Frete Grátis em todos os produtos
### Descrição do Produto
O Dasbecan TK78-66-9U0C Mazda Apple Carplay Android Auto Retrofit Kit é a solução ideal para quem deseja modernizar a experiência de conectividade em seu veículo Mazda. Compatível com uma ampla gama de modelos, incluindo Mazda 2, 3, 6, CX3, CX5, CX9 e MX5 Miata de 2014 a 2020, este adaptador interface para o sistema MZD Connect transforma a maneira como você interage com seu carro.
- Substituição: O kit de retrofit Mazda Carplay substitui as peças TK78-66-9U0C e K1414 00008FZ34, garantindo uma instalação perfeita e funcionalidade aprimorada.
- Compatibilidade: Este kit é adequado para os modelos Mazda CX3 (2016-2019), CX5 (2015-2020), CX9 (2016-2020), Mazda 2 (2016-2019), Mazda 3 (2014-2018), Mazda 6 (2016-2020) e MX-5 Miata (2016-2020). É importante notar que, se o seu carro não possui um dispositivo de conexão MZD, o kit não funcionará.
- Carplay e Android Auto com Fio: O kit suporta Siri para iOS e Google Assistant para Android, permitindo que você permaneça conectado ao seu mundo enquanto mantém os olhos na estrada. Acesso a navegação por mapa, contatos telefônicos, música e notificações traz mais conveniência ao seu dia a dia.
- Atenção: 1. Certifique-se de que seu sistema esteja na versão 70.00.021 ou superior; caso contrário, entre em contato para ajuda na atualização do firmware. 2. Durante a instalação, a conexão do Carplay é USB1, e o Siri deve estar ativado para conectar ao CarPlay. 3. Antes de atualizar o firmware, remova o cartão SD e insira-o novamente após a conclusão para evitar problemas na navegação.
- Atualização de Versão do SO: Este kit de Carplay funciona com a versão 70.00.021 ou superior. Se o carro apresentar desconexões frequentes do Mazda Carplay, isso pode ser devido à instabilidade interna do sistema Mazda. Atualize sua versão do SO para acima de 74.00.021 N AN/F AN para uma experiência mais estável.
### Instruções de Uso:
Para utilizar o Dasbecan TK78-66-9U0C, siga os passos abaixo:
1. Verifique se seu sistema está na versão 70.00.021 ou superior. Caso contrário, atualize o firmware.
2. Realize a instalação conectando o adaptador ao sistema MZD do seu veículo, utilizando a porta USB1.
3. Ative o Siri no seu dispositivo iOS para garantir a conexão com o CarPlay.
4. Após a instalação, remova o cartão SD e insira-o novamente para evitar problemas de navegação.
5. Para uma experiência otimizada, mantenha seu sistema atualizado para a versão recomendada.
### Características do Produto:
– Modelo: Dasbecan TK78-66-9U0C
– Compatibilidade: Mazda 2, 3, 6, CX3, CX5, CX9, MX5 Miata (2014-2020)
– Conectividade: Suporte para Carplay e Android Auto com fio
– Assistentes de Voz: Integração com Siri e Google Assistant
– Requisitos de Sistema: Versão do sistema MZD Connect 70.00.021 ou superior
– Instalação: Conexão via USB1, fácil instalação
– Atualizações: Suporte para atualização de firmware e versão do SO
### Perguntas Frequentes (FAQ):
Pergunta: O kit é compatível com meu modelo de Mazda?
Resposta: O kit é compatível com Mazda 2, 3, 6, CX3, CX5, CX9 e MX5 Miata de 2014 a 2020. Verifique se seu veículo possui um dispositivo de conexão MZD.
Pergunta: Como posso atualizar o firmware do meu sistema?
Resposta: Para atualizar o firmware, entre em contato conosco para obter assistência. Certifique-se de que seu sistema esteja na versão 70.00.021 ou superior antes de iniciar o processo.
Pergunta: O que fazer se o Carplay desconectar frequentemente?
Resposta: Se você estiver enfrentando desconexões frequentes, atualize seu sistema para a versão acima de 74.00.021 N AN/F AN para uma experiência mais estável.
Pergunta: Preciso de algum equipamento adicional para instalar o kit?
Resposta: Não, o kit é projetado para uma instalação simples e não requer equipamentos adicionais, além do que já está presente no seu veículo.
Pergunta: O que devo fazer se a navegação não funcionar após a instalação?
Resposta: Certifique-se de remover o cartão SD antes de atualizar o firmware e reinseri-lo após a conclusão da atualização para evitar problemas de navegação.
![Antena de Carro com Bandeira Americana - Acessórios de Decoração para Caminhões e SUVs [Novo Design Atualizado] Substituição de Antena para a Maioria dos Carros (Preto)](https://m.media-amazon.com/images/I/71mWdm92w9L._SL1500_.jpg)
Kevin –
YouTubeでも取付けされてる方がいらしたので、購入。自分でも交換取付けしました。海外からなので、届くまで1週間くらいは掛かります。
カーオーディオをご自身でされる方なら出来ます。配線通しと、本製品の元になる純正品をグローブボックスから4カ所のスナップフィット外す時が苦戦しましたが、手前側2箇所外した状態から少し回転する様に動かしたら手の入らない反対側のスナップフィットも外れました。
取付け後は問題なく動作し、Googleマップをモニターに映せる様になりました。iPhoneとは有線接続となりますので、無線Bluetoothでの劣化が無く、音圧が向上。勿論充電もされます。本製品のUSBと有線接続でYouTubeなどの動画は、(AppleCarplayのアイコンには無いのでモニターには映せませんが)音声は車のスピーカーから出せます。これが有線なので、今まで古いBluetooth規格での遅延が解消されました。音声が流せた仕組みが分からないので、どの車種でも出来るのかは分かりかねます。
Steven C –
Ordered and installed this unit on 8/1/23. In my 2017 Mazda6 Grand Touring.
Installation was pretty easy. As long as you are comfortable with carefully removing dash trim pieces and routing cables through your dash and console. The unit included foam padding to secure around the cabling to prevent chafing and rattling. Everything was included to perform a clean install if you take your time and consider the best paths to route and secure the cables.
Make sure you check your vehicles firmware version prior to ordering. A firmware update can be intimidating and could possibly brick your car’s infotainment system if not done properly. Luckily mine was already several versions above the required version and didn’t require an update for this inst.
11/12/23 started experiencing issues with car play disconnecting and reconnecting randomly while driving. I figured it was my cord so I ordered a new Apple certified cord. I immediately had the same problem with my new cord. I then tried my daughters iPhone with the new cord and had the same result. It’s frustrating but usually would connect and keep a connection to car play for a while when driving before occurring again.
1/7/24 Apple car play no longer works with this device. Ive tried multiple Apple certified cables that work with car play in my other vehicles. This device no longer operates at all. I’ve opened up my dash and console again and have ensured all cable connections are tight. I can plug in my iPhone and it will charge but Apple car play will not connect and be displayed on my screen.
3/22/24 it’s been a couple months without car play now. I’m frustrated and disappointed in this device as it worked well when first installed. I’m now looking for a similar device with better quality. At this time I would NOT purchase this product again or recommend anyone else purchase one as I did when I first installed it. Disappointed enough to write this review as I’m out the cost of this unit and hours of my time installing this device and then opening back up my dash and console to troubleshoot and inspect connections.
I’ve seen comments from other people who’ve purchased and installed this device around the same time frame with the same exact issue. Calling out a faulty unit after only a few months. If it is a faulty unit, I would hope the manufacturer or seller would
be willing to replace the unit. I’m an electronics engineer who also has a background in mechanics I would be more than happy to send you back my faulty unit for failure analysis.
Great concept but poor quality. A device of this sort should not start failing within 90 days of use in an automotive setting where it only gets maybe a couple hours of use each day. A total failure within 5 months of use is simply unacceptable for a product of this nature.
sakyuz –
I installed these in a 2014 Mazda 3. Really happy to have car play and android auto. Took about 3 hours for me to install. Could be quicker if you’re better with cars than I am.
sakyuz –
Que funcione
JSG –
Added CarPlay to a 2015 Mazda 3. Product fit exactly like it was supposed to and seemed like great quality. Significantly cheaper than the OEM kit from the Mazda dealer. Instructions were lacking but there are plenty of YouTube videos demonstrating how to install. Worked after install with zero issues.
TobycW –
A video on youtube had a link to this product. Not sure what the differences are between so many similar. This product ended up great. Quality looks very good. Had a thorough manual and OE looking cables and module. Had a bunch of zip ties and foam included. Once installed in my 2017 MX-5, everything worked perfectly. Had full use of the steering wheel buttons and center console buttons. I am not sure but I think Mazda locks out the touch screen when in motion.
Install on an MX-5: I did not remove the shifter console! It took about 45 minutes in all. Follow the youtube video to get to the cmu. Then do the following: For the USB module, remove the passenger side center console side trim in the footwell. Remove the “H” looking trim to the sides of the USB module. Remove the Seat heater controls/airbag lights module above the USB module. From the side where you removed the passenger console trim, you should see top and bottom clips of the USB module you want to remove. Take a long but small flat head screw driver and one-by-one break the clips. It should be easy to push it out from behind now. Saved me so much time doing it this way and I hope it does for you too! Remember, all trim is held in by clips or fits like a jigsaw puzzle. NEVER force anything. A nudge and a pull should be all that it takes. I broke nothing on mine installing it. There are a couple of good youtube videos for the MX-5 that you can look at before you start.
Juan P. –
Installation was slightly more tricky than expected – there was a screw under the cup holder in my central console that wasn’t in the videos I watched, and fishing the cable behind the dash was a bit hit and miss. Also had to upgrade the software from version 59 to 70.
However finally got it done over the course of a couple of hours and it works great. Was about a quarter of what the dealership wanted too!
Steven C –
No complaints after having it installed for a few months now. Everything works perfectly. Make sure you follow the steps and its an easy (if slightly back breaking due to limited space) install. Plenty of youtube videos show the exact breakdown of the install.
June 2024 update: stopped working a little over a month ago. Plugging phone in will charge the phone but won’t trigger androidauto or applecarplay. Also tried changing wires without success.
Digital Donkey –
The Dasbecan Apple Carplay Android Auto Retrofit Kit is not just an upgrade; it’s a revolution for your Mazda 3 driving experience. This kit seamlessly brings the cutting-edge connectivity and convenience of Apple Carplay and Android Auto into the cockpit of your Mazda 3. It’s like giving your car a brain transplant, upgrading it from a regular vehicle to a smart, connected companion.
The installation process is a key highlight. Designed with the Mazda 3 in mind, the retrofit kit fits like a glove. It’s a relief to find an aftermarket product that meshes so well with the existing system. The integration is so smooth, it feels like these features were always meant to be part of your car. For those who are not mechanically inclined, a professional installation is a good idea to ensure everything is up and running perfectly.
Once installed, the functionality is a game-changer. The system brings the familiar interface of your smartphone to your car’s dashboard. Whether you’re an iPhone devotee or an Android aficionado, this kit bridges the gap between your phone and your car. Maps, music, messages, and more are all at your fingertips, or better yet, a voice command away. It’s a seamless transition from your digital life outside the car to inside.
The user experience is smooth and intuitive. The response is snappy, and the interface is user-friendly. It’s like your car’s infotainment system got an upgrade to first-class, with all the modern conveniences you could ask for. The integration with existing controls and the touch screen enhances the overall driving experience, keeping you connected without being distracting.
The quality of the components in the kit is top-notch. Everything feels well-made and durable, which is reassuring when you’re modifying such an essential part of your car. The attention to detail in design and manufacturing means that this retrofit kit doesn’t just add functionality; it also adds value to your vehicle.
TL;DR: The Dasbecan Retrofit Kit is a must-have for Mazda 3 owners looking to modernize their ride. It brings the ease and functionality of Apple Carplay and Android Auto into your car with a seamless, integrated experience. The kit not only enhances your driving experience but also adds value to your vehicle with its high-quality components and intuitive design.