Frete Grátis em todos os produtos
### Descrição do Produto
O Substituto de Bico para Lata de Combustível é a solução ideal para quem busca praticidade e eficiência no abastecimento de óleo. Com um comprimento de 8,1 polegadas, este bico é compatível com a maioria das latas de óleo de 1, 2, 5 e 10 galões, tornando-o uma escolha versátil para diferentes necessidades. O design aprimorado permite que o bico se encaixe em bocais de latas com diâmetros que variam de 1,7 a 1,82 polegadas, garantindo que você possa utilizá-lo em diversas situações. Antes de realizar a compra, é recomendável medir o tamanho da boca da sua lata de óleo para assegurar a compatibilidade.
Fabricado em material HDPE de alta qualidade, este kit é projetado para durar. Os tubos são moldados em uma única peça, eliminando a necessidade de conexões secundárias que podem comprometer a resistência e a durabilidade do bico. Você pode manobrar o bico livremente sem o risco de quebras. Além disso, as gaxetas de borracha mais grossas e largas proporcionam um encaixe melhor na tampa da lata, prevenindo vazamentos durante o abastecimento.
O design anti-transbordamento é uma característica essencial deste produto. O tubo do bico e a tampa do bico possuem roscas, e a tampa conta com uma gaxeta de vedação de borracha interna. Após o uso, basta apertar a tampa de saída de óleo para evitar qualquer transbordamento, mesmo durante o transporte ou se a lata estiver inclinada, garantindo sua segurança absoluta.
Este kit também cobre uma ampla gama de latas de óleo, pois oferecemos dois tipos de tampas de ventilação para latas de combustível. A Tampa de Ventilação A é utilizada em latas sem ventilação na extremidade, necessitando apenas de um simples furo e instalação. Já a Tampa de Ventilação B é destinada a latas que já possuem uma tampa de ventilação, permitindo a substituição de tampas antigas.
A instalação é simples e prática. Cada conjunto inclui 12 tampas de colarinho com rosca (6 de rosca grossa e 6 de rosca fina), 6 bicos brancos e gaxetas de borracha, 6 tampas de bico com rosca, 2 tipos de tampas de ventilação e a broca necessária para instalar a tampa de descarga de gás. Caso precise de assistência durante o processo de instalação e uso, nossa equipe está pronta para ajudar rapidamente.
### Instruções de Uso:
1. Preparação: Antes de instalar o bico, verifique o tamanho da boca da sua lata de óleo e escolha a tampa de ventilação adequada.
2. Instalação: Utilize a broca fornecida para fazer um furo na tampa da lata, se necessário. Em seguida, fixe a tampa de ventilação escolhida.
3. Montagem do Bico: Conecte o bico à boca da lata, assegurando que a gaxeta de borracha esteja bem posicionada para evitar vazamentos.
4. Abastecimento: Ao abastecer, mantenha a lata na posição vertical e utilize o bico para direcionar o fluxo do óleo. Após o uso, aperte a tampa de saída para evitar transbordamentos.
### Características do Produto
– Comprimento do Bico: 8,1 polegadas, ideal para latas de 1, 2, 5 e 10 galões.
– Material: HDPE de alta qualidade, resistente e durável.
– Design Anti-Transbordamento: Tampa com rosca e gaxeta de vedação para evitar vazamentos.
– Compatibilidade: Adequado para bocais de latas com diâmetros de 1,7 a 1,82 polegadas.
– Facilidade de Instalação: Inclui todos os acessórios necessários para uma instalação rápida e eficiente.
### Perguntas Frequentes (FAQ)
Pergunta: O bico é compatível com todas as latas de óleo?
Resposta: O bico é compatível com a maioria das latas de 1, 2, 5 e 10 galões, desde que a boca da lata tenha um diâmetro entre 1,7 e 1,82 polegadas.
Pergunta: Como posso evitar vazamentos durante o abastecimento?
Resposta: Certifique-se de que a gaxeta de borracha esteja bem posicionada e aperte a tampa de saída após o uso para evitar qualquer transbordamento.
Pergunta: O que fazer se eu tiver problemas durante a instalação?
Resposta: Nossa equipe de suporte está disponível para ajudar. Basta entrar em contato conosco e responderemos rapidamente.
Pergunta: O material do bico é resistente?
Resposta: Sim, o bico é feito de HDPE de alta qualidade, projetado para ser durável e resistente a quebras.
Pergunta: Posso usar o bico em latas que já possuem uma tampa de ventilação?
Resposta: Sim, oferecemos tampas de ventilação que podem substituir as tampas antigas, garantindo que você possa usar o bico em latas com ou sem ventilação.
Jason –
Hard to screw caps onto gas cans. The threads dont line up properly. You have to force start it. Once you do that and screw it on and off several times it is good. The seals are good on these and they do not leak gas. So overall a decent set.
Robert M –
Good quality but made for small cans
Halbred –
Excellent replacement for a 5 gal. gas can. Th old funnel finally cracked and this new one fits perfectly and is NOT on of the new “safe” funnels; its just simple and it works! Would recommend for any replacement need.
Kelly –
Good fit, three different thread options and a drill for venting hole included.well done!
Drew400 –
Easy to use and work well. The drill and plugs/caps for ventilating your gas can are a nice bonus.
Amazon Customer –
Happy with this product.
Amy Vander Baan –
These worked great and I had no issues with leaking. The only improvement would be to include a couple of them in the box for larger openings. I had one gas can that they were too small to fit.
Eric M –
If you’re reading this, then you are looking to replace your spouts from CARB compliant gas cans that not only do not work well, but they hinder you from filling a tank. But because of government overreach, you now cannot buy a new gas can that is not CARB compliant. (I am from California, the origin of such stupidity. I apologize on behalf of my fellow citizens.) There is nothing stopping you however from modifying said gas cans.
I am an Uber driver, so I thought rather than going to the gas station every day, I would just get some gas cans, fill them all at the gas station, and just fuel back up at home later at my convenience, especially if it’s late at night and only the more expensive 24/7 stations are open. The problem is that any gas can you can buy now is ridiculously cumbersome and fills extremely slow with the nozzles provided. It would take me over 6-10 minutes each to empty my 5-gallon cans into the tank with the provided nozzles, depending on how much the nozzles chose to suck.
With this kit, I cut that down to about 2 minutes to empty a 5-gallon can. So it really does work as intended. This is especially helpful since I have to awkwardly hold the can at an angle to fill the tank, and the less time it takes, the better because of the weight I have to hold.
The top-hat looking caps twist on in order to get a better seal on the spout. What makes this kit better than others I have bought and tried is that the plastic for the nozzles is pretty thick. With others, the plastic was very thin, and when I would try to use them, the weight of the gas can would flatten the nozzle and deform to the point that they would split open or squeeze the hose enough to prevent flow. The gaskets on the others were also weak and cheap, breaking on the first use, and would leak gas everywhere too. The rubber on these gaskets are pretty strong and I have not experienced any breaks, deformities, or wear yet. No leaks either. So while you get more stuff for less for other kits, the quality just isn’t there and they’ll be useless to you, especially so on bigger cans.
One thing I did not like about these is the included drill bit. It does not work well at all. If you have something better like a titanium bit, just use that. I tried the one included first and it took me well over 20 minutes to get into the plastic while also trying to use a hole punch. On my second can I used my own titanium one and it took only a couple minutes. The venting caps went in no problem and offer a tight seal while also giving away very easily to allow venting.
Be forewarned, there is a chance the caps for the nozzles’ base (collar caps) may not screw on to your gas can very well, even if you’ve measured the diameter of the can opening. The coarse cap did well on my Midwest brand gas cans, however it did not for my Garage Boss brand cans. While I did get them on the GB ones eventually, it took a wrench to get it back off; just not an option when you’re at the gas station trying to get them off to get the gas in.
I highly suggest buying Midwest gas cans not only because I know these caps play nice with them but also since they have that convenient side handle when you have to hold it awkwardly to pour it. They’re usually available at Menards, Target, and Harbor Freight, and other retailers, but the first three tend to have the better prices, far better than Amazon. Beware CA residents that they cannot be shipped to you.
So far, no leaks from the collar cap or nozzle and I’ve been using it for almost a year now after more than 100 fill ups and outdoor storage. No signs of deformities, cuts, or even discoloration, including the rubber gaskets inside.
S.H. –
I bought a new 5 gal Scepter gas can. Of course the newer style government mandated spouts are horrible. I purchased this kit, used the included drill bit to drill the vent hole and popped in the vent. I removed the spout, the green spout lock, and the fuel screen (all useless junk). I used the coarse threaded collar which fit perfect. It took me just a couple minutes total, no leaks, works great!
Renee G –
I was hesitant to order one of these, as I wasn’t sure how quality it would work out. But after finally being fed up with terrible modern gas can’s obama-spouts, I pulled the trigger.
Very glad I did. This kit was an absolute breeze to use. Came with two separate thread style of caps, and the proper size drill bit with the vents that you press in to the hole you just drilled. Cap threaded on easily and sealed tight, the vent pops in with a decent amount of pressure(more force than you think you’ll need), and it holds pressure great. I can squeeze the sides of the can and no air or pressure escapes. When I pop the vent or twist the hose off, you can hear the sudden release of air.
Very pleased for such an inexpensive kit. Buy with confidence. Took maybe 2 minutes to do two cans. I will order another of these so I can do my remaining two cans. So easy to pour now!