Frete Grátis em todos os produtos
### Câmera de Ré com Espelho Retrovisor e Monitor de 4,3”: Visão Noturna Superior e Instalação Simplificada
A Câmera de Ré com Espelho Retrovisor e Monitor de 4,3” é a solução ideal para motoristas que buscam segurança e praticidade ao estacionar. Com um design elegante e funcional, este produto não apenas substitui o espelho retrovisor original, mas também oferece uma visão clara e precisa do que está atrás do veículo, eliminando os pontos cegos que os espelhos convencionais não conseguem alcançar.
#### Instalação Simples com Um Único Cabo
A instalação da câmera de ré é descomplicada, utilizando um único cabo que se conecta diretamente ao espelho retrovisor. Isso significa que você não precisará mais ocupar a tomada do acendedor de cigarros, liberando espaço para outros dispositivos. Ao conectar o cabo de vídeo à lâmpada de ré, a imagem da câmera é exibida automaticamente no monitor sempre que você engata a marcha à ré, proporcionando uma experiência de estacionamento segura e sem esforço.
#### Montagem OEM para um Acabamento Elegante
O suporte de montagem OEM da câmera de ré garante que o espelho retrovisor se integre perfeitamente ao design do seu veículo, sem causar danos ou vibrações. Isso resulta em um visual limpo e sem distrações no painel, permitindo que você se concentre na estrada.
#### Visão Noturna Superior
Equipado com 6 LEDs de alta luminosidade, o sistema de câmera de ré ativa automaticamente a iluminação em condições de baixa luminosidade. Isso permite que você identifique placas de veículos e detalhes importantes na estrada, mesmo em ambientes escuros, aumentando a segurança durante a condução noturna.
#### Sinal Estável e Imagem em Tempo Real
Diferente dos sistemas de câmeras sem fio, a câmera de ré com espelho retrovisor utiliza transmissão via cabo, garantindo um sinal mais forte e uma imagem em tempo real sem atrasos ou flickers. O sensor de alta qualidade proporciona uma imagem nítida e clara do que está atrás do seu carro, permitindo manobras precisas.
#### Câmera à Prova d’Água com Classificação IP68
A câmera de ré é projetada para resistir a condições climáticas adversas, com uma construção robusta e vedação completa que evita embaçamento após chuvas ou lavagens de carro. Isso garante que você tenha uma visão clara em todas as situações.
#### Câmera Universal para Placa de Licença
Com um cabo de vídeo de 6 metros, esta câmera é compatível com uma ampla gama de veículos, incluindo sedãs, vans, caminhões e SUVs. Para veículos maiores, é possível adquirir um cabo de extensão adicional.
### – Instruções de Uso:
Para utilizar a Câmera de Ré com Espelho Retrovisor, siga os passos abaixo:
1. Instalação: Conecte o cabo de vídeo à lâmpada de ré do seu veículo. Certifique-se de que a conexão esteja firme e segura.
2. Montagem: Remova o espelho retrovisor original e instale o novo espelho retrovisor com a câmera, utilizando o suporte OEM.
3. Ligação: Verifique se a câmera está corretamente conectada e teste o funcionamento ao engatar a marcha à ré. A imagem deve aparecer automaticamente no monitor.
4. Ajustes: Ajuste o ângulo do espelho retrovisor conforme necessário para obter a melhor visão.
### Características do Produto
– Instalação: Conexão via cabo único, sem necessidade de ocupação da tomada do acendedor.
– Montagem: Suporte OEM que se integra ao design do veículo.
– Visão Noturna: 6 LEDs de alta luminosidade para melhor visibilidade em ambientes escuros.
– Transmissão: Sinal estável via cabo, sem atrasos ou flickers.
– Impermeabilidade: Classificação IP68, resistente à água e ao embaçamento.
– Compatibilidade: Cabo de vídeo de 6 metros, adequado para diversos tipos de veículos.
### Perguntas Frequentes (FAQ)
Pergunta: A instalação da câmera é difícil?
Resposta: Não, a instalação é simples e pode ser feita com um único cabo, sem necessidade de ferramentas complexas.
Pergunta: A câmera funciona bem à noite?
Resposta: Sim, a câmera possui LEDs de alta luminosidade que garantem uma visão clara mesmo em condições de baixa luz.
Pergunta: A câmera é resistente à água?
Resposta: Sim, a câmera possui classificação IP68, o que significa que é totalmente à prova d’água e não embaça.
Pergunta: É compatível com todos os tipos de veículos?
Resposta: A câmera é universal e se adapta à maioria dos veículos, mas recomendamos verificar a compatibilidade com seu modelo específico.
Pergunta: O que fazer se a imagem não aparecer no monitor?
Resposta: Verifique as conexões do cabo e certifique-se de que a câmera está corretamente instalada e conectada à lâmpada de ré. Se o problema persistir, entre em contato com o suporte técnico.
Kamuela –
I have used this for about two months now and overall am pleased. Installation was very easy and I am particularly pleased with the rearview mirror(different brackets supplies for different vehicles). It is well built and actually looks almost identical to the stock mirror(I have not experienced any vibration). What I wasn’t so pleased with is the washout on a bright day and the grainy night vision but it did an adequate job of providing a clear enough picture that I could tell if there was anything in my path. Also I covered the sensors with a small piece of electrical tape and that brightened the picture in the daylight. And the warranty is 12 month and customer service is excellent with providing any help if needed and I would purchase this again in the future. I gave this 4 stars only due to the night vision and the wash out in the sun but all in all a good value.
Bigg –
Have been using this system for about a week. The installation was relatively simple on a 2007 Camry XLE. Had to give up my auto dimming nighttime mirror. 😢 Learned the hard way that I needed to follow the intallation directions and connect the common wire to the car body/ground. First connected to the common wire connected to the backup light and it seemed to work when I did the test before closing everything up. Got all done and found it not working. Had to go back and access the backup light and connect the wire to the car body.
I am very pleased with the simplicity of installation and function of this system. Don’t need all the extras that come with other systems. The nighttime view is very good. I would agree with some others that the daytime view is brighter than need be, but it is definitely functional. Of all that I looked at online, I’m pleased that I chose this one. The longevity of this system of course remains to be seen.
mjj01 –
OK, I watched a couple of Youtube videos on installing backup cameras (this one on a 2015 Nissan Xterra) and it looked tons easier than when I put the OEM camera in my wife’s Scion xB. That was no fun at all. This one looked like a 2-hour job to me, no special tools except plastic trim removers, which I have.
I was a little skeptical of the price, however.I had previously ordered, and returned, a similar system from another vendor. It cost double what this one does, and showed up battered and missing parts, obviously somebody’s return. I expected this to be cheesier.
I was wrong, it is much, much nicer appearing, and a snap to install, relatively. Mostly, it’s a matter of removing a bunch of plastic panels in the rear cargo area to fish the wire through. Note I said “wire”. Unlike many other systems, it gets both power and turn-on signal from the backup light, so there’s no running separate power wires to the front or tapping into fuses or things like that. Just tap the two wires from the camera into the backup light wiring (easy, red is red and black is black), plug the signal cable in and run it up to the mirror. Which, by the way, is slightly bigger than the OEM mirror, not a bad thing at all. This might seem minor, but it’s not. It makes the installation go much, much faster and easier. It took less than an hour and a half, start to cleanup. Again, it’s probably easier to install than a wireless unit, which would require finding power at both ends.
Unlike other license plate-mounted cameras, this one is cantelevered back from the frame so I can keep my custom frame. Another minor but satisfying point.
A couple of minor issues. The mirror might be a bit wobbly, I’m not sure, I might put a dab of silicone on the mount. Or I might not; you want mirrors to be fragile so they snap off in a crash instead of punching holes in your skull.
Also, the backup display on the left side of the mirror takes getting used to. You can either focus on the display, or focus on the image in the mirror, but not both at the same time. It took all of 3 times to figure it out, so not a big deal.
It comes with clear instructions and an extra 10ft or so of cable, which I did not need. In fact, I bundled up about 3ft of cable and hid it under the passenger kick panel. There’s plenty of wire for even the longest vehicles.
The image is clear, dims at night. the default is red and yellow markers and a blinking “STOP” in the display, which I left. You can disable that by clipping a wire, but I like the markers.
If I had anything at all I’d recommend to the vendor to change it would be to add some kind of manual brightness control so people like me, who like to fiddle with things, would have another thing to fiddle with.
Edit; more information. Direct sunlight on the display washes it out some, but it’s still legible. I suppose this could be more of an issue in a convertible. In bright daylight, the video gain is a bit high, probably in an attempt to overcome the potential washout problem; the display is actually too bright. Again, not a serious issue; I’ve never seen a backup camera that I would watch movies on. It works fine for its purpose.
If I had to do this again, I’d run the video cable along side the wiring to the license plate lights, which on an Xterra, go to the driver’s side rather than the passenger’s side, reason being it would give me something under the bumper to cable-tie that vulnerable wiring to. In general, I’d look a little harder for an existing wire run to follow rather than just pushing through. Not a real problem, just an installation note. Also, there is a plastic trim tool included in the box, suitable for removing the plastic trim for routing the wiring. It’s not the best trim tool I’ve ever used, but it does the job and it’s free, another little plus. And the mirror is not at all wobbly, so that worry is gone.
All in all, I’m very pleased. Easy installation, works great, very reasonable price. What’s not to like?
ARTHUR SKOK –
The easiest back up camera I have ever installed. Picture good, one happy camper!
Jason –
Great value for the money and the installation was easy as could be .
mjj01 –
I am very pleased with this camera kit. I really prefer the camera image in the mirror over an image in the center of the dash like all newer cars have so I am glad I found this one. I installed it in a 2013 Mazda 3 hatchback about 2 months ago and it has worked flawlessly since. Happy with the camera quality and mirror. The installation took me a few hours taking my time to remove trim pieces, etc to have a nice clean hidden install. The kit had everything I needed and more than enough wire length. The only issue I ran into during install is there is some sort of inline fuse plastic thing on the wire that goes to the reverse lights. Because I have a hatchback and the reverse lights are in the hatch portion this somewhat large inline plastic piece on the wire made it difficult to route and find a place for it to fit under the interior trim of the hatch. I wish this piece had been in a different location inline, maybe closer to the end of the wire, but everything worked out fine in the end.
Steve G –
I like the quality of the the components and the ease of installation. I’m pleased with the features of this unit and clarity on the screen. This looks like a factory system.
Mike –
Liked the fact that the only power required was from reverse light tap
Amazon Customer –
I gave them a 4 because their customer support was very good. Quick replacement and refund. The quality of the product isn’t the best. It works for awhile then failed.