Frete Grátis em todos os produtos
### Descrição do Produto
O AutoEC New 3pc Car Truck Rocker Toggle Switch Yellow Light On-Off Control 12V é a solução ideal para quem busca um controle eficiente e estiloso para os sistemas elétricos de veículos. Este interruptor rocker SPST (Single Pole Single Throw) é projetado para operar em um sistema ON-OFF, permitindo um controle simples e direto. Com uma classificação de 12V DC e 20A, ele é robusto o suficiente para suportar as demandas elétricas de caminhões e carros, garantindo um desempenho confiável em diversas condições.
A iluminação do interruptor é projetada no estilo DOT, proporcionando uma luz amarela que não apenas indica o status do interruptor, mas também adiciona um toque estético ao interior do seu veículo. O design de 2 polos do SPST permite uma instalação fácil, com um terceiro polo que deve ser conectado à terra, assegurando uma operação segura e eficiente.
Os materiais utilizados na construção do AutoEC são de alta qualidade, com quadros em nylon que oferecem durabilidade e resistência ao desgaste, enquanto os terminais em latão prateado garantem uma excelente condução elétrica e resistência à corrosão. Este interruptor é ideal para quem deseja não apenas funcionalidade, mas também um componente que complemente o visual do seu veículo.
### Instruções de Uso:
Para utilizar o AutoEC New 3pc Car Truck Rocker Toggle Switch, siga os passos abaixo:
1. Instalação: Conecte os terminais do interruptor aos fios do sistema elétrico do seu veículo. O terminal central deve ser conectado à fonte de energia, enquanto os outros dois terminais devem ser conectados ao dispositivo que você deseja controlar.
2. Conexão à Terra: Certifique-se de conectar o terceiro polo à terra para garantir a segurança e a eficiência do funcionamento do interruptor.
3. Operação: Para ligar o dispositivo, pressione o interruptor para a posição ON. A luz amarela acenderá, indicando que o dispositivo está ativo. Para desligar, pressione novamente para a posição OFF.
### Características do Produto
– Tipo de Interruptor: SPST (ON-OFF)
– Classificação: 12V DC, 20A
– Iluminação: Luz amarela estilo DOT, 12V
– Design: 2 polos com um terceiro polo para conexão à terra
– Material: Quadros em nylon e terminais em latão prateado
– Aplicações: Ideal para carros, caminhões e outros veículos que necessitam de controle elétrico eficiente
### Perguntas Frequentes (FAQ)
Pergunta: O interruptor é resistente à água?
Resposta: O AutoEC New 3pc Car Truck Rocker Toggle Switch não é classificado como à prova d’água, portanto, recomenda-se evitar a exposição direta à água para garantir sua durabilidade.
Pergunta: Posso usar este interruptor em um sistema de 24V?
Resposta: Este interruptor é projetado para operar em 12V DC. Usá-lo em um sistema de 24V pode danificá-lo e anular a garantia.
Pergunta: Qual é a vida útil esperada deste interruptor?
Resposta: Com uso adequado e instalação correta, o interruptor pode durar vários anos, dependendo das condições de operação e manutenção.
Pergunta: É fácil de instalar?
Resposta: Sim, a instalação é simples e pode ser realizada com ferramentas básicas. Siga as instruções de uso para garantir uma instalação correta.
Pergunta: O que fazer se a luz não acender?
Resposta: Verifique as conexões elétricas e certifique-se de que o interruptor está corretamente conectado à fonte de energia. Se o problema persistir, pode ser necessário substituir o interruptor.
Deanna E. –
They do what they were made to do; turn electronics on and off. I use these in my truck for my front off-road lights and the lights up on my truck topper. Small and convenient, easy to install and the LED lights aren’t overpowering in the cab at night.
The picture shows the initial switch installed for my off-road lights. The 2nd switch now sits right next to this one. They don’t take up much room and they’re not very deep so a lot of room isn’t needed behind them for the wiring.
C –
I’ve bought and used switches just like this in the past. These are a bit different in that the “On” position is the opposite side of where the LED is. With all my previous versions, I’d push the side of the switch the LED is on to send power to whatever it was controlling. These are the opposite. They work just fine, just seems odd to have the LED on the bottom instead of the top when it’s in the on position. The pictures in the description are accurate so it’s not false advertising. I just didn’t notice it.
With all that said, these are nice switches. Not ridiculously bright but you can easily see them.
Deanna E. –
indicator light does work as described. turns on when ON position and does turn off when on OFF position. for those that assume that there isn’t a resistor for led yes it has one. since some of these switches do work for higher voltages you might want to check desciption first so that you don’t burn out led. also at higher voltages led might be a bit brighter so you might need to add a resistor on the negative side so that light isn’t too bright on the dash.
Jon&Rach –
I bought these a couple years ago and they worked out reasonably well for all my projects. Note: I always put a 560 ohm resistor on the ground terminal, since I don’t believe they actually have resistors hardwired.
When I ran out from the first bag, I bought them again. However, the new batch was different than the first one. My first batch was all built with the LED on the ‘on’ side of the switch, which made sense because the LED is on when the switch is on. The new batch was built in a way that feels upside-down to me: The LED is on the ‘off’ side, but still turns on when the switch is on (see photo).
I’m not sure if this was a conscious design change or a per-batch sort of thing, but I’m not a fan of the batch that I just got and probably won’t use them for anything important. I definitely won’t use them along side my old switches, because it would just be confusing.
C –
Useful single pole single throw switch that lets you know when it’s on. Like the round hole design for simplified instillation that looks nice. Will most likely use for 12 volt applications.
Amazon Customer –
Works great thanks.
Shantzonpoint –
The switch(s) operate as described in conjunction with a 12 v digital display voltmeter we installed in our T@B travel trailer. The switches were packaged in a small shoe box size cardboard box with plenty of large bubble wrap packaging such that no damage occurred in shipping. The volt meter, ordered at the same time but shipped separately, was in a flat envelope lined with thin bubble wrap. The three prong electrical connectors easily punctured the lining and the envelope and were bent over 90 degrees during shipping. Gratefully, Amazon credited our account as we/they were not sure the prongs could be straightened without damage. Fortunately the prongs did not break as they were straightened and the installation was completed without any other issues. The meter and switch operate properly and look great.
Keith Snipes –
work as they should
Life Is For Enjoying –
Delivered a day early. Definitely use again
Nick N. –
I only needed one swift but for the price you get three !
installed onto daughters ride on and hooked up to some cheap car DRL’s (spliced into the 12v battery) and as i didn’t want it to be always on just because the battery was connected, this suited the bill perfectly to let my girls have real working lights for their car that they can turn off and on.
Drilled the hole right because the ‘gear shift’ on the dash and it looks every bit like the car was built with it. Extra nice touch is the little blue led that glows when powered on.
Can’t wait to find something to use the other two on 😉
ps. for a quick reference,
Earth (negative from power source) is the golden prong
Power in (positive from power source) is middle prong
Power out/on (for whatever you’re switching) is the furtherest away from gold prong