Frete Grátis em todos os produtos
Descrição do Produto: A-Premium Rear Tailgate Lift Supports Shock Struts para Toyota Highlander 2008-2013
Os suportes de elevação traseiros A-Premium são a solução ideal para quem busca qualidade e compatibilidade para o seu Toyota Highlander, modelo 2008 a 2013. Este conjunto de 2 peças é projetado especificamente para modelos com Power Liftgate, garantindo um ajuste perfeito e funcionalidade superior. Com a referência de substituição 689500E071, 6895049355, 689500E71 e SG229037, você pode ter certeza de que está adquirindo um produto que atende aos padrões originais de fábrica.
Características do Produto:
– Compatibilidade Perfeita: Projetado para Toyota Highlander Base Premium/Base/Hybrid Limited/Hybrid/Limited/Plus/SE/Premium/Sport de 2008 a 2013, garantindo que os suportes se encaixem perfeitamente na porta traseira (esquerda e direita).
– Substituição Direta: Os suportes de elevação são substituições diretas dos originais, facilitando a instalação sem a necessidade de ferramentas especiais.
– Construção Robusta: Equipados com um selo de pistão à prova de vazamentos de alta resistência e um acabamento superior na haste que resiste à corrosão, proporcionando durabilidade e confiabilidade.
– Facilidade de Uso: O design permite um levantamento fácil e reduz o esforço necessário para fechar a porta traseira, melhorando a experiência do usuário.
– Embalagem Segura: O pacote inclui 2 suportes de elevação, embalados em um cartão grosso e um saco de coluna de ar, que oferece absorção de choque e proteção durante o transporte.
- Instruções de Uso:
Para instalar os suportes de elevação A-Premium, comece abrindo a porta traseira do seu Toyota Highlander. Remova os suportes antigos, utilizando uma chave de fenda para soltar os conectores, se necessário. Em seguida, posicione os novos suportes nos pontos de fixação, garantindo que estejam alinhados corretamente. Pressione firmemente até que os conectores se encaixem no lugar. Após a instalação, teste a porta para garantir que os suportes funcionem corretamente, levantando e fechando a porta com facilidade.
Características Técnicas:
– Modelo Compatível: Toyota Highlander 2008-2013
– Quantidade: 2 peças
– Referências de Substituição: 689500E071, 6895049355, 689500E71, SG229037
– Material: Aço com acabamento resistente à corrosão
– Tipo de Instalação: Direta, sem necessidade de ferramentas especiais
– Garantia: 1 ano sem limite de quilometragem
Perguntas Frequentes (FAQ):
Pergunta: Esses suportes são compatíveis com todos os modelos de Toyota Highlander de 2008 a 2013?
Resposta: Não, eles são compatíveis apenas com modelos que possuem Power Liftgate. Verifique a compatibilidade antes da compra.
Pergunta: É difícil instalar os suportes de elevação?
Resposta: Não, a instalação é simples e não requer ferramentas especiais. Siga as instruções fornecidas para um processo tranquilo.
Pergunta: Qual é a garantia oferecida para este produto?
Resposta: Oferecemos uma garantia de 1 ano sem limite de quilometragem, garantindo a qualidade e a durabilidade dos suportes.
Pergunta: O que fazer se os suportes não funcionarem corretamente após a instalação?
Resposta: Se você encontrar problemas, entre em contato conosco imediatamente para assistência. Estamos aqui para garantir sua satisfação.
Pergunta: Os suportes são resistentes a condições climáticas adversas?
Resposta: Sim, os suportes possuem um acabamento resistente à corrosão, projetados para suportar diversas condições climáticas.
Bob K. –
I installed this on my 2013 Highlander Limited AWD (power lift game and JBL speakers). I read some other reviews stating that these are a bit too powerful in lifting force. I took caution and only installed the strut on one side of my trunk and it seems to work very well. My old struts were not holding the trunk fully up anymore, it would sink back down and hit you on the head eventually, especially in the winter. They were very easy to install, easier than the OEM ones. just make sure to remove the pin on the ends first , slide them on and reinsert the pins. If the strut seems a bit long just push your trunk door up higher and the ball joint should go right in. Great value and so far so good.
RODELLO M. –
Facile à installer et vraiment efficace. ceux d’origine manquaient de vitesse, n’ouvrait plus la porte complètement.
Larry –
These are powerful it’s worth spending a little more money for these vs going cheap. The cheaper ones on Amazon hold up but was not strong enough to push the lift gate up when opening manually. These did the job and no more bumping head on lift gate.
Your Dad –
It works like the orihinal.
Michael J Green –
The product works good. But you need to buy the adapter kit. The factory mounts don’t come off.
Mihai –
This product should have been an easy install, but it would not go over the stud. Apparently the receiving port on the support is smaller than the stud on the car frame and would not go on, even with some persuasion from a rubber mallet. I even tried removing the retaining clip until installed to no avail. Do not buy this product. And we again come to an Amazon problem I have encountered many times…show the country of origin! Had I known this was made in China, I would have selected a different vendor. That country’s product quality leaves much to be desired. In all fairness, I have received at least one China product that held up to reasonable standards, but not this one.
Here is an update on this review. After having returned this item, it was purchased from another source with Turkey as the country of origin. The connections were made almost exactly like the original product with the same installation issues. As it turns out, the size of the stud receivers on each end were properly sized. The problem was in the clips used to retain the product on the studs. You are not able to force the ends onto the studs without removing the clips entirely. Once the ends are easily placed on the studs, then reinsert the clips. Again, not an easy task. So the problem was not an inferior product, it is an inferior design. Toyota wanted $51 apiece for the struts. Rockauto only wanted less than $10 each. I upgraded the rating to 2 stars because it is still a problematic product, but not seemingly made inferior.
More updates. After reviewing the video for this product, the retaining clips shown in the video are not the same as the product delivered. The video shows clips identical the the original Toyota design. However the product comes with wire retaining clips which are almost impossible to apply. That is false advertising on the part of the vendor. Back to 1 star!
steve –
In order to mount these struts you must remove a tiny silver clip from either end. The clip is small and hard to hold on to and almost impossible to install when the strut is on its mounting pin. I had to unbolt the mounting point brackets install the strut on the mounting pin and reinstall on the vehicle. One strut is not enough to hold up the hatch so I had to find a board to hold up the hatch while installing them. I had just used a different brand for the rear hatch back glass and they used the same clips as the original mounting clips and they were much easier to install back in the ball head. Once installed they operate correctly. I cant tell you how many times a dropped the little silver pin that held the strut on its mounting point but it was a lot!
Mihai –
Fit perfect, you might need someone to help holding the trunk up but so far so good
Hong K. –
2010 toyota highlander. Fits perfectly and very easy to install. Took me 5 mins to install both sides. It actually took me longer to take off the old struts since the old clips were so rusty.
Tip: remove the new clips completely off, position the ball mount on the mounting ball and then re-clip. Easy peasy!
EDIT:
A week since install and I have found out that the struts are so strong that they won’t allow liftgate to close and engage in lock position. I’m not sure if I can release some pressure from the struts but at this time, I must manually press the liftgate close.
Ranman –
Once installed, the tail gate works good as new. The gate is heavy. I used an extending painting pole to hold the gate in place while removing the worn out struts. It does help if there is another person to help reposition the gate while installing the new ones. The gate has to be positioned to the length that the strut comes because they are too strong to compress by hand. I also like the retaining clips on these. They snap right on. The gate does ‘bounce’ a bit at the top but I expect that to subside as the struts wear in.