resposta: O carregador possui um design resistente e é seguro para uso em ambientes externos, desde que protegido da chuva e umidade excessiva.
Nora Ochoa –
This charged up the battery pretty quickly. It was really easy to use. It’s a nice size small enough to store in a convenient place.
Yorniloc –
I recently purchased this 3 Amp battery charger, and I couldn’t be happier with its performance! It charges my batteries quickly and efficiently without any overheating issues. The compact design makes it easy to store, and the clear indicator lights let me know exactly when my battery is fully charged.
What I love most is how versatile it is—it works perfectly with my car, motorcycle, and marine batteries. The automatic shut-off feature gives me peace of mind, preventing overcharging and extending battery life.
If you’re looking for a dependable, fast-charging, and user-friendly battery charger, this one is a fantastic choice. Highly recommend!
Nathan –
Got for my truck because it sits for weeks at a time while gone at work. This keeps the battery fully charged and ready for when I get home! Super easy to use and works great.
Jie Li –
This is a 12v/6v smart charger. It charges up to three amps. It works for Lead-Acid ,lithium and lifepo4 too. Just connect to red positive (+) on battery and then black negative (-) on battery then put charger into wall socket. It’ll turn on and start charging unless something went wrong or you think you have to change Mode then hit MODE button until you like where it’s set. I just plugged it in and it started charging. I charged a Lead-Acid battery. The battery was charge from 12.03V t0 12.5V. It was blinking percentage the whole time it was charging and when it finished it was just solid lit up. So it won’t overcharge your battery. Nice to have a small charger that can work on almost anything as long as the Ah isn’t too high. Anyways comes with the quick connects so you could leave it connected to your battery and just plug it up when needed. Good deal and it works well.
Anonymous –
Works great, keeps my bike battery well charged when stored
Justin Matley –
Upon first use, I tried this charger on multiple batteries and all it would do is beep loudly. The manual doesn’t explain the beeping sound. I was at a loss, but I had a suspicion the red and black wires were reversed. That turned out to be the case. So this thing does not connect the standard way. Basically, the SAE connector is reversed. I’ve experienced this in the past with very cheap chargers. Lucky for me I had an adapter that would flip the connection around. Then I was able to use the charger. For anyone else, you’ll have to either only use the clamps and test which way it’ll work. You may have to put the red clamp on your typically black or negative side of your battery. Or when using the SAE connector, purchase an adapter. Search for something like SAE reverse adapter. Or cut the connector off and wire up your own connector the correct way. But if you’re purchasing any adapter or other connector, you’re probably not saving money anymore. There are other chargers that are just a few dollars more. With my adapter the charger appears to be working, so that’s good. Reading through the reviews, I’m not the only person that experience this exact same problem.
Twinsen –
I had a trickle charger that I had to loan to my mechanic (my mechanic doesn’t have one…bad sign, lol) while he’s working on one of my cars. But I was needing to charge another car that hadn’t been started in 2 months, so I found this one and it worked perfectly. Very easy to use, even shows an indicator of how the battery state is between 25%-50%-75-100%. It also has a repair battery function which I’m not sure how this works, but will give it a try if I ever get a battery that needs “repaired” I guess, lol.
james mandelbaum –
When I connected it to my scooter it just beeped and flashed. I than tried it on my motorcycle and the same thing. I was thinking it must be defective and thats when I noticed the cables are reversed polarity. I connected a polarity reversal adapter on it and it worked perfectly. It shows exactly where the current charge is at and beeps once its full. I used it on both my AGM scooter battery and my LiIon Motorcycle battery and both fully charged with no issues. This is now the winter keeper to keep the bikes full charged while sitting in the garage.
RPL –
I’m really happy with this charger, which I use to keep the battery charged in my Toyota Corolla. I only drive the car every few weeks, so the battery had kept running down – now I can keep it fully charged thanks to the trickle charge feature of this item. I especially like the 3 amp capacity (many other such chargers are only rated at 800 millliamps or 1 amp) and the display is bright and easy to read. It also features a display that reveals the degree of charging being undergone by the battery so I can monitor the charged condition of the battery. The unit also has a setting to “repair” a battery but the very brief included printed instructions fail to explain when to use this or how it accomplishes such a “repair”. The instructions need to be expanded!
Bernice R –
Used this to replace a gate charger. Works great. Have been using this charger for the past 3 weeks now. No issues