Frete Grátis em todos os produtos
- Shock Struts for Mercedes-Benz Sprinter 907 910 VS30 2018-Present
- Various colors of lift supports with carbon fiber are provided, which are corrosion-resistant, durable and deluxe
- Easy to install by simply turning the screws; Can be done by yourself in 30 minutes without any modification or drilling
- Complete kit set includes gas struts and other accessories for installation; Detailed installation manual will be attached in package
- The dampers can match the specific car models perfectly
ENERGY SUSPN Energy Suspension 7.7106R Strut Rod Set for Nissan , Red
*$493.00
2Pcs Rear Hatch Lift Supports Struts Shocks for 2005-2008 for Honda Odyssey, Liftgate Struts & Tailgate Shocks & Gas Springs Replace 6117 PM9019 SG126007
*$433.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
TSUBASA Lift Supports for Mercedes-Benz Sprinter 907 910 VS30 2018-2024 Front Bonnet Hood Modify Gas Struts Shock Dampers Spring Rod 2PCS (Black Carbon Fiber)
*$855.30
Informação adicional
| Brand | Tsubasa |
|---|---|
| Color | black |
| Material | black carbon fiber |
| Auto Part Position | Front |
| Manufacturer | TSUBASAKJ |
Official Ben –
Easy fit product works well with all Mercedes factory bolt holes
Derek Williams –
Quick and easy to install. Was impressed with how good they work. So far so good it isn’t something that will be overused. Would buy again if needed.
bight –
Great value & work fine. Installation is a bit more difficult than the reviews state & the instructions are just a picture of what the struts look like assembled so not much help. Here’s what I learned:
Get someone to hold the hood up while the struts are installed or find something to prop the hood up. One of the struts uses the hole that the stock hood brace fits into. Would have been very easy if I knew all of this before I started.
Don –
The factory Mercedes Benz hood support strut is difficult to use with hood add ons making the hood even heavier. These hood supports were very easy to install and took about 10 minutes. The hoods opens easily and the struts push the hood up without effort. The open hood height with these struts is significantly higher angle than the stock single strut allowing for better and safe access to engine fluids.(i.e.oil, DEF, washer fluid). Can’t believe I struggled with the original strut for so long. If you have a MB Sprinter this is a great solution.
Cindy N. –
This item was easy for one person to install, and the instructions were clear and easily followed. I have had these struts installed for over a year and they perform flawlessly. They prevent accidentally bending both the original support rod and the hood latches. A well designed, easy to install accessory.
William D. Nelson –
I bought these to eliminate the dreaded one hand lift and hold while trying to place the hood hold up rod on my Sprinter. I looked at many brands, and these seemed to be reasonable quality at a decent price, and they are! They are good quality, very good price, and very easy to install. I looked at other brands but the price was very high compared to these. The install was about 15 minutes, and I did have to place a flat washer under the bottom bracket to raise the bracket just a little bit to keep it from rubbing on the fender frame. Do not fret when you install these thinking they are seized as they are not. You cannot move the gas lift by hand, and have to install them, then raise and lower the hood and the pistons will adjust. Time will tell how they hold up, but it is great just lifting the hood and not doing the one hand hold anymore! I recommend these!
William D. Nelson –
purchased X AUTOHAUX version and the brackets were too small junk. these brackets are excellent build quality and size and fit the winnebago REVEL, 2019 mercedes sprinter perfectly. super easy install. they hold the hood up fine. we will see how the shocks hold up over time. like 1/3 the vanlife/overlander store cost. get em while you can.
M.A. –
Purchased this for my 2022 Mercedes sprinter van. The factory hood prop was always annoying in my opinion.
When I search the web for a hood shock solution, I was actually surprised that the ones that popped up were up to $150 someone that said it before, but these pneumatic shocks are relatively inexpensive so when I found this kit on Amazon for $42 I figured to give it a try.
Insulation was very simple with some hand tools. You need a 10 mm socket and 12/13 mm opening. Wrenches insulation takes only a few minutes, but you need someone to help you hold the hood up while you work on it.
When you’re ready to attach the strut to the hood, do not compress them with your hand to try to fit if the shock is too long just hold the hood up higher until the ball socket connects then you’re in good shape
PL –
Super impressed by this. Quick install, works great. They somehow found the perfect amount of stiffness to keep the hood up, but easy to close with little effort.
Other options are $150 or more.
PL –
I bought this and paid someone to install on my sprinter van since I’m struggling to raise the heavy hood. But now I regret that I replaced the original hood stand. I realized why MB didn’t use a hydraulic shock to keep their hood open. It’s super heavy and for safety reason, manual stand is the best option.
I found out that when you use these shocks, you need to open the hood all the way, othersiwe the heavy hood will slowly come down and when it’s about halfway, it will suddenly slam down violently that if your hands or you head are inside, you may seriously get hurt.
These hydraulic shocks are not capable of keeping the hood open halfway. It’s not strong enough. Just be mindful when you already have these installed. I don’t recommend these shocks.