Frete Grátis em todos os produtos
### Descrição do Produto
A nova braçadeira de terminal positivo da bateria, modelo NEW BT4Z-14450-AA, é a solução ideal para quem busca qualidade e eficiência na conexão elétrica de veículos. Este produto é um ajuste direto, fabricado como peça original (OEM), garantindo uma instalação fácil e rápida. A braçadeira inclui porcas de grau automotivo M6 e M8, proporcionando uma fixação segura e confiável.
A NEW BT4Z-14450-AA é um substituto direto para o modelo EDGE, mas também pode ser utilizada como uma alternativa aceitável para diversos outros veículos, incluindo o F-150, Explorer, Expedition, Focus, Fusion e Flex. Além disso, é uma excelente solução de substituição para modelos da GM, como Chevrolet Impala e Taurus, entre outros. Para facilitar ainda mais a instalação, vídeos tutoriais estão disponíveis no YouTube, oferecendo um guia visual passo a passo.
### Instruções de Uso:
Para utilizar a braçadeira NEW BT4Z-14450-AA, siga os passos abaixo:
1. Desconectar a Bateria: Antes de iniciar a instalação, desconecte o cabo negativo da bateria para evitar qualquer risco de curto-circuito.
2. Remover a Braçadeira Antiga: Utilize uma chave apropriada para remover a braçadeira de terminal positivo antiga, soltando as porcas M6 ou M8.
3. Instalar a Nova Braçadeira: Posicione a nova braçadeira NEW BT4Z-14450-AA no terminal positivo da bateria e fixe-a utilizando as porcas fornecidas. Certifique-se de que a conexão esteja firme.
4. Conectar a Bateria: Após a instalação, reconecte o cabo negativo da bateria e verifique se a conexão está estável.
5. Testar o Sistema: Ligue o veículo e teste os sistemas elétricos para garantir que tudo esteja funcionando corretamente.
### Características do Produto
– Modelo: NEW BT4Z-14450-AA
– Tipo: Braçadeira de terminal positivo da bateria
– Compatibilidade: Ajuste direto para EDGE; substituição para F-150, Explorer, Expedition, Focus, Fusion, Flex, Chevrolet Impala, Taurus e outros modelos.
– Material: Fabricado com materiais de alta qualidade para resistência e durabilidade.
– Porcas Inclusas: Inclui porcas automotivas M6 e M8 para instalação imediata.
– Instalação: Design que permite uma instalação simples e rápida, sem necessidade de ferramentas especiais.
– OEM Original: Garantia de qualidade e compatibilidade com os padrões de fábrica.
### Perguntas Frequentes (FAQ)
Pergunta: A braçadeira NEW BT4Z-14450-AA é compatível com meu veículo?
Resposta: A braçadeira é um ajuste direto para o modelo EDGE e pode ser utilizada como substituição para diversos modelos, incluindo F-150, Explorer, Expedition, Focus, Fusion, Flex, Chevrolet Impala e Taurus. Verifique a compatibilidade específica do seu veículo.
Pergunta: É difícil instalar a braçadeira?
Resposta: Não, a instalação é simples e pode ser realizada com ferramentas básicas. O produto vem com porcas M6 e M8, e vídeos tutoriais estão disponíveis no YouTube para ajudar no processo.
Pergunta: O que fazer se a braçadeira não se encaixar corretamente?
Resposta: Se a braçadeira não se encaixar, verifique se você adquiriu o modelo correto para o seu veículo. Caso tenha dúvidas, consulte um profissional ou assista aos vídeos de instalação disponíveis.
Pergunta: A braçadeira é resistente a corrosão?
Resposta: Sim, a NEW BT4Z-14450-AA é fabricada com materiais de alta qualidade que oferecem resistência à corrosão, garantindo durabilidade e desempenho a longo prazo.
Pergunta: Posso usar esta braçadeira em veículos de outras marcas?
Resposta: Embora seja projetada principalmente para os modelos mencionados, a braçadeira pode ser utilizada como uma solução de substituição em outros veículos, desde que as especificações do terminal sejam compatíveis.
dewitt maddox –
Fit my 2014 ford f150 perfectly . Easy installation and no problems.
Tiffany –
The part was correct for my application, it was delivered on time at a great price, after reviewing installation techniques all went well.
The old one just dremmeled off, the new one crimped on with vice grips and a bolt. Great inexpensive fix and feels good to stick to big auto parts department. Recommend this product without hesitation
RJ –
Purchased for 2014 Ford F-150. Only needed Positive terminal and Ford only sells an expensive wire harness/cable. This was mentioned from other users on Ford Forums and YouTube.
Perfect fit, durable and well made, clamped tight, all connections fit. Will definitely purchase this again if needed. I only replaced the Positive terminal connection due to a corrosive battery that was replaced at the same time.
I was skeptical this part would fit the F150 but it does even though it’s not marketed for it.
Michael W. Erickson –
The part is the exact replacement for the factory positive terminal, except that the nut to tighten down on the lead lug is a slightly larger nut than 8 mm. To get the old part off, I had the same issue with the crimped down battery cable that points down towards the engine. To remove it, I removed the battery, then removed the two nuts on the positive terminal to get those wires out of the way. After that, to remove the crimped fitting, I saw where some people used a dremel tool. I didn’t have one, but my Dewalt angle grinder fitted with a paint-sanding wheel did the trick in about 3 minutes. I ground away one of the crimps and some of the second side and the fitting came right off. To re-clamp the new fitting, I used channel lock pliers to crimp down both sides, and to finish the crimp, I took a 5/16 inch bolt and placed it on the seam of the two wings and used vise grips to smash the bolt into the seam – it crimped both wings down perfectly. Electrical tape over the connections, and bolting back up took minutes. Altogether, a 30 minute job. Plenty of anti-corrosion spray over the terminal – the original one was corroded badly. I still am likely to need to replace the battery, but this connection won’t go bad again.
Tiffany –
This is a good product but unfortunately did not work for my application. Seller is great! They refunded me promptly. Would do business again.
Melissa –
This product was exactly what I needed. I looked locally and couldn’t find this terminal. Of course it’s on Amazon! I had lost some parts changing the battery and couldn’t find a replacement locally. I looked online and found this one. It was perfect.
None Ya Business –
I went to the Ford dealer for normal maintenance, and they take forever, then bring me my truck and say “we want to show you something”. They pull the battery cover and reveal that the positive post is covered in blue corrosive goo (looks squishy, likely full of acid, etc), so I have them brush it off to see what’s under it. The original cable/connector looked pretty bad (made of copper) and the blue goo was from the (leaking battery acid – which was from a replacement battery they had put in 2 years prior (which had zero warranty since it was a warranty replacement itself.
I asked how much to replace the connector, he said the part was $395. I said you mean $3.95? He repeats the original $395. I laugh, tell him no freakin way. Then I ask how much they charge to install this particular item and he said $600. So, about $1K for a eroding battery terminal which just happens to also attach to the downlines (none of which are even dirty). I decline, instead purchase this product, a new battery (from Costco for $99), some battery prep spray to keep corrosion off and some of those nice green/red felt pads to put at the base of the terminal posts and finally some shrink wrap tubing. Total expense $99 + 46 for everything else. Getting the old part off was not fun since I don’t have a cable crimper/remover, so I used an old dremel tool and cored out the center of the crimp, which then let the master cable come out almost perfectly without damage. I then used he-man strength and pliers to crush the crimp onto the cable and did it in 3 directions for good measure. Finally I used the shrinkwrap. My friends couldn’t believe it was not that way from the factory, so I guess I did it right. It’s been flawless now for 4 months, so I’m confident the Positive Battery Terminal Clamp w/Nuts is a solid product. Also, don’t be cheap. Get this one with the nuts instead of the slightly cheaper one without nuts. The old ones will likely work, but they will already be old, gunked up and potentially have microscopic erosion taking place. When everything is installed, spray it down with anti-corrosion spray.
Hopefully this helps. 🙂
Rice Family –
My 2017 Ford Expedition Platinum had the positive battery cable completely corroded. It was so extreme it actually ate the entire female connector around the terminal. I took it to the Ford dealer and they wanted $980 for the entire cable assembly and labor. My service tech spoke to the Ford parts manager and that was the only option. I found this part on Amazon. Purchased it and installed it. The process took about 30 minutes and required some tools. The only difficult part was crimping the part to the wires to make it all hot (connected). The part has wings to fold to crimp. Works wonderfully. With all said and done my issue is fixed for under $20. Amazing!
Rice Family –
So my car is a Chevy Aveo Hatchback 2009. The specific part for my car was discontinued (yay) so we had to find a replacement alternative. This one worked! The positive terminal clamp was wearing out and not getting a good grip and signal. My car wouldn’t start some days. We replaced it and this took some work because my car manufacturer wanted to make it slightly hard. Had to use a drill and saw to get the parts on right, but it fit and works still 2 months later! So it’s a reliable part so far.
Larry J Smith –
It was what I needed