Frete Grátis em todos os produtos
### Descrição do Produto
O AutoEC 3pc 12V 20A Car Truck Round Rocker Toggle LED Switch é a escolha perfeita para quem procura um interruptor de alta performance e confiabilidade para sistemas elétricos em veículos, caminhões e equipamentos diversos. Com um design robusto e funcional, este interruptor rocker SPST (Single Pole Single Throw) proporciona um controle ON-OFF intuitivo, permitindo que você ative ou desative dispositivos elétricos de forma rápida e eficiente.
Com uma classificação de 12V / DC e 20A, este interruptor é ideal para uma variedade de aplicações, desde iluminação interna e externa até sistemas de som automotivo. A iluminação LED azul, com um estilo DOT, não só confere um toque moderno ao seu painel, mas também garante visibilidade em condições de baixa luminosidade, facilitando a operação do interruptor em qualquer situação.
O design de 2 polos do SPST permite uma instalação simples e eficiente, enquanto o terceiro polo, destinado à conexão à terra, assegura que a luz de indicação funcione corretamente. Fabricado com materiais de alta qualidade, como quadros em nylon e terminais em latão prateado, este interruptor é resistente à corrosão e projetado para durar.
### Instruções de Uso:
Para utilizar o AutoEC 3pc 12V 20A Car Truck Round Rocker Toggle LED Switch, siga os passos abaixo:
1. Conexão Elétrica: Conecte os terminais do interruptor aos fios do dispositivo que deseja controlar. O terminal central deve ser conectado à fonte de energia, enquanto os outros dois terminais devem ser conectados ao dispositivo e à terra, respectivamente.
2. Verificação: Antes de ligar a fonte de energia, verifique se todas as conexões estão firmes e seguras para evitar curtos-circuitos.
3. Operação: Para ativar o dispositivo, pressione o interruptor para a posição ON. A luz LED azul acenderá, indicando que o dispositivo está em funcionamento. Para desativar, pressione novamente para a posição OFF.
### Características do Produto
– Tipo de Interruptor: SPST (ON-OFF)
– Classificação: 12V / DC, 20A
– Iluminação: LED azul estilo DOT, ideal para uso noturno
– Design: 2 polos com um terceiro polo para conexão à terra
– Material: Estruturas em nylon e terminais em latão prateado, garantindo resistência e durabilidade
– Aplicações: Ideal para automóveis, caminhões, barcos e outros equipamentos elétricos
### Perguntas Frequentes (FAQ)
Pergunta: Este interruptor é adequado para uso em ambientes externos?
Resposta: Sim, o AutoEC 3pc é projetado para ser resistente e pode ser utilizado em ambientes externos, desde que as conexões estejam devidamente protegidas contra umidade.
Pergunta: Qual é a voltagem máxima que este interruptor pode suportar?
Resposta: O interruptor é classificado para operar com uma voltagem de até 12V DC e uma corrente de 20A.
Pergunta: Como posso instalar o interruptor corretamente?
Resposta: A instalação deve ser feita conectando os terminais do interruptor aos fios do dispositivo e à fonte de energia, seguindo as instruções de uso para garantir uma conexão segura.
Pergunta: A luz LED funciona mesmo se o dispositivo estiver desligado?
Resposta: Não, a luz LED acenderá apenas quando o interruptor estiver na posição ON e o dispositivo estiver em funcionamento.
Pergunta: O que devo fazer se a luz LED não acender?
Resposta: Verifique as conexões elétricas, especialmente a conexão à terra, e certifique-se de que a fonte de energia está funcionando corretamente.
Shantzonpoint –
The switch(s) operate as described in conjunction with a 12 v digital display voltmeter we installed in our T@B travel trailer. The switches were packaged in a small shoe box size cardboard box with plenty of large bubble wrap packaging such that no damage occurred in shipping. The volt meter, ordered at the same time but shipped separately, was in a flat envelope lined with thin bubble wrap. The three prong electrical connectors easily punctured the lining and the envelope and were bent over 90 degrees during shipping. Gratefully, Amazon credited our account as we/they were not sure the prongs could be straightened without damage. Fortunately the prongs did not break as they were straightened and the installation was completed without any other issues. The meter and switch operate properly and look great.
C –
I’ve bought and used switches just like this in the past. These are a bit different in that the “On” position is the opposite side of where the LED is. With all my previous versions, I’d push the side of the switch the LED is on to send power to whatever it was controlling. These are the opposite. They work just fine, just seems odd to have the LED on the bottom instead of the top when it’s in the on position. The pictures in the description are accurate so it’s not false advertising. I just didn’t notice it.
With all that said, these are nice switches. Not ridiculously bright but you can easily see them.
Deanna E. –
They do what they were made to do; turn electronics on and off. I use these in my truck for my front off-road lights and the lights up on my truck topper. Small and convenient, easy to install and the LED lights aren’t overpowering in the cab at night.
The picture shows the initial switch installed for my off-road lights. The 2nd switch now sits right next to this one. They don’t take up much room and they’re not very deep so a lot of room isn’t needed behind them for the wiring.
Jon&Rach –
I bought these a couple years ago and they worked out reasonably well for all my projects. Note: I always put a 560 ohm resistor on the ground terminal, since I don’t believe they actually have resistors hardwired.
When I ran out from the first bag, I bought them again. However, the new batch was different than the first one. My first batch was all built with the LED on the ‘on’ side of the switch, which made sense because the LED is on when the switch is on. The new batch was built in a way that feels upside-down to me: The LED is on the ‘off’ side, but still turns on when the switch is on (see photo).
I’m not sure if this was a conscious design change or a per-batch sort of thing, but I’m not a fan of the batch that I just got and probably won’t use them for anything important. I definitely won’t use them along side my old switches, because it would just be confusing.
C –
Useful single pole single throw switch that lets you know when it’s on. Like the round hole design for simplified instillation that looks nice. Will most likely use for 12 volt applications.
Nick N. –
I only needed one swift but for the price you get three !
installed onto daughters ride on and hooked up to some cheap car DRL’s (spliced into the 12v battery) and as i didn’t want it to be always on just because the battery was connected, this suited the bill perfectly to let my girls have real working lights for their car that they can turn off and on.
Drilled the hole right because the ‘gear shift’ on the dash and it looks every bit like the car was built with it. Extra nice touch is the little blue led that glows when powered on.
Can’t wait to find something to use the other two on 😉
ps. for a quick reference,
Earth (negative from power source) is the golden prong
Power in (positive from power source) is middle prong
Power out/on (for whatever you’re switching) is the furtherest away from gold prong
Deanna E. –
indicator light does work as described. turns on when ON position and does turn off when on OFF position. for those that assume that there isn’t a resistor for led yes it has one. since some of these switches do work for higher voltages you might want to check desciption first so that you don’t burn out led. also at higher voltages led might be a bit brighter so you might need to add a resistor on the negative side so that light isn’t too bright on the dash.
Life Is For Enjoying –
Delivered a day early. Definitely use again
Amazon Customer –
Works great thanks.
Keith Snipes –
work as they should