Frete Grátis em todo o BrasilProduto Original Importado dos EUA

Remote Battery Disconnect Switch Remote Kill Switch for Car 12V 200A Wireless Car Kill Switch Anti Theft, Automatic Cut/Shut Off Switch,for Auto, RV, ATV,Truck, Boat.(PVC)

*$433.00

(64 avaliações de clientes)
Add to Cart
Remote Battery Disconnect Switch Remote Kill Switch for Car 12V 200A Wireless Car Kill Switch Anti Theft, Automatic Cut/Shut Off Switch,for Auto, RV, ATV,Truck, Boat.(PVC)
Remote Battery Disconnect Switch Remote Kill Switch for Car 12V 200A Wireless Car Kill Switch Anti Theft, Automatic Cut/Shut Off Switch,for Auto, RV, ATV,Truck, Boat.(PVC)
*$433.00
SKU: B9C3970E Categoria: Marca:
  • 【Reliable Performance】: This car wireless battery disconnect switch, rated at 200A, DC 12V, low standby current (≤5mA), remote control distance up to 164 feet (50 meters).
  • 【Benefits of Battery Kill Switch】: Eliminate unnecessary power consumption when the battery is idle. It can prolong the service life of car battery. Avoid battery damage and vehicle theft due to long-term parking. The remote battery switch main unit is small in size and easy to install.
  • 【Easy to Use】: With this remote car battery toggle switch, you don’t need to open the hood to start or shut off the power every time. Just press the remote button to disconnect or start the car battery power system. (Note: Do not turn off the battery power switch while the engine is working. This remote battery switch is only for turning the battery power on/off, not for starting the engine).
  • 【Tip】: If the battery is left for too long, it will naturally discharge and eventually cause the battery to run out of power. Therefore, when the battery is left for a long period of time (more than two months), it is necessary to charge the battery regularly to ensure that the battery will not be depleted by natural discharge. The remote control will not work when the battery is depleted.
  • 【Widely Used】: This can be used for battery remote control switch adopts high quality pure copper material, better contact, more safe and reliable, widely used in vehicles that need to control the battery such as cars, trucks, boats, RVs. As well as remote control of heavy equipment, inverters, water pumps, industrial and agricultural equipment that require less than 200A of current.
  • 【Product Includes】: 1 x Battery Isolator Controller (plastic case), 2 x Remote Control, 2 x Battery Post Metal Clips, 1 x Manual.

Informação adicional

Operation Mode

automatic

Current Rating

2E+2 Amps

Operating Voltage

12 Volts

Contact Type

Normally Open

Connector Type

Crimp

Brand

WOODGUILIN

Terminal

Spade

Circuit Type

1-way

Mounting Type

Panel Mount

Actuator Type

Push Button

Switch Type Push Button

Switch Type Push Button

64 avaliações para Remote Battery Disconnect Switch Remote Kill Switch for Car 12V 200A Wireless Car Kill Switch Anti Theft, Automatic Cut/Shut Off Switch,for Auto, RV, ATV,Truck, Boat.(PVC)

  1. pmoy

    This remote battery disconnect switch came with confusing instructions. Luckily, the wiring was intuitive and fairly straightforward. Just connect the small red and black wires to battery positive and negative respectively. Then connect one of the large black wires to the battery negative and the other to the load. Note that this switch has a latching relay. When power to the coil is removed (e.g., by disconnecting the small black or red wire), the switch retains its state. Some remote battery disconnect switches have a built-in safety lockout. When the battery voltage is above a certain value (e.g., when being charged by a car’s alternator), the push-button remote is disabled. This is a useful safety feature when the switch is used in a car. It prevents accidental power disconnect to the engine when the car’s running. I am using this remote switch as an emergency shutoff for a bow-mount trolling motor on my boat, so this feature is unnecessary. If you’re planning to use this in a car, be careful.

  2. Miguel Serrano

    When it worked it worked perfectly but it burned out within 3 weeks. I used id to cut power to the starter so it really didn’t put too much strain to it but it still died. Now it won’t click on update.. I actually blew a fuse because of the electric fans. After diagnosing I found it was still working. Changing to 5 stars

  3. RJD

    I spent hours trying to install. The main issue is the lack of instructions and wiring diagrams in order to assess and overcome questions and issues. I’m about average in electrical knowledge and ability, but I couldn’t make heads or tales on how to wire in an additional switch or circuit in order to overide the possibility of accidentally switching off the computer while the vehicle is running. Also, it’s not like a garage where someone is on the same channel and I come home to an open garage. I’m in motion all over town. Is this a rolling code that can’t be duplicated? Or is it just a standard channel that operates innumerable all over? If the relay has 100 meter range, basically anything or anyone actuating within 100 meters of me while I’m driving can switch my truck off.

    I would only recommend this only for someone who has a good understanding of modern vehicle wiring or someone who is willing to accept the risk of possibly being faced with a shutdown vehicle in motion.

    The reason I’m so reluctant to install this is because I’ve had a shutdown in this truck caused by a failing ignition contact. Losing brakes and steering was a sobering moment that I will never forget. This kit needs to come with above average instructions and diagrams to deal with these concerns.

    Picture of the instructions enclosed with the kit. Not much to work with

  4. i_silence_u

    Remove the key ignition switch on my boat to just a push button start. Needed A way to protect the boat. If I pull to a restaurant on the water this was a great Add on and does the job perfect.

  5. Wibel

    I like the ease of installation very simple

  6. John J Reagan

    Disconnecting battery might cause problems for fuel trim and other computer related settings. I placed the solenoid ( a real old school mechanical contact) between the fuse marked “START” in the fuse box. In the off state it draws no power. In the on state it draws about 1/4 amp. No problem when the car is running. I just need to make sure if stored for long periods to turn off the relay.

    Works perfectly and highly recommended. Solid state relays do not work in my application because of a 0.7 voltage drop in the closed position that makes it look open to the computer.

  7. RJD

    Had to return due to the installation guide being very vague and so limited to instruction. And i saw it won’t work with my Trevor start on my 11 crown Victoria cvpi

  8. Great item

    Kill switch works awesome always wanted one of these

Adicionar uma avaliação

O seu endereço de e-mail não será publicado. Campos obrigatórios são marcados com *