Filtro de Cabine Mann CUK 8430 com Carvão Ativado para Modelos Selecionados da BMW

*

O filtro de cabine Mann Filter CUK 8430 é projetado para modelos selecionados da BMW, oferecendo filtragem eficaz com carvão ativado. Suas principais características incluem a remoção de poluentes, odores e partículas, garantindo um ar mais limpo e fresco dentro do veículo. Além disso, sua instalação é simples e rápida, contribuindo para um ambiente mais saudável e confortável durante a condução. Ideal para quem busca qualidade e desempenho na filtragem do ar da cabine.

(3046 avaliações de clientes)

Descrição do Produto: Filtro de Cabine Mann CUK 8430 com Carvão Ativado para Modelos Selecionados da BMW

O Filtro de Cabine Mann CUK 8430 é a escolha ideal para quem busca um ambiente interno mais saudável e confortável em seu veículo BMW. Este filtro de ar de cabine é projetado especificamente para modelos selecionados da BMW, garantindo um encaixe exato e uma vedação perfeita, o que é fundamental para a eficiência do sistema de ventilação do carro.

Com a tecnologia de carvão ativado, o Mann CUK 8430 não apenas filtra partículas como pólen, esporos e poeira, mas também remove gases nocivos que podem afetar a qualidade do ar dentro do veículo. Isso é especialmente importante para motoristas e passageiros que sofrem de alergias ou problemas respiratórios, pois o filtro atua como uma barreira contra alérgenos e poluentes.

Além disso, o design do filtro permite uma ventilação ótima dentro do veículo, com baixa resistência ao fluxo de ar. Isso significa que, mesmo com o filtro instalado, o sistema de climatização do seu BMW funcionará de maneira eficiente, proporcionando conforto térmico sem comprometer a performance do motor.

Instruções de Uso:
Para instalar o Filtro de Cabine Mann CUK 8430, siga os passos abaixo:
1. Localize o compartimento do filtro de cabine em seu veículo BMW, geralmente situado atrás do porta-luvas.
2. Remova o porta-luvas, se necessário, para acessar o compartimento.
3. Retire o filtro antigo, tomando cuidado para não danificar as partes adjacentes.
4. Insira o novo filtro Mann CUK 8430, garantindo que a orientação do fluxo de ar esteja correta, conforme indicado no próprio filtro.
5. Recoloque o porta-luvas e verifique se está tudo em ordem.

Características do Produto:
– Tipo: Filtro de Ar de Cabine
– Material: Carvão ativado para absorção de gases nocivos
– Compatibilidade: Modelos selecionados da BMW
– Eficiência de Filtragem: Remove pólen, esporos, poeira e gases prejudiciais
– Fluxo de Ar: Baixa resistência ao fluxo, garantindo ventilação ideal
– Instalação: Encaixe exato e vedação perfeita

Perguntas Frequentes (FAQ):

Pergunta: O Filtro de Cabine Mann CUK 8430 é compatível com meu modelo de BMW?
Resposta: O Mann CUK 8430 é projetado para modelos selecionados da BMW. Verifique a compatibilidade no manual do proprietário ou consulte um especialista.

Pergunta: Com que frequência devo trocar o filtro de cabine?
Resposta: Recomenda-se a troca do filtro de cabine a cada 15.000 a 30.000 km, ou anualmente, dependendo das condições de uso e da qualidade do ar.

Pergunta: O filtro realmente ajuda a reduzir alergias?
Resposta: Sim, o carvão ativado e a filtragem eficaz do Mann CUK 8430 ajudam a remover alérgenos como pólen e esporos, melhorando a qualidade do ar dentro do veículo.

Pergunta: Posso instalar o filtro eu mesmo?
Resposta: Sim, a instalação do Filtro de Cabine Mann CUK 8430 é simples e pode ser feita por você mesmo, seguindo as instruções fornecidas.

Pergunta: O que acontece se eu não trocar o filtro regularmente?
Resposta: A falta de troca do filtro pode resultar em obstrução, reduzindo a eficiência do sistema de ventilação e comprometendo a qualidade do ar dentro do veículo.

Informação adicional

Manufacturer

‎Mann Filter

Part Number

‎CUK8430

Item Weight

‎8.4 ounces

Product Dimensions

‎13.02 x 0.54 x 2.56 inches

Item model number

‎CUK 8430

Is Discontinued By Manufacturer

‎No

Size

‎1.4" x 33.1" x 6.5"

Style

‎Activated Carbon

Material

‎Paper

Item Package Quantity

‎1

Number Of Pieces

‎1

Included Components

‎Cabin Air Filter

Batteries Included

‎No

Batteries Required

‎No

Date First Available

April 15, 2009

3046 avaliações para Filtro de Cabine Mann CUK 8430 com Carvão Ativado para Modelos Selecionados da BMW

  1. Alexandro

    Not much to say that it’s the OEM cabin filter. Fitting inside the housing was tight, as it should be.
    Installing it is one of the quickest and easiest maintenance tasks on my E90.

  2. D. Rencher

    Perfect fit vs. the BMW logo filter and substantially less money. THis is a charcoal impregnanted filter which has the effect of reducing the odors in the HVAC system.

    Time to replace is approximately 10 minutes removing and replacing 6 screws. Be careful you don’t lose the screws down amongst the engine. You won’t get them back.

    Be extra careful when replacing the screws that you get the threads started in the same grooves in the plastic cowling. You do this by finger inserting, backing them out counter-clockwise until you feel a “click” as the initial screw thread drops into the first starter groove in the cowel. This you do to ensure the screw threads chase down the original groves and do NOT enlarge the screw hole to the point of uselessness. While this technique works better with metal nuts and frame parts, it can and does work when replacing screws in plastic and wood (if you are a wood worker or want to have a go at repairing the dining room chair seat frame.)

  3. Andrew

    Easy to replace with an 8mm socket driver to remove screws securing the cover and out with old and in the with the new in about 10 mins. A snug fit proved the quality of the Mann filter and worthwhile paying for, rather than the cheaper versions available.

  4. Seahawks4life

    Since buying my vehicle, I never changed the filters. The original was dirty and this was a bargain and easy to replace. The quality seems similar to the original. It fits nicely and does the job.

  5. ted florez

    Only the best parts for our 2011 BMW 328xi it’s a perfect fit

  6. Harold

    Replaced 2009 BMW cabin filter. This was a perfect fit, well packaged and excellent instructions. Saved money doing this myself.

  7. Mona

    Good

  8. Nicole C.

    High quality filter that fits my car; product arrived snapped at cross piece and a tab was broken off. Since I didn’t check its integrity before I took out my old filter (and dropped a bolt in the process), I put it in and made it work. It’s been fine. I think it helped with my car’s interior residual smoke smell.

  9. RC

    Super easy install saves money – helps keep allergies at bay .. resetting service indicator steps I used for a 2006 BMW 330i

    Step 1
    Insert key into slot
    Step 2
    Press start/stop button without depressing clutch/brake and wait for the service reminder to dissapear.
    Step 3
    Immediately after service reminder goes out, press and hold the odometer reset. After 3 secs a warning triangle will appear, keep the odo. button pressed and after another 2-3 secs the Oil can will appear. I f you hold it too long (10 secs in total) you will overshoot the runway and some German writing will appear giving the software level/ can bus etc. of the car. Go back to the beginning and start again.
    Step 4
    You are now in the service menu, use the toggle switch on indicator stalk to scroll up/down through the various service items.
    Step 5
    When you have the item you want to reset showing, press the BC button on end of indicator stalk. Reset should now appear in the display. Press in and hold the BC button for 2-3 secs and a clock will start whirling around and hey presto, its done
    Step 6
    You can now either scroll up/down to select another item (as in step 4) or you can press the start/stop button to exit.

  10. Doug S

    This Mann cabin air filter is OEM quality and a perfect fit for our 2015 BMW X1. The dark side is carbon impregnated, which is exactly what you want to remove volatile airborne contaminants. Just six screws to remove the filter housing under the hood, then undo the plastic clips holding the filter in the housing. Getting new filter back in the housing is a little tricky – just take your time and don’t break the plastic tabs. It may help to warm-up the housing and filter to room temperature, so the plastic is more pliable. Be sure to clean-out any leaves, dirt or debris under the filter housing before re-assembling.

Adicionar uma avaliação

O seu endereço de e-mail não será publicado. Campos obrigatórios são marcados com *