Frete Grátis em todos os produtos
Descrição do Produto: Partsam 10PCS Blue T4.7 Instrument Panel LED Light Gauge Cluster Bulbs
Transforme o painel do seu veículo com o kit de lâmpadas LED Partsam 10PCS Blue T4.7, projetado especificamente para modelos como Silverado, Suburban, Tahoe, Trailblazer e Yukon dos anos 2003 a 2006. Este conjunto inclui 10 lâmpadas mini soldáveis de 4.7mm, cada uma equipada com 3 chips LED SMD 3014, proporcionando uma iluminação azul vibrante e eficiente. As lâmpadas são ideais para a reparação de instrumentos como velocímetros, tacômetros, medidores de pressão de óleo, temperatura de transmissão, voltagem da bateria, temperatura da água e medidores de combustível.
Com uma ampla gama de aplicações, essas lâmpadas são a solução perfeita para restaurar a visibilidade e a estética do painel do seu carro. A instalação é simples e se adapta perfeitamente aos modelos mencionados, garantindo que você possa realizar a troca sem complicações. Além disso, as lâmpadas Partsam são projetadas para operar em baixas temperaturas e com baixo consumo de energia, oferecendo uma vida útil prolongada e uma excelente alternativa às lâmpadas de painel convencionais.
- Instruções de Uso:
Para utilizar as lâmpadas LED Partsam, você precisará desmontar o cluster do painel do seu veículo para acessar as lâmpadas antigas. Uma vez que você tenha acesso à placa de circuito, remova as lâmpadas defeituosas e solde as novas lâmpadas LED nos locais apropriados. É importante garantir que a polaridade esteja correta durante a instalação. Após a soldagem, reassemble o cluster e teste as lâmpadas para garantir que todas estejam funcionando corretamente.
Características do Produto:
– Tipo de LED: 3 SMD 3014 LED Chips
– Cor da Luz: Azul
– Dimensões: 4.7mm
– Consumo de Energia: Baixo
– Temperatura de Operação: Baixa
– Vida Útil: Longa duração
– Compatibilidade: Projetado para 2003, 2004, 2005 e 2006 Silverado, Suburban, Tahoe, Trailblazer, Yukon
– Instalação: Requer soldagem na placa de circuito
Perguntas Frequentes (FAQ):
Pergunta: Essas lâmpadas são fáceis de instalar?
Resposta: A instalação requer a desmontagem do cluster do painel e soldagem, o que pode ser desafiador para quem não tem experiência. É recomendável que um profissional realize a instalação.
Pergunta: Qual é a cor da luz emitida por essas lâmpadas?
Resposta: As lâmpadas emitem uma luz azul vibrante, ideal para melhorar a visibilidade do painel.
Pergunta: Essas lâmpadas são compatíveis com outros modelos de veículos?
Resposta: Este kit é especificamente projetado para modelos Silverado, Suburban, Tahoe, Trailblazer e Yukon dos anos 2003 a 2006.
Pergunta: Qual é a vida útil esperada dessas lâmpadas?
Resposta: As lâmpadas LED Partsam têm uma longa duração, superando as lâmpadas incandescentes tradicionais, mas a vida útil exata pode variar dependendo das condições de uso.
Pergunta: O que devo fazer se uma lâmpada não acender após a instalação?
Resposta: Verifique a polaridade da lâmpada e se a soldagem foi feita corretamente. Se o problema persistir, pode ser necessário verificar a placa de circuito para danos.
William Wideman –
Muy fácil de colocar y quedan perfectos
jessman123 –
Very bright lights and not hard to install. Just look up a YouTube video and you shouldn’t have a problem. Also to be noted, these work for more than just dash cluster lights! I used them for all of my switched including my steering wheel buttons and climate control buttons.
Brandon –
These worked out great. A little challenging soldering them in, but with my $10 soldering tool (from amazon) a little patience, and some YouTube videos, I was able to install these in my cluster. Big Upgrade for the old Chevy, the old lights were starting to fail. I would recommend buying an extra pack because I broke a couple of the leads while trying to seat them into the existing light housings.
Wyatt Bilodeau –
Lights are very bright and crisp. 2 of the 10 lights did not work when installed. 2 more have failed since installation.
jessman123 –
Work well, bright reliable and look good in a cluster, may get a lead to fall out once in a while but it’s a easy and what you expect from a Chinese mass produced product
Brandon –
These are exactly what I wanted and were perfect for what I wanted to use them for.
This is a very nice bright, almost black light but not, color royal blue LED!! I wanted these for my turn signals to compliment the white LEDs I got for the rest of the instrument panel. I was planning the use these for the entire panel till I found out you can not have a blue light on your car while it is in motion. So with this new found info I decided to use these for my turn signals and purchased their white LEDs also for the rest of the panel. I did have to bend the connectors on the LED to a “Z” like shape to ensure it was getting good contact and to make it easier to solder on.
I tip for bending the wire connections on these. Use two needle nose to hold tightly at the top near the LED and the other to create the bend. The solder at the LED board is very small and could not take the pressure of bending. The solder was more than sufficient for its purpose but not for this type of stressful bending.
Overall I couldn’t be happier with the way things turned out and HIGHLY suggest using this brand for your LED needs.
G45 –
Well let me start by saying I have already done this once. I desided to try it again with these new bulbs. Well after already doing this process once I had an advantage. Didn’t take me long to swap these out. Wow are they bright almost to bright but I’m not complaining. Desided to order more and do my climate control. My puppy ended up eating a little black silicon button and now I have to buy a whole new control console. But besides that everything was fairly easy. The gauges can be a little bit of a pain to get right but other than that it looks great. The bulbs are a little spotty (brighter in some areas than others).
Chogardjr –
Happy with results but Product needs a little work . My only real gripe is the legs are poorly soldered to two small posts at each end. if the posts were bent to the PCB and the legs were hole through and soldered it would be a much better design.
This product is sold to be for gauge clusters so manipulation of the legs for height and angle to provide maximum illumination. Due to the way the legs are soldered on they brake rather easy with minor manipulation.
End result is good, they are bright and work properly. Salvaged the two that legs broke off and soldered some small gauge wired to the posts for future projects. I bought these because they were Prime items and I knew I could get them when I needed for the Job. If I did not need it in a time frame It would probably be better to search around . I did not price them from directly from HK or Mainland CH and would imagine most are the same for the $8 I am not complaining but with the build quality on the legs $6 is more appropriate. So I guess the 2 bucks is going to the Prime Shipping.
Jesse –
I replaced all of my lights in my instrument cluster with these as the OEM started to fail. Well, after 18 months, all of these have failed. It was a lot of time, energy, and now frustration to have a dark dash dashboard while night driving. How fast are you going? No idea! Did not work for me.
Wyatt Bilodeau –
Dash looks sick. Bought a second set to do my friend’s