Frete Grátis em todos os produtos
Descrição do Produto: AutoEC Novo Interruptor Toggle Rocker 3pc para Carro e Caminhão com Luz Verde On-Off 12V
O AutoEC Novo Interruptor Toggle Rocker é a solução ideal para quem busca um controle eficiente e estiloso para os sistemas elétricos de veículos, sejam eles carros ou caminhões. Com um design robusto e funcional, este interruptor SPST (Single Pole Single Throw) oferece um controle ON-OFF confiável, permitindo que você ative ou desative dispositivos elétricos com facilidade. Com uma classificação de 12V e 20A, este interruptor é perfeito para uma variedade de aplicações automotivas, garantindo que sua instalação elétrica funcione de maneira segura e eficiente.
A iluminação do interruptor é projetada no estilo DOT, proporcionando uma luz verde vibrante que não apenas indica o status do dispositivo, mas também adiciona um toque moderno ao interior do seu veículo. O design de 2 polos do SPST permite uma conexão simples e direta, enquanto o terceiro polo deve ser conectado à terra, garantindo uma operação estável e sem falhas.
Os materiais utilizados na construção do AutoEC Novo Interruptor Toggle Rocker são de alta qualidade, com quadros em nylon que oferecem durabilidade e resistência ao desgaste. Os terminais são feitos de latão banhado a prata, o que não só melhora a condução elétrica, mas também aumenta a resistência à corrosão, prolongando a vida útil do produto.
- Instruções de Uso:
Para utilizar o AutoEC Novo Interruptor Toggle Rocker, comece desconectando a bateria do veículo para garantir segurança durante a instalação. Em seguida, identifique os fios que você deseja controlar e conecte-os aos terminais do interruptor, respeitando a polaridade correta. O terminal central deve ser conectado à fonte de energia de 12V, enquanto os outros dois terminais devem ser ligados aos dispositivos que você deseja controlar. O terceiro polo deve ser conectado à terra. Após a instalação, reconecte a bateria e teste o interruptor para garantir que tudo esteja funcionando corretamente.
Características do Produto:
– Tipo de Interruptor: SPST (ON-OFF)
– Classificação: 12V / DC, 20A
– Iluminação: Luz verde estilo DOT de 12V
– Design: 2 polos com um terceiro polo para conexão à terra
– Material: Quadros em nylon e terminais em latão banhado a prata
– Aplicações: Ideal para carros, caminhões e outros veículos
– Durabilidade: Resistência ao desgaste e à corrosão
Perguntas Frequentes (FAQ):
Pergunta: O interruptor é adequado para uso em ambientes externos?
Resposta: Sim, o AutoEC Novo Interruptor Toggle Rocker é projetado para resistir a condições adversas, tornando-o adequado para uso em ambientes externos.
Pergunta: Qual é a corrente máxima que o interruptor pode suportar?
Resposta: O interruptor suporta uma corrente máxima de 20A, ideal para a maioria das aplicações automotivas.
Pergunta: É fácil de instalar?
Resposta: Sim, a instalação é simples e pode ser realizada com ferramentas básicas, seguindo as instruções fornecidas.
Pergunta: A luz verde permanece acesa mesmo quando o interruptor está desligado?
Resposta: Não, a luz verde acende apenas quando o interruptor está na posição ON.
Pergunta: O que devo fazer se o interruptor não funcionar corretamente?
Resposta: Verifique as conexões e a polaridade dos fios. Se o problema persistir, entre em contato com o suporte ao cliente para assistência.
Amazon Customer –
Works great thanks.
Shantzonpoint –
The switch(s) operate as described in conjunction with a 12 v digital display voltmeter we installed in our T@B travel trailer. The switches were packaged in a small shoe box size cardboard box with plenty of large bubble wrap packaging such that no damage occurred in shipping. The volt meter, ordered at the same time but shipped separately, was in a flat envelope lined with thin bubble wrap. The three prong electrical connectors easily punctured the lining and the envelope and were bent over 90 degrees during shipping. Gratefully, Amazon credited our account as we/they were not sure the prongs could be straightened without damage. Fortunately the prongs did not break as they were straightened and the installation was completed without any other issues. The meter and switch operate properly and look great.
C –
I’ve bought and used switches just like this in the past. These are a bit different in that the “On” position is the opposite side of where the LED is. With all my previous versions, I’d push the side of the switch the LED is on to send power to whatever it was controlling. These are the opposite. They work just fine, just seems odd to have the LED on the bottom instead of the top when it’s in the on position. The pictures in the description are accurate so it’s not false advertising. I just didn’t notice it.
With all that said, these are nice switches. Not ridiculously bright but you can easily see them.
Life Is For Enjoying –
Delivered a day early. Definitely use again
Jon&Rach –
I bought these a couple years ago and they worked out reasonably well for all my projects. Note: I always put a 560 ohm resistor on the ground terminal, since I don’t believe they actually have resistors hardwired.
When I ran out from the first bag, I bought them again. However, the new batch was different than the first one. My first batch was all built with the LED on the ‘on’ side of the switch, which made sense because the LED is on when the switch is on. The new batch was built in a way that feels upside-down to me: The LED is on the ‘off’ side, but still turns on when the switch is on (see photo).
I’m not sure if this was a conscious design change or a per-batch sort of thing, but I’m not a fan of the batch that I just got and probably won’t use them for anything important. I definitely won’t use them along side my old switches, because it would just be confusing.
C –
Useful single pole single throw switch that lets you know when it’s on. Like the round hole design for simplified instillation that looks nice. Will most likely use for 12 volt applications.
Deanna E. –
indicator light does work as described. turns on when ON position and does turn off when on OFF position. for those that assume that there isn’t a resistor for led yes it has one. since some of these switches do work for higher voltages you might want to check desciption first so that you don’t burn out led. also at higher voltages led might be a bit brighter so you might need to add a resistor on the negative side so that light isn’t too bright on the dash.
Deanna E. –
They do what they were made to do; turn electronics on and off. I use these in my truck for my front off-road lights and the lights up on my truck topper. Small and convenient, easy to install and the LED lights aren’t overpowering in the cab at night.
The picture shows the initial switch installed for my off-road lights. The 2nd switch now sits right next to this one. They don’t take up much room and they’re not very deep so a lot of room isn’t needed behind them for the wiring.
Nick N. –
I only needed one swift but for the price you get three !
installed onto daughters ride on and hooked up to some cheap car DRL’s (spliced into the 12v battery) and as i didn’t want it to be always on just because the battery was connected, this suited the bill perfectly to let my girls have real working lights for their car that they can turn off and on.
Drilled the hole right because the ‘gear shift’ on the dash and it looks every bit like the car was built with it. Extra nice touch is the little blue led that glows when powered on.
Can’t wait to find something to use the other two on 😉
ps. for a quick reference,
Earth (negative from power source) is the golden prong
Power in (positive from power source) is middle prong
Power out/on (for whatever you’re switching) is the furtherest away from gold prong
Keith Snipes –
work as they should